Can a single database be used for two operation system in a single machine

Hi,
I have a typical question. My problem is that in my testing machine I have Linux Enterprise(UFS file system) and Windows XP(FAT partition) both installed as dual partitions..
In Linux I have mounted the Windows XP file system as read write , so I can access the Windows file system from my linux.
I have Oracle 10g on Windows XP with datafiles in my F:\ location.
This location F:\ of windows is mounted as /datafile on Linux.
Now my question is If I install an oracle instance in Linux OS of my system, can I use the same datafiles I am using for my windows?
Regards
Vineet

Hi,
No, because, as you wrote F:\ of windows... /datafile on Linux, the datafiles directory are committed into the system tablespace. Also, you can see that the absolute same directory is not mentionned as the same way.
For example for Windows database : select member from v$logfile; will give D:\oracle\oradata\DB1\log\redo01.log
And into Linux, the same query /oracle/oradata/DB1/log/redo01.log
There is no automatic translation between the both systems when Oracle start.
HTH,
Nicolas.

Similar Messages

Can a local database be used for ORACLE

Hi,
I am new to ORACLE.
Can we use a local database for ORACLE?
If so, what are the steps to create a local database in our machine?
Thanks,
Krishna.

Hi,
Thanks.
I have heard of the DBCA to install a local ORACLE database
But I think it is an ORACLE client that is installed in my machine.
Can I request my network system services to install a local ORACLE database?
Will that be of some help.
Thanks,
Krishna.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

How can my wife and I use our two iTunes account on one iPad

How can my wife and I use our two iTunes accounts on one IPad

Unfortunately it will be difficult. iPads are personal devices like phones and done have credentials. You can of course log out of and into the app store to download purchased apps but the iPad will then have all the apps of both your wife and you (though you could put these into folders I guess).
/H

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

Can HTTP Receiver adapter be used for Sync Comm. Pls advice urgent

Hi All,
I have some data present in XI.
I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
Please send blogs/link for it
Regards

Hi Henry,
>>I have some data present in XI.
In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
First let us know this.
Thanks,
Gujjeti

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

On Apple TV. Can the USB port be used for a keyboard and mouse interface

On Apple TV. Can the USB port be used for a keyboard and mouse interface

A bluetooth keyboard can be used with the Apple TV.
There is no need for a mouse with an ATV.

HT1665 Can iPhone car charger be used for latest iPad?

Can iPhone car charger be used for new iPad?

Probably not. The iPhone charger is 5W whereas the iPad requires a 10W charger. The iPhone car charger will probable charge the iPad, but very slowly.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT4327 Can iPhone 4 charger be used for charging iPad2

Hi!
Can iPhone 4 charger be used for charging iPad 2 ?

It can BUT it will be Very Slow... Best to use the iPad Charger if you can...

Can we connect one R/3 to two BW systems and extract data?

Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
Thanks and regards.
Ankush Shejul

Of course you can.
Just have to have the RFC destinations in place and use the
CALL FUNCTION '....' DESTINATION '....'
commands in ABAP, check out the ABAP forums for more info.

Use for each operation

how can I use for each operation in jdeveloper 11.1.1.5.0 in adf fusion web application to show images stored in database?

How are the images stored in the database?
If it has the path - create the VO and show the images using foreach by creating a tree/table binding in the pageDef as follows:
<af:forEach items="#{bindings.BillToStateLOV.rangeSet}" var="item">
<af:image id="si9" source="#{item.src}"/>
</af:forEach>
If the images are stored as BLOBS, take the approach as mentioned in the blog post:
http://baigsorcl.blogspot.com/2010/09/store-images-in-blob-in-oracle-adf.html
Thanks,
Navaneeth

Windows 10 TP - Build 9879 - WIMBoot incompatibilty - "Windows can't be installed because this PC uses a compressed operating system."

Ran into an issue installing the W10 TP today; currently using a laptop who's manufacturer load up windows 8.1 using WIMBoot to save space on the SSD.
Because of WIMBoot, the W10 installer detects that "Windows can't be installed because this PC uses a compressed operating system."
This means that, short of redoing my Windows Install from scratch, I have no way to install the W10 TP, either through the ISO or through Windows Update.
Any chance that this will possible in a future build?

Wimboot needs an image file, that HP uses with Windows8.1 + Bing on
Stream 7 tablet & HP stream laptops11.6" & 13.3"
Hp turned windows 8.1 into image file for using 32gb sd storage
windows 10 until finalised will not be an image file
bye retired techie
This is quite unhelpful, as I am in the same boat on an HP Stream 11, and many others are in this boat as well
According to the System Requirements page for the latest technical preview, Windows 10 is unsupported on
all 16GB WIMBoot devices, but only incompatible on
some 32GB WIMBoot devices, thus seeming to imply that some WIMBoot devices are indeed compatible.
The question is, why are some WIMBoot devices upgrade compatible while others are not? And is it possible to work around this limitation while retaining the WIMBoot configuration and user data, as an option for advanced users?
Furthermore, Windows 10is an image file (install.wim is what's used to install, refresh, and restore Windows). WIMBoot devices, from my understanding, use the install.wim (which currently contain the Windows 8.1 OS) in
a read-only mode, only applying updates and changes as files on the C: drive (so any updated files are located on C: and the originals within install.wim ignored?). Problem is, there has yet to be any explanation from Microsoft, for OEMs or consumers,
on how WIMBoot devices are to be upgraded in the future, as WIMBoot was only introduced with Windows 8.1, and so there hasn't been any major consumer releases of Windows that these devices would upgrade to.

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

Look in the HD/Applications folder.

Can a single database be used for two operation system in a single machine

Similar Messages

Maybe you are looking for