Can a submit button carry out more than 1 action ?

I want to give show feed back after a survey question but I want to do this whilst the answer that the user has given is still on the page.
I have assigned a show comand to the submit button which makes a text box visable however the play head carries on and the slide progresses to the next one.  Is there a way to pause the time line and advance on a click after the feedback, what I think I want is for the submit button to carry out several action  or am I going about this the wrong way?

Hello,
Could you tell if you are using the default Question slides for this survey question or did you create your own slide using standard objects?
I'm a bit puzzled about it because you mention the 'Submit' button, that is why I supposed you are using a default Question slide. You can assign an advanced action which can have more than one action of course. But this will not solve your issue. If you want to stick with default question slides that allow you limited control I could make this suggestion:
create the hidden text caption,
increase the default duration of the question slide; typically it will pause at 1.5sec, increase the slide duration so that the text caption that will show up stays long enough for the user to read it
show the text caption for the rest of the slide
attach the success action to the Submit button as you did to show the TC
When the user clicks on Submit, the Text Caption will pop up  but the playhead will continue till the slide is finished. AFAIK you will not be able to stop it, but now the user will have sufficient time to read.
The best solution is to create your own survey slides, then you can add as many interactive objects as you wish.
Lilybiri

Similar Messages

  • How can I change all of (or more than one) speaker note to a voice at once?

    Hello... 
       I have a lot of speaker notes that I need to apply a specific voice to.  How do I apply the same voice to all of the speaker notes in the whole project at once?  Or at least more than one?  Any help would be appreciated.  Thank you!   I am working with Captivate 6.

    Hi Vikram,
      Thanks. That tip definitely helps!  You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices.  If you do that, then the drop down box becomes “unclickable”.  Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
    Ryan
    Von: VikramGaur [email protected]
    Gesendet: Donnerstag, 20. September 2012 16:25
    An: Scharfer, Ryan
    Betreff: How can I change all of (or more than one) speaker note to a voice at once?
    Re: How can I change all of (or more than one) speaker note to a voice at once?
    created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

  • How can I enter my podcast in more than one category?  Mine covers arts, education and society and culture, but is listed as "Performing Arts".  Thank you for your time!

    How can I enter my podcast in more than one category, to reflect the fact that it covers arts, education and society and culture?  Thank you for your time!

    You can have more than one category - this page shows you how the tags are formed:
    http://www.apple.com/itunes/podcasts/specs.html#category
    The Store will list only the first category and its sub-category at the top of the page. Like the first category, the others will in theory make your podcast available for searching by category. However searching just on the category in the iTunes Store is most unlikely to throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on one page the entire list for any category. What you see are 'featured' podcasts, chosen by Apple as being special; please see this Tech Note:
    http://www.apple.com/itunes/podcasts/specs.html#getfeatured
    Note that there is no way you can influence the selection other than making your podcast really special.
    If you have further questions about making your podcast it's better to ask them in the Producing Podcasts forum.

  • Can I  have Apple TV on more than one tv?

    Can I have Apple TV on more than one tv and can I use one netflix subscription on both tvs (connected to Apple TV)?

    You'd really need one AppleTV per TV - as for Netflix check your subscription package, in UK I can play on 2 devices with my current subscription or 4 for a higher fee.
    AppleTv only has a single video out, so even if you relay the output of AppleTV to 2 TVs it would show the same content.

  • How can I sort a table using more than one column in Numbers or in Pages?

    How can I sort a table using more than one column in Numbers or in Pages?

    Hi Ron,
    On the right side of the Toolbar click the Sort and Filter button, then select Sort.
    You can then set up a multiple column sort.
    Click Add A Column, Specify the sort for that column, Repeat.
    Jerry

  • Does Garage Band 10.0.3 provide multi channel outs (more than 2)?

    Does garage band 10.0.3 support multi channel outs (more than 2)?  I have an external mixer which can handle up to 8 at a time.  I use the Focusrite Pro 26 and it does fine with GB, but I cannot find a way to get more than 2 channel stereo out of GB and send them to the Pro 26.
    Thanks for any help you can offer.

    Hang Time,
    Thanks for your reply to my question.  I read elsewhere that GB has only 2 outs, but I wanted to get a second opinion. 
    I think I will try Pro Tools/First.  PT/First It is a new Free version of PT that will be available soon; it has a lot of capability for a free version of PT.

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • Key Out More Than One Colour

    Hi
    I wondred if there was any way of keying out more than one colour in FCP 5.
    Thanks...

    You can use the shift key to add a secondary color, and/or you can add another keyer to add more colors...
    Jerry

  • Submit Button Greyed Out (v 4.0.5)

    I have been using Compressor successfully for about a year.  Recently it updated to v4.0.5.   Now I am not able to submit, with the final Submit button greyed out.  I have checked my Destination folder permissions and all appear correct.
    What could be the cause of this, and what shall I do?  I need to render a program urgently for broadcast.
    Thanks
    Geoff

    I just resolved a similar problem.  I am running OSX 10.6.8 on a MBP 13" 2010.
    Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
    I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder.  This did not fix the problem on its own.
    They then had me delete the Apple Qmaster folder from user>library>application support.  This did not fix the problem on it's own.
    I then reinstalled the Compressor application itself.  This did not fix the problem on its own.
    I then verified permissions and repaired permissions using disk utility.  This did not fix the problem on it's own.
    I then clicked on "Share Monitor" which is found on the Compressor task bar.  "This Computer" was displayed in the left column.  I simply clicked on it in order to high light it.  I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
    YMMV.

  • How can I return files in Trash, more than 1 at a time? I can place many files into Trash at a time.

    I placed many unix.exe files into Trash, more than one at a time. I recently updated 'QuickTime' and the Mac version of 'SilverLight"
    (name might be totally 'correct). I don't know if removing these files can impede my iMac 2008 running OS 10.6.8(updated SnowLeopard).
    I know I can 'return' one file from Trash at a time. When I try to return more than one ('mouse click' and 'drag'
    over 2 or more files, the'return' option isn't listed. Is there a way I can either 'return all' or return more than one file
    at a time?

    Only one at a time. But where are they from? Did you delete system files or are these Windows files (.exe is a Windows extension?)

  • How can i use Itunes to update more than one IPad with more than one owner

    How can i use Itunes to update more than one IPad with more than one owner?  I own an IPad and my wife owns an IPad.  I want to use my system to update both IPads.  We have different Apple Accounts and different applications.  Is this possible?

    Of course, that is too easy.  I am such a bonehead.

  • Can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

    can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

    Yes, You can install and use the Adobe application on 2 computers (not more than 2).
    You can get the details, http://www.adobe.com/products/creativecloud/faq.html
    Can I use the software I download from Creative Cloud on multiple computers?
    Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership. See theproduct license agreements page for more information.

  • Can I load my Itune on more than one computer?

    Can I have ITunes installed on more than one computer, and sync with I-Phone and IPAD2?  How do I keep the files the same on both computers?

    you can authorize up to five computers you control for your iTunes store account.
    you can use home sharing to keep the libraries on them in sync.
    by design, iPhone and iPad can sync with only one library at a time.
    however, you could consider Managing content manually on iPhone, iPad, and iPod.
    also see Using iPad or iPod with multiple computers.

  • Can I install purchased apps on more than one iPad that i own?

    Can I install purchased apps on more than one ipad that I own?

    Yes, you can install them on more than one device.

  • Can i assign one vendor to more than one company code how?

    can i assign one vendor to more than one company code how?

    Hi,
    If u create vendor in XK01 then there will be three segments which are general data, company code and purchasing organziation data. General Data will be available at client level so that u can use the vendor across company codes just what u need to do is that u have to give the company code data when ever u r creating for a new company code.
    regards
    srikanth.

Maybe you are looking for