Can a thousands separator be applied to a row of numbers?
I'm using Numbers on my iPad and would like to know if a thousands separator can be applied?
Numadel,
In Numbers iOS flip the Separator switch to On:
In Numbers for OS X on Mac tick the Thousands Separator box:
Basically the same.
SG
Similar Messages
-
Please help! Can't make commas (thousands separator) appear in numbers
I open Pages. I type in a number (123456). While cell is still selected, I open Inspector and select Cell Format = Number. I then check the Thousands Separator checkbox. It does NOT put commas in my number.
Any help greatly appreciated!A couple of thoughts:
First, make sure you have US formatting as the default for numbers (not the program Numbers) in System Preferences > International > Formats.
In the table inspector click on Format & make sure the cell is formatted to number & press Enter/Return/Tab to move out of the cell & see if it "takes" then.
If none of that works, it could be corrupt preferences. Quit Pages & then delete the com.apple.iwork.pages.plist file found in HD > Users > (your account) > Library > Preferences.
Fruhulda,
The thousands separator in the US (where the OP is) is a comma & the decimal is a period/full stop/dot.
Message was edited by: Peggy -
Thousand Separator is Not Appearing in Amount Fields in iRecruitment
Hey Guys,
My requirment is to show comma as thousand Separator for example 10,000 but its showing 10000.
I am facing this issue in all amount fields in iRecruitment like Vacancy Page (Min Propose and Max Propose) and Offer Page.
I set the below profile options
Currency:Thousands Separator = Yes
ICX: Numeric Characters = 10,000.00
and
Preferencess > Regional Section > Number Format = 10,000.00
I am using EBS 12.1.3 and i cleared cashe but still no effecet. Is there any other setting need to be done?
Please Help
Regard
Mazhar HussainWhen i go through Patch Description
Patch Applicable for versions:
Iprocurement R12
5. Dependant Applications:
None.
6. Patch to be applied:
Server.
7. Patch applicable only when a particular application installed:
Oracle Iprocurement.
Its say that Patch for Iprocurement so how can i apply this patch for iRec?
Regrds
Mazhar -
How to put SPACE thousands separator
Hi there, I'm thinking how to format following numbers, eg: (integers)
150000
2000000
and I would like to export them as CSV file from sqldeveloper to MS Excel and displaying them like =>
(with space separator)
150 000
2 000 000
without Excel (formatting), so since beginning, Excel will see it as number with space thousands separaors
Could You help me?Hi,
This is an Excel problem. You'll have to do something inside Excel to recognize that column as a number and display it with spaces.
As you pointed out, Excel's default behavior, when it sees an embedded space in the column, is to treat the column as text.
Excel's default behavior (at least on my system) is to use ',' as a thousands separator, if it uses a separator at all.
If that column is going to contain spaces and be treated as a number, then you need to override Excel's defaults.
This is an Oracle forum You may get lucky, and find someone who knows enough about both Oracle and Excel to solve your problem completely. I'm sorry I don't know enough about Excel to do it for you. The most you can expect from an Oracle forum is for someone to show how to produce a certain type of CSV, but you'll have to spell out exactly what that CSV has to contain.
For example, if you can find some string of characters that tells Excel "the folloiwng column of the CSV is a number, and should bne displayed with spaces as the thousands separator", then someone in this forum can help you produce that output with that string of characters in Oracle. -
Amount field with thousand separator
Hi friends,
i want to display amount field (5794.00)with thousand separator as (5,794.00).
i defined amount field as character data type for my requirement.
user want to see this value with thousan separator.
Please help me hoe can i get thousand separator.
Thanks
rameshHi Ramesh,
There is two functions for converting display currentcy
CURRENCY_AMOUNT_SAP_TO_DISPLAY
Convert currency value from value stored in SAP to displayed currency
CURRENCY_AMOUNT_DISPLAY_TO_SAP
Convert currency value from displayed currency value to value stored in SAP
Try below,
DATA declaration
WMTO_S-AMOUNT = Type DEC :: length 15 :: Deciamls 4
parameter: p_discur like TCURC-WAERS, "Display currency
p_intval like WMTO_S-AMOUNT. "Internal Amount
data: gd_disval like WMTO_S-AMOUNT. "Display Amount
*Start-of-selection.
START-OF-SELECTION.
CALL FUNCTION 'CURRENCY_AMOUNT_SAP_TO_DISPLAY'
EXPORTING
currency = p_discur
amount_internal = p_intval
IMPORTING
AMOUNT_DISPLAY = gd_disval
EXCEPTIONS
INTERNAL_ERROR = 1
OTHERS = 2.
IF sy-subrc EQ 0.
You are now able to manipulate the returned value.
I.e. Convert it to GBP
Without using this function module you would only be manipulating the
SAP stored value, which is often missing a number of zeroes.
I.e. 28000 JPY is stored within SAP as 280.
ENDIF.
*End-of-selection.
END-OF-SELECTION.
write:/(30) 'Value stored in SAP:', p_intval,
/(30) 'Displayed currency:', p_discur,
/(30) 'Ammount is displayed Currency:', gd_disval.
Hope it help
Wiparat -
Thousands separator when displaying year in dashboard prompts
In our reports, when we include just the year field in prompts, they display with a thousands separator (e.g. 2,012 for the year 2012)
Does anybody have any ideas on how to fix this. We are on 10.1.3.4 but any hint would be helpful.Change the year column data type to INT in the physical later. Or you can change the column properties of the column in Answers.
Hope it helps.
Regards,
Kalyan Chukkapalli
http://123obi.com -
Hi,
I made a table in a slide. I wanted to add numbers in the table, and I wanted the numbers look like this format:
75,000,000
But the problem is that it shows me the number looks like this format:
75000000
If you can see the difference here is that the first one has the (thousands separator) whereas the other one don't.
How can I make numbers which have the (thousands separator)?
BTW:I checked the choice that says(thousands separator) in the table>format.
Remember:I don't want the decimals. I want the little comma (,) between thousands.
regards
tasi2006,tasi2006,
Check your numbers format in:
+System Preferences > International > Formats > Numbers+
Is it showing there with the correct comma dividers? It should follow the region conventions.
Narrow down the problem by testing in other apps.
It is working in my test. Can you confirm all the settings you have used and whether you have overridden anything with custom conditional format. Also which template you are using so that I can match that.
Peter -
Thousand separator in MS Excel 2010
I recently upgraded to Microsoft Excel 2010 and I am having an issue in the formatting of my numbers. The thousands separator (comma in my country) is only being applied to the last thousand bucket but all other thousands above that are not being separated.
For example, 1,000,000 (one million) is being displayed as 10,00,000
I have read through hundreds of questions and answers in various forums but no one else seems to be having this issue. At my company, every person who has been transitioned to Excel 2010 is experiencing the same problem. I have tried searching and changing
settings, advanced settings as well, but nothing seems to work. Please help me.
I am a financial controller and my reports are very cumbersome when i cannot read the numbers easily.
Many thanks.
Kind regards,1. In Windows 7 go to the Control Panel then click on:-
Clock, Language, and Region
In the:-
Region and Language
- section click on:-
Change the date, time, or number format
The:-
Region and Language
- window should open.
2. In the:-
Region and Language
- window click on the button called:-
Additional settings . . .
The:-
Customize Format
- window should open.
3. In the:-
Customize Format
- window click on the:-
Numbers
- tab (if it has not already been selected) then make the changes that you want.
On my pc (which is set up the way that you want it) the following are the settings:-
Decimal symbol: .
No. of digits after decimal: 2
Digit grouping symbol: ,
Digit grouping: 123,456,789
Negative sign symbol: -
Negative number format: -1.1
Display leading zeros: 0.7
List separator: ,
Measurement system: Metric
Standard digits: 0123456789
Use native digits: Never
Click:-
OK
EXCEL should now return to the window called:-
Region and Language
Click:-
OK -
Issues with thousand separator
Hi all. can anyone help me. In my PDF form i create a numeric field. I set numeric format with these parameters:
Decimal places = 0
Separator style = 1,234.56
Currency symbol none.
but for all that feild displayed value as "1234.00". to remove zeros i add javascript for this field: this.getField('1').value=0+this.getField('1').value; Now it show like "1234". but I'm still looking for solution to show thousand separator. Please helpIt doesn't help. I forgot to say 1 detail. field works fine when I change value manualy in Acrobat, but I use web service to fill data in pdf (when it done the file becomes read-only). and when pdf is filled I don't see separator
-
Remove thousands separator from chart (x, y axis)
Dear all,
my first application is almost completed, but some finishings are still missing.
E.g. the display of the year in the chart contains thousands separator. How they can be removed or avoided? Any idea?
Thank you so much!
MehtapHi Tammy,
thanks. But this does not seem to work for Calendar Year. -
Thousand separator in RFC-type-based field
Hi everybody,
I am developing a WDPJ application where every input field is bound to an R/3 RFC data type.
An automatic validation is performed on the data type (i.e. if the user types 'hello' in a numeric field an error is displayed).
I would like the field to automatically validate also thousand separators just as in standard R/3 transaction (i.e.: 3.000 is ok, 3.00 is not ok, where thousands separator is dot). Actually the validation simply ignores the thousand separator if not in the proper position (3.00 becomes 300).
Can anyone please help?
Thanks in advance, points will be awarded
VincenzoHi,
I assume that you have already written some validation code for this field in Webdynpro Java. If your requirement is to validate the number of zeros after the . then you can user StringTokenizer or String.split() and find the number of digits after the thousand separator.
regards
Srini -
Help - Add Thousand Separator to Whole Number
I am unable to figure out how to add a thousand separator to a whole number. I guess removing the decimal places from a decimal number would work as well. It is driving me insane. Example - I have a decimal number 1,299.00 that
I would like to show as 1,299. If I change it to a whole number it shows 1299. I can't find where to show the thousand separator and make it 1,299.
Thanks,
Mark
Hi Mark,
Thanks for your feedback. We're working to enable formatting capabilities in our reports and this would be a good example of a formatting option that we would offer.
Please leave us a vote for this or any other feature that you would like to see in Power BI, in our UserVoice forum:
http://support.powerbi.com/forums/265200-power-bi
Thanks,
M. -
How to change thousands separator in IP Web-template?
Hi all,
Situation: in IP web-templates (planning format or report) I see values of key figures in format like 12,345,678.99 . But I need replace comma thousands separator to space: 12 345 678.99. How to do it?
What has been done: in su01 I've tried to change 'Decimal notation' from '1,000.00' to '1 000.00', but this setting doesnt have any influence on appearance of key figures values in my IP web-templates.
Any comment and ideas are welcome.
Best regards,
Andrey.I think you probably got to play around with the objects of javascript and uncheck the apply formatting option of the table i.e dataprovider item otherwise the settings will have no effect on the dataprovider.
-
Thousand Separator as Comma instead of Period
Hi mates,
At the moment my KF is being shown as 206.338 instead of 206,338.00
Please advice how can I have a comma as a Thousand Separator instead of the Period(dot)
ThanksHi John,
Try to make changes in the menu Sytem-> User Profile -> Own Data -> Default Tab-> Change Decimal Notation.
Hope it may help you!!!!
Regards,
Amit -
How can i get all these values in single row with comma separated?
I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/
Maybe you are looking for
-
Hi all, i have the following code: DROP TYPE unit_function FORCE DROP TYPE unit_moving_point FORCE DROP TYPE moving_point_tab FORCE DROP TYPE moving_point FORCE DROP TABLE moving_object_ref DROP TABLE moving_point_ref CREATE OR REPLACE TYPE unit_func
-
Connection Refused Error while running AS ABAP Initial Load
All, I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what. We are in the process of trying provision user accounts to our SAP ABAP systems. My firs
-
Configuring Message Clasifications Exchange 2010 - Outlook 2007/2010/2013
Hi I created Message Classification as described in: http://technet.microsoft.com/en-us/library/bb123498(v=exchg.141).aspx New-MessageClassification .... New MessageClassification is visible in OWA. I stared deploy Message Classifications for Outlook
-
Time series functions in OBIEE
Hi I am new to OBIEE. In Report i want to use the AGO function to find the previous quarter revenue But the AGO function requires time dimension level as shown in following syntax how should i insert it in the function Syntax AGO(expr, [time_level],
-
My keyboard doens't work with keynote
I can't seem to control anything with my keyboard on Keynote. Anybody else having the same issue?