Can a Transparent mode firewall use /30 and still work.

Here is my question, I have a ASA 5510 that is connected to my ISP and the inside interface that is connected to my router.  I have a /30 and need to determine if the configuration of x.x.x.121/30 which is my ISP and also the BVI address on the ASA.  The inside router address is x.x.x.122/30 same subnet as my ISP will allow me to pass traffic.  Management interface works using a different ip address but not able to get the traffic to pass traffic out to the internet thru the ASA
ISP-------->ASA-------->Router 
Bottom Line is that I only have one usable address that is being used by the router and the ISP and ASA are using the other.  Will this work?

Transparent firewall needs a management ip address in the same subnet as the passing traffic. Also please check the vlans of the switch port (if any) of the outside and inside interfaces. The vlans needs to be different for both interfaces.
Posted by WebUser Fawad Khan from Cisco Support Community App

Similar Messages

  • Can I subscribe to Creative Cloud monthly, and still work with my Photoshop on my computer OFFline??

    Hi, I just got a new iMac, and was wondering if I should put my current PS CS5 from my macbook pro onto it, or should I just go with the monthly subscription? My issue is that I work with no internet a lot, and am worried that will be a problem. And if it is better for me to just keep my CS5, how do I get that onto my new iMac now that there are no disc drives to install? Thank you in advance.

    You can use prepaid 1 year Creative Cloud plan software offline as long as your computer is connected to the 'net every 99 days or less.
    Reference:  5 Myths About Adobe Creative Cloud - Terry White's Tech Blog
    -Noel

  • How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad

    How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad

    You don't. Mirroring is duplicating your ipad screen on another projector - so you can't have another app going on your iPad without it also showing up on the projected image. Some apps are designed so that you see a different image in the iPad than the mirrored out display, but even then you're within the app itself.

  • I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain.

    I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain. What can I do so that I can connect other devices to my Wifi?

    Read the router's user manual on how to change your password.
    If you are going to select another password, make sure it's one that you will NEVER forget AND no one else can figure it out.  Print it out & keep in a safe place.  A place that ONLY you know about AND never forget.

  • Can I have a custom RTP payload, and still use a MediaLocator?

    Hi,
    I think I am a little confused. Can I have a custom RTP payload, and still use Manager.createPlayer(MediaLocator locator) to create my player?
    This doesn't seem possible because the RTPManger's addPayload(Format format, int payloadType) method isn't static, forcing me to always create my RTPManager first.
    Is this a valid observation, or am I missing something?
    Your comments are highly appreciated.
    Kind regards,
    Erwin

    Thanks for your prompt reply.
    The short answer is yes.
    The MediaLocator is used to identify the source, or destination for a media stream. For example this could be a file (file://c:\mydisk\audio.wav) or a URL (http://mydomain/music/audio.wav)
    Ok, I get that, but the MediaLocator is also used to identify the protocol, rtp in this case, and the protocol in its turn is used by the framework to locate the DataSource. I am not suggesting what you write is incorrect, I am only trying to understand how this works the way it does.
    RTP is used to transport streaming media in real time over a network (usually UDP).And that is exactly what I need it for.
    The receiver of an RTP stream is an RTP receiver. Players take the datasource(created from the MediaLocator) and feed the data to the RTP manager so it can be streamed across the network or vice versa.
    The vice versa part is what I am interested in. I need to handle a proprietary video format, packed as RTP, and shipped over UDP. My initial approach was to simply register my DePacketizer with the PlugInManager, and add my custom payload type to the RTPHandler (addFormat(Format fmt, int type)). That obviously doesn't work.
    So what I'm trying to convey is that the MediaLocator used in creating a Player will be different, and is used for a different purpose, than the Internet address, and Port used to create an RTPManager.I need a good night of sleep to think that over. I.m.h.o. there is no reason to handle "http://host:port/video/whatever.ext" different from "rtp://host:port/video/whatever.ext". The only difference is that in the first case I can build my graph based on the extension of whatever, and in the second case I have to wait for my first packet in order to determine the payload type. In both cases I expect "DataSource ds = Manager.createDataSource(ml) to work (and it probably does for the standard payload types).
    The JMF framework has a .../media/protocol/rtp/DataSource class as well as a .../media/protocol/http/DataSource class.
    Is this making any sense?Not sure yet, but I certainly appreciate your help.
    Note: In general you don't need to create a custom Payload for RTP.
    What if I want to ship a proprietary video format?
    Thanks a lot,
    Erwin

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • How can i transfer my rarely used applications and files so i can make room on my computer harddrive?

    how can i transfer my rarely used applications and files so i can make room on my computer harddrive?

    Well the applications you should leave alone as they install files elsewhere that are needed like preferences etc that won't be on the external drive if you attempt to run it from there.
    Some programs are completely self contained and will run just fine from a external drive, but applicaiton's are usually small.
    Now your user files! That could use some thinning for sure! Especially stuff you don't use that often and Video files which take up a lot of space.
    You can buy a external USB drive at any office / computer supply store and just plug it in and backup files via drag and drop.
    What happens when you plug in a drive is TimeMachine will pop up and ask to make it a TimeMachine drive, this just backups up everything on your computer to restore from in case your OS X or boot drive fails. It's a image of your drive and so whatever is on the boot drive is on the TM drive. So that doesn't server your purpose which is you want to free some space off your main boot drive.
    However you should get another drive and allow TM to do it's thing to that drive, also to make a hold option bootable clone of your boot drive (using yet another external drive) using Carbon Copy Cloner or SuperDuper so in case your boot drive fails you can quickly and easily boot off the clone and have a working machine right away.
    One of the posters here has a excellent instructions what does what, both should be used to backup your data.
    http://web.me.com/pondini/Time_Machine/Clones.html

  • I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

    I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • How can I make Final cut pro 7 and Yosemite work?

    Hi dear Apple.
    I have this huge problem with Final cut pro 7 and Yosemite.
    I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
    I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
    I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
    How can I use Yosemite and still be able to keep Fcp7?
    Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive. 

    Hi Meg the dog! Thanx for answering!
    I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
    I did try this recommended on the forum by another user:
    Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
    But it doesn't work for me. I can't launch fcp7.
    I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
    I tryed to export XML to work on premiere and this is what happends:
    Any recommendations? I am going crazy here..

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • Can I delete all my inbox mail and still have it on my pc or iPhone 4s since there's an iCloud ?

    Hi! May i please ask if I can delete all mails in my inbox and still have it on my pc? I'm using iPad and iPhone 4s. Because my iCloud storage is quite full. Thank you so much for your kind assistance.

    How soon can I have the answer for this inquiries so I can start deleting my emails on my iPad or even on my iPhone 4s? And start receiving new batch of emails form my 3 email accounts. Thanks again!

  • How many Airport Expresses can you link and still work properly

    How many Airiport Expresses can you link and still work properly.

    It would depend on whether all of these base stations will be interconnected by Ethernet or by wireless and what your goal is with them.
    In a roaming network, where all base stations would be connected by Ethernet, you could have 10+ base stations. Apple has never (at least to me) any limits on the number of base stations that can be used in this type of network.
    In an extended network, where all of the base stations use wireless connections, the practical limit would be 4 or 5 base stations.

  • My ipad imessages are coming up on my husband's iphone. Is that because we share an apple id account. How can we have separate apple id's and still share the same music library.

    my ipad imessages are coming up on my husband's iphone. Is that because we share an apple id account. How can we have separate apple id's and still share the same music library.

    The biggest problem I have is with cross texting. My friends send my a imessage on ipad to ipad and it comes up as message on my husband's phone as well as my ipad?
    My friends definitely do not want my husband seeing their texts. (and I dont really need him to see my responses either)
    Also, apple id is based on my email account, how do I create a new apple id without setting up a new email account?

  • I all of a sudden can't view my email with yahoo and my work email

    Hello,
    I have upgraded to Maverick and now I can't view my emails with yahoo and my work's email.
    Is there an easy fix for this problem?
    Thanks,
    Helen

    Hello,
    I have upgraded to Maverick and now I can't view my emails with yahoo and my work's email.
    Is there an easy fix for this problem?
    Thanks,
    Helen

  • Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    maybe there are dirt, sand and lint in the speaker output grill ?

Maybe you are looking for