Can a US airport be used in Spain

If i purchase an airpot express or extreme in the US can i use it in Spain without causing an international incident.
Thanks

The AirPort routers will operate on 100-240 Volts and 50-60 Hz, so they will work just about anywhere in the world if you have the right AC adapter.
In other words, a voltage converter is not needed if you have the right wall plug adapter.
You might also be able to to purchase a common "figure 8" power cord that would work with the AirPorts.
There are some differences in wireless channels between the U.S. and Europe in general:
The U.S. uses channels 1-11 for 2.4 GHz while Europe uses 1-13. I doubt that you would ever need to broadcast using channel 12 or 13, so that should not be an issue.
The U.S. uses channels 36, 40, 44, 48, 149, 153, 157, and 161 for 5 GHz. Most European countries use 36, 40, 44 and 48 but not the higher channels.....which are under study.
So, to be "legal" you would want to set your AirPort router on 5 GHZ to use one of the lower numbered channels. I doubt that you would get caught if you used the higher channels, but someone with a European Mac would not be able to receive the higher signals since their Mac would be setup for European settings.
Apple "regionlizes" their products, so while Limnos mentions that you "should" be able to change the settings to match the country that you might be visiting, that is not correct.
Apple does not allow you do this with any type of user adjustable settings. Even if you could change the country setting on your AirPort to Spain, it would not change the wireless settings.
The bottom line.....if you plan to use the AirPort for your personal use, you will not notice any difference from what you have now, assuming that you have the right AC wall plug adapter, or you substitute a new power cord.

Similar Messages

Can the new airport be used as a stand alone to the printer for the iPad

Can the new airport express be used with a network printer as a stand alone with just a iPhone and a iPad, no computer to set it up with?
It has Internet access.

You're referring to Target Display Mode Mid 2011 iMacs this letter will explain how it works or in your case will not work () with your mid 2010 MBP. Sorry to be the bearer of bad news.

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

How can I see Airport is used?

I have a cable ethernet connection and a wireless Airport connection for internet. How can I see which connection Safari is using?

Your iMac will attempt to make a network connection based on the order of network connectors listed in System Preferences > Network.
For example, if AirPort is listed at the top, and Ethernet second, your iMac will create a connection by wireless. If that fails, it would try Ethernet next. It will NOT use both connections simultaneously to increase the connections' overall bandwidth.

How can I set up an older airport express using the newest airport utilities?

How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestions

How can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

I have the airport extreme. I can print from my mac using wireless. I set up the bonjour with my mac laptop. It see's the printer but when I try to print from my laptop it tells me the printer is offline. Printer is on and prints from mac. Help!

I can not print from my mac laptop. I have the airport extreme for wireless. I can print from my Mac using wireless but not my laptop. Laptop see the printer but says its offline when I attempt to print. Help!

Try this:
http://discussions.apple.com/message.jspa?messageID=8096765#8096765
Good luck!

Can't copy large files to AirPort Disk Using Windows 7

Hi Everyone,
I'm positng because I'm unable to copy large files to an AirPort Disk using Windows 7. I have the following setup.
AirPort Extreme:
- Firmware version: 7.6.1
- Airport disks secured by password
- No guest access allowed
- Airport Disk Preferences:
- Automatically discover airport disks is enabled
- Show Airport Disks in the system tray is enabled
External Drive:
- Western Digital 500 GB MyBook External Drive connected to Airport Extreme thru USB
- FAT32 Formated
Computers:
- 2 Toshiba Proteges, Both with 4GB RAM
- Both have Windows 7 Home Premium with Service Pack 1, 64-bit version
- (Sorry we have no MacBooks at home, just iPhones and iPods!)
Airport Utility:
- Version 5.6.1
Airport Disk Preferences Utility:
- Version 1.5.5.3
A week ago, I was able to copy over large files (videos <4GB in size) to the drive. Now, when I try to copy over these large files to the drive, the copy dialog box hangs. I receive a message stating that Windows is calculating the size, but then it doesn't copy over. Windows then gives me a message that it is unable to copy to the drive. When I test the drive connection by copying a small text file over, it copies over quickly and seamlessly. This problem occurs on both computers.
I am able to do the following with the drive connection:
- Read files
- Change file names
- Copy files from the drive to my computer
- See the contents of drive
I've tried all the combinations of the following with no success:
- Turning off Windows Search
- Downgrading the firmware
- Reconfiguring wireless adapter
- Rebooting computer
- Rebooting wireless router
- Rebooting external drive
The drive seems to be working fine except for when I want to copy <2GB files over to the drive. Does anyone have a solution that seems to work?
Thanks!

I'm happy to report that, after reformatting the drive to HFS+ (aka Mac OS Extended), there are no problems writing/copying large or small files to the AirDisk drive. I'm also happy to report that I am copying to the drive at a rate of roughly 4MB/s.
As I mentioned earlier, the only catch is that I am unable to plug the external drive directly into a Windows computer via the USB port as Windows is unable to read HFS+ formatted drives. (I can, however, plug the drive into a Mac computer as they can read HFS+ formatted drives. The only problem is that I don't own any Macs at this time! LOL!)
You're probably wondering how I formatted the external drive to HFS+ since I don't own any Macs. (Windows only allows you to format drives in exFAT, FAT, NTFS and the like.) That is a good question. Basically, I downloaded an open source formatting tool called, Gparted, which allows you to format any USB drive to any major file format system. Since Gparted is an open source tool, it is a little cumbersome to use. Once you figure out how to use it, it is a cinch to format the drive to HFS+. (Of course, an easier method would be to borrow a friend's mac, plug the drive into their mac, and format it to HFS+ using their mac.)
For a step-by-step guide on how to solve this problem, see the steps below:
1) Backup all data from external drive
    a) Fortunately, I have a 1TB ultraportable USB drive which has enough space to backup all data on the drive
2) Format the external drive to HFS+ using one of the methods below
    a) Plug it into a Mac and format it
     b) Use Gparted (free) to format it
3) Plug the drive back into the Airport Extreme
4) Start copying files over to your networked drive!
I hope this helps you! Cheers!

Can an Ipad 2 3G bought in US be used in Spain with a local phone company contract or is it locked to ATT or Verizon? I am buying it here in the US but will be using it primarily in Spain. Thanks

Can an Ipad 2 3G bought in US be used in Spain with a local phone company contract or is it locked to ATT or Verizon? I am buying it here in the US but will be using it primarily in Spain. Thanks

ATT should be okay, but not Verizon. Look at the right panel, under "More like this", other users have asked similar questions.

Can I use two airports to use internet and listen to itunes in stereo? simultaneously?

Can I use two airports to use internet and listen to itunes in stereo? I just bought a second airport so I could listen to itunes & Pandora on my stereo. My problem is that I haven't been able to connect to both airports at once. I want to listen to the stereo (one airport) while using internet which is connected to a separate airport. Unfortunately, the stereo and ethernet cables are not close by which is why I bought the second airport.

You can run both simultaneously. You just need to reconfigure the base station that will be used for streaming as a wireless client.
I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar.
Be sure to first switch the wireless network to the AirPort that will be used for streaming. Note: You will temporarily lose the Internet connection from your "main" AirPort. Then, run the AirPort Utility. The Utility should now find the streaming AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing "main" AirPort's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AXn > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

How to make sure I'm the only one who can manage my airport base station using airport utility?

I know we have to use the Airport Utility application to manage the Airport base station in order to create a new network, creating the SSID and chosing the encryption mode and setting the password but how I could be sure I'm the only one who have access to those settings? A user of my network can install the Airport Utility application and change those settings. With other routers like D-Link, to have access to the settings you need to know the admin password to modify the settings. I can't figure out how we can do this with Airport Extreme base station. It's maybe obvious but I'm in the cloud for the moment.

You can set a base station administrator password in order to limit who can administer the base station. With AirPort Utility v6.x, you can set this password on the Base Station tab.

Can airport be used as a modem

can airport be used as a modem to hook up internet service from time warner

No, it is a router and wireless device.. there is no modem.. you must use one supplied by your ISP or one on their compatiblity lists.

Can't connect to Airport Express using Linksys WRE54g?

I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
Here's my setup.
I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
Now I bring macbook to living room. AE1 works!
What I intend to setup is,
1. WAG200G, macbook and external HDD in my studies.
2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
3. Control the playlist using iPhone Remote and listen music in living room.
Question:
1. Did iTunes connect directly to Airport Express without going thru network router?
2. How should I setup Airport Express in this case?
Appreciate anyone who can help me on this. Thank you.

pss.
actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

Can I add a second Airport Express using an Ethernet cable to extend my network if the first AX is wirelessly connected to an Xtreme?

Hi, I run a small motel and I am trying to extend the wireless network from the office to the rooms in the next building.
I have an AirPort Xtreme connected to my router with an ethernet cable and it works fine. I have then connected an AirPort Express to this in the next bulding wirelessly (as i cant run an ethernet cable outside) which extends the network over all but the last 2 rooms in the next building. There are bick walls so it sruggles over the distance. I realise I cant connect another airport express wirelessly to extend the network further but can I connect another Airport Express using and ethernet cable to the exisiting Aiport Express to extend the network that extra distance?

You can do this, but as you might imagine, that is going to place even more of a load on the weakest link....the wireless "hop"......between your AirPort Extreme and the current AirPort Express.
So, things will slow down even more. Whether or not that will be acceptable to your guests is open to question. Light browsing and email should be OK. Someone trying to download a large file is going to be waiting longer than they might consider normal.
Things like this, you simply cannot predict in advance. Might be a good idea to understand the store's return policy if the new Express puts more of load on the network than is expected.

Can a US airport be used in Spain

Similar Messages

Maybe you are looking for