Can a user to create a condition or exception in Bex Analyser ?

Can a user to create a condition or exception in Bex Analyser in a similar way that a user can create a condition or exception in the Web?
I am assuming there is not and they can only be displayed but I wanted to check. Can anyone confirm whether there is any way to do this or if SAP are likely to make this possible in the furture?

Yes they can.
Please take a look at the link below.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/5f6039ae48e623e10000000a11402f/frameset.htm

Similar Messages

Want to know the user who created conditin record for Batchaes. T-Code VCH1

Can any one help me to find out the user who created the condition record for batches T-Code VCH1

I got the answer, we need to go to strategy record slect it and next select selection criteria and environment--->change document.
It gives u the change log information for the condition record.

How many conditions and exceptions can be defined in a query?

hi,
Can any one tell
How many conditions and exceptions can be defined in a query?
i.e
How many condtion can be defineon an keyf igure with respective to charecteristics?
Because if we define more conditions on one keyfigure with respective to different chars,there might be some overlap among the conditons andconditions might not work.
Am i coorect?
Similary for the exceptions also.
Simply to be asked aswhat are the limitations of conditons and exceptions?
Regards
Naresh

Hi Naresh,
In Query we can no limit for creating Condition & Exception
but Creating Condition : You can create two condition in a single condition it's work 'OR' Condition.
You can build different condition it will work "AND' Condition.
Thanks & Regards,
Venkat.

How can I create a conditional break in webi ?

Hello Mister and Misses
Can somebody explain me how i can create a conditional break , because i want to limit the number of lines to 9 l ines in a bloc
each 9 lines I want to create a break
Thank you
example :
1   toto
2   titi
3   taa
4   tutu
5   papa
6   popo
7   tata
8   momo
9   mimi
(break)
10 mumu
17 maxe
18 fax
(break)
19..
My first column is not a dimension so, i can't manage to make a break
How is it possible to tranform a measure to a dimension in order to make a break on each 9 lines
thank you

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Why is a new user account created every time I upload files from my old PC. Can't you just use the same user account all the time?

I'm a new Mac user and am finding my way slowly around it. One question: why is a new user account created every time I upload files from my old PC?

Because you're using the Migration Assistant, and it can't migrate data to an existing user account. Transfer everything at once or use a different method.
(111200)

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

How can we restrict the other user to add their user id's to the user group created in SQ03?

Hello All,
How can we restrict the other user to add their user id's to the user group created in SQ03?
When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
http://scn.sap.com/thread/3536135

Can another user create a form on our account?

Can another user create a form on our account without us giving them our password?

Yes, any user can create the form in Formscentral, provided you don't share the password.
Regards,
Anoop

Cannot find a field for creating a condition table

Hi all,
I m trying to create a shipment scenarios which involves shipment cost based on prices,boxes,material....etc. to start with i tried to create a condition table, here the key combination needs to have the filed 'boxes' in it. I am not able to find it even in the master table. Is there any other place whr i can find it or how can i add this into the list?(master table)
any input is highly appreciated.
regards/aryan.

Hi
Try to ad the filed from the field catalog ,In case the required combination field is not there u can add the field through the following process to filed catalog and create the condition table.
It is most common that one or other time we need to use this function while configuring multi tasking & complex Pricing Architecture.
Here Aim giving a simple guide to add fields to the Pricing Field Catalogues:
For example you want to use field PSTYV ('Sales document item category') that is included in structure KOMP ('Pricing Communication Item') as a key for a condition table.
When you create a condition table (Transaction V/03), however, the system does not propose the field in the field catalog.
Condition access, field catalog, allowed fields, KOMG, KOMK, KOMP, KOMPAZ, KOMKAZ, PSTYV are the other terms which we need to know about, to add Fields.
Reason and Prerequisites
For technical reasons, field PSTYV was included in structure KOMP, however, not in structure KOMG ('Allowed Fields for Condition Structures').
Proceed as follows:
1. Call up the ABAP Dictionary (Transaction SE11) and create data type ZZPSTYV. Choose PSTYV as a domain.As a short text, you can use, for example, 'ZZ - sales document item category' and as a field label, you can use the field labels of PSTYV.Save, check and activate your entries.
2. Call up structure KOMPAZ in the ABAP Dictionary (Transaction SE11) in the change mode and make the following entry:
Component Component type
ZZPSTYV ZZPSTYV
Save, check and activate the change you made.
3. Note:Because of the change in structure KOMPAZ, field ZZPSTYV is now known in structures KOMG and KOMP because structure KOMPAZ is included in both structures.
4. Call up Transaction SPRO. Navigate to 'Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control' and execute 'Define Condition Tables'.
Choose 'Conditions: Allowed fields' and include ZZPSTYV as a new entry.
5. Note:Now you can use field ZZPSTYV as a key field when you create a condition table Axxx.
6. Supply the new field you defined by including the following source code line in USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-PSTYV TO TKOMP-ZZPSTYV.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Consider that you can also use this note as a help if you want to use other customer-specific fields as key fields in a condition table.
For header fields, use structure KOMKAZ instead of structure KOMPAZ and USEREXIT_PRICING_PREPARE_TKOMK instead of USEREXIT_PRICING_PREPARE_TKOMP.
For more information, see Transaction SPRO via the path 'Sales and Distribution -> System Modifications -> Create New Fields (Using Condition Technique) -> New Fields for Pricing' and OSS Note 21040.

Restricting User from creating new records using when-validate-record

Hi,
I have a requirement for which I have to restrict he user from creating a record in the Supplier Master form if the suppliier type is 'Affiliate Supplier'.
I have done the following setups
Seq 10
Description Restricting user from creating Affiliate records
Level Function
Enabled Yes
Condition:
Trigger Event WHEN-VALIDATE-RECORD
Trigger object VNDR
Condition "${item.VNDR.VENDOR_TYPE_DISP_MIR.value} is NOT NULL
and
${item.VNDR.VENDOR_TYPE_DISP_MIR.value} LIKE 'Affiliate%'
Processing Mode BOTH
Context
Level User
Value User Name
Action Sequence 1
Type Message
Action Description Saving Affiliate record
Language ALL
Message Type Show
Message Text You Cannot Create Affiliate records Here
Action Sequence 2
Type Builtin
Action Description Stop Proceesing
Language ALL
Action Enabled Yes
Builtin Type RAISE FORM_TRIGGER_FAILURE;
This is working good on one instance but when I moved it to another instance
when I query the form and try to navigate to the bank accounts tab of the form which is based on a differnt block i.e VNDR_USES block, the when-validate-record trigger fires there also and stops the processing.
Any suggestions on this would be higly appriciated.
Thanks in Advance.

Hi Srini,
Yes, it does work...but in a Form Session if i Create more then one Item, in some cases it fires for the first records and not sleeps for the second.
Sometimes it doesn't give any response.
Appreciated if you divert to the link to check the Pacthes for 11.5.10 on Form Personalization.
Please share any ideas/example if yiou have to achieve the below requirement.
Requirement:
Once New record is created , a Custom Procedure should be invoked.
with out closing Form i am able to create n number of Items, so for every Item it should invoke Custom PLSQL Code on Save.
Let me know if i can achieve the same in Custom.pll .....as i can use either of Options.(Form Personalization/Custom.pll)
Thanks & regards,
Edited by: user632004 on Mar 16, 2010 7:50 PM
Edited by: user632004 on Mar 16, 2010 8:09 PM

Field avaialble in field catalog but not when I try to create the condition

Hi,
I wanted to add a new table to a delivery output. I need the fields delivery type/ship point and destination country. I could see that destination country (LAND1) is not available in the field catalog. I added it from the list of available fields (in KOMKBV2) and can see it in the field catalog but not when I try to create the condition table. What else do I need to get this field ?
Regards,
Hari.

Also add your new field to structure KOMBZ
If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
- header data in INCLUDE KOMKAZ in KOMK
- item data in INCLUDE KOMPAZ in KOMP
When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
- USEREXIT_PRICING_PREPARE_TKOMK (header fields)
- USEREXIT_PRICING_PREPARE_TKOMP (item fields)

Can´t deliver by Email on conditional request on Recipients

Guys: Hi, let me ask you if anyone know why i Can´t deliver by Email on conditional request on Recipients. I have a simple report with year, month, date and email fileds and create ibot with this report and the next parameters:
GENERAL:
Priority HIGH
Data Visibility Not Personalized
Run As ADMINISTRATOR
RECIPIENTS:
Determine recipients from conditional request EMAIL
DESTINATIONS:
Specific Devices EMAIL
This is the error message:
+++ ThreadID: 2510 : 2009-05-11 17:17:56.625
iBotID: /users/administrator/_ibots/PRUEBA INTELLEGO
No devices for user: [email protected]
+++ ThreadID: 2510 : 2009-05-11 17:17:56.625
iBotID: /users/administrator/_ibots/PRUEBA INTELLEGO
No devices for user: [email protected]
PD: Let me tell you that if i send with "Me" option check on Recipient, i don´t have any problem.

lets say you want to send accounts associated to sales team then load sales team user id in the OLAP table and pull that column in the report and in recipients tab under determine recipients from conditional request select the user id column. Once you save the ibot it will pick the user email id from SA system subject area automatically. I have done this in my project and its working fine.
Thanks,
Sachin

Can a user be part of two Experience Definitions?

Hi, I have two questions:
1. Is experience defintion the only way of defining a different look & feel including navigation for a set of users?
2. Can a user be part of two experience definitions? If yes, which experience definition he will see? Can the user have option to switch between two experience definitions that he is part of?
thanks
sampath

Hello Sampath,
1. No
You can use, for example, the same Exp Def but different communities, so look and feel will be still different.
Exp Def is a kind of TOP LEVEL portal object where you can define differences for look and feel. For example, this is the place where you can define different NAVIGATION or STYLES.
But it doesn't mean that Exp Def is the only place to do this. You still may want to have the same style but different portlets on default community page for different group of user. Even for navigation you can not say that Exp Def is the only place to have different navigations. For example, you can use the same Exp definition and turn off portal navigation, then you can use canvas portlet as navigation for different communities. So you may have 2 different navigations for the same Exp Def. At the same time you can still choose different way and create 2 Exp Def and use 2 different navigation. What I want to say is that you can reach the same results applying different ways.
2. Can a user be part of two experience definitions?.
Yes.
If yes, which experience definition he will see?Depends of the Exp Def rules. The first rule that validate to "true" will be applied. For example, let's say you have user that belong to group "A" and you have 2 Exp Def rules both setup as rule condition for group A:
1) Rule 1 ( user belong to group A ) --> Exp Def 1
2) Rule 2 ( user belong to group A ) --> Exp Def 2
So if this is the only condition for both rules then Rule 1 will be validate to true first, so user will be redirected to Exp Def 1 that is associated with Rule 1. Now if you change sequence of these rules to:
1) Rule 2 ( user belong to group A ) --> Exp Def 2
2) Rule 1 ( user belong to group A ) --> Exp Def 1
user will be redirected to Exp Def 2.
Of course, in real life you are going to have more conditions for rules, this is just simple example.
Dmitry
Edited by Bryazgin at 02/05/2008 7:01 AM

Allow users to create reports based on their own selection of fields

Is there a way to allow users to create reports based on their own selection of fields?
And if there is a way, then how?
In access we retrieve all demographic info on one screen and on another screen user can be able to choose specific fields from a list box to import data into file.

Hi,
This can be handled in various ways - but the principles are the same.
You need to apply conditional displays to all of the columns that your user can select and base the display of a column on the value of a field on the page.
You can have a series of Yes/No options - one for each field and base the display on the corresponding field being Yes. Or you can use checkboxes.
However, if you wish to use a multiselect list (which is probably easier as you can dynamically generate the list of field names), you will need to have hidden fields that will store either Y/N or 1/0 (I use ones/zeros) and have the conditional displays watch these fields instead. Populating these hidden fields is a bit more tricky than just having fields on the page that the user can control, but is doable:
1 - Create one hidden field for each field in the report that you want to show/hide. Put these fields in the same region as the select list in a region above the report
2 - Set conditional display values to "Value of Item in Expression 1 = Expression 2" and use the appropriate hidden field for Expression 1 and in Expression 2 enter in 1
3 - Create a page process that runs on submit, and create PL/SQL code something like:
DECLARE
lFields HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
vField VARCHAR2(1000);
BEGIN
:P31_SHOW_EMPNO := 0;
:P31_SHOW_ENAME := 0;
:P31_SHOW_JOB := 0;
:P31_SHOW_MGR := 0;
:P31_SHOW_HIREDATE := 0;
:P31_SHOW_SAL := 0;
:P31_SHOW_COMM := 0;
:P31_SHOW_DEPTNO := 0;
lFields := HTMLDB_UTIL.STRING_TO_TABLE(:P31_FIELDS);
FOR i IN lFields.FIRST..lFields.LAST LOOP
vField := lFields(i);
IF vField = 'EMPNO' THEN
:P31_SHOW_EMPNO := 1;
ELSIF vField = 'ENAME' THEN
:P31_SHOW_ENAME := 1;
ELSIF vField = 'JOB' THEN
:P31_SHOW_JOB := 1;
ELSIF vField = 'MGR' THEN
:P31_SHOW_MGR := 1;
ELSIF vField = 'HIREDATE' THEN
:P31_SHOW_HIREDATE := 1;
ELSIF vField = 'SAL' THEN
:P31_SHOW_SAL := 1;
ELSIF vField = 'COMM' THEN
:P31_SHOW_COMM := 1;
ELSIF vField = 'DEPTNO' THEN
:P31_SHOW_DEPTNO := 1;
END IF;
END LOOP;
END;
4 - Finally, add a button that generates the report - this just needs to submit the page and branch back to the same page
I've used the standard EMP table for this example and my hidden fields are P31_SHOW_fieldname. The code resets the hidden fields to 0, checks if the user has selected the field from the list (P31_FIELDS) and changes the hidden fields value to 1 for all those selected. When the page is re-rendered, the report hides the columns where the hidden field value is 0 and displays those where it is 1. The export option will then only export those fields that are displayed.
You can see an example of this here:
http://htmldb.oracle.com/pls/otn/f?p=33642:31
Regards
Andy

Trying to create a condition on a BW Universe

Hi experts,
I'm trying to create a condition on a BW-Query Universe just like below:
<EXPRESSION> IIF([0HALFYEAR1].[LEVEL01].[[20HALFYEAR1]].[Value] = 1 , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7] , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7]) </EXPRESSION>
i've searched a lot till get this code, but it still giving me an error when I try to execute.
Does anyone can please help me?
Thanks,
Gui Boscolo from BRZ.

Hi David,
Thanks for your answer, I've made the ajustments you have mention, but I'm still getting erros when i'm running a report with an object that contain this 'code':
<EXPRESSION> IIF(@Select(SemestreL01 Semestre Chave) = "1" , @Select(Variáveis de CálculoMontante Projetado Sem1) - @Select(ÍndicesSaldo Aplicado) , @Select(Variáveis de CálculoMontante Projetado Sem2) - @Select(ÍndicesSaldo Aplicado)) </EXPRESSION>
As you notice, now I'm using the @select function, the quotes are in the value of HALFYEAR01 ((@Select(SemestreL01 Semestre Chave) = "1") and removing the IFF function, the expression works.
The problem, is We need to have this IFF function at BO, because we're trying to complement a expression on BW that cannot be changed!! That's my problem at all!
Thanks again!

Can a user to create a condition or exception in Bex Analyser ?

Similar Messages

Maybe you are looking for