Can A VC3 Be Created And Produced With Audio Only?
Hi everyone! I was wondering if you can create VC3 shows without using a video camera and use just an audio headset for the audio
and then use powerpoint slides in trays as the rendered finished show.
If so, how is it done? Thanks.
I too, would like to know this. .
I connect a mic, test the audio successfully, make certain it is not passing through to
speakers, yet VC3 still never registers it when I go to record the show; the background music is there, ofc, but all the rest is silence.
Any help would be strongly appreciated!
Similar Messages
-
How can we get Dynamic columns and data with RTF Templates in BI Publisher
How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991 224 1265-D30 USES fever TX
493991 224 1265-D30 HOW TO USE one tablet daily TX
493991 224 1265-D30 SIDE EFFECTS XYZ TX
493991 224 1265-D30 DRUG INTERACTION ABC TX
493991 224 1265-D30 OVERDOSE Go and see doctor TX
493991 224 1265-D30 NOTES Take after meal TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggestif you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ? -
How create and work with Z output to meet the client requirment?
hi gurus,
I am SD functional consultant and need ur help
Please explain me how create and work with Z output .
How we arrange and change the fields in header and footer
where and how we do changes in Layouts setting and SAP scripts to meet the user requirments.
pls forward functional or Tech spec of Z output
points will be rewarded
thanx & regards
shabnumHi shabnum ,
I hope you can do it.
Goto SE71, enter form name--> click change
1) click in page window command button, Identify the header and footer window
2) single click on Header window and click change button(pencil symbol)
3) identify the fields and change order of the fields
I hope this will help to solve your issue
Regards,
SaiRam -
Can I use Adobe Premiere and Photoshop (with cloud license) on more than one computer? WHen on the oroad I would like to use it n my laptop, while I installed on the desktop.
Hi Kasiah,
As per the EULA accepted while you launch Adobe applications you can download & install on 2 systems but can use on one at the same time.
Source:http://www.adobe.com/in/products/creativecloud/faq.html
Let me know if you have any questions on this.
Cheers~!
-Mandhir -
How create and work with Z output to meet user req
hi gurus,
I am SD functional consultant and need ur help
Please explain me how create and work with Z output .
How we arrange and change the fields in header and footer
where and how we do changes in Layouts setting and SAP scripts to meet the user requirments.
pls forward functional or Tech spec of Z output
points will be rewarded
thanx & regards
shabnumHi
From SPRO do the all steps.
Goto SD-> BASIC functions->Output control->Output determination->Output determination by condition technique->Maintain Output determination for sales documents
Here define all like access sequences, Output types, condition tables and assign them to Program and Forms.
From SE71 copy the script to a Zscript and to modify it to suit your requirements and the same Zscript has to be assigned to Output type, Program in NACE transaction.
Reward points if useful
Regards
Anji -
Can i use my mac and pc with a cloud app?
can i use my mac and pc with a cloud app
Yes.
http://www.adobe.com/products/creativecloud/faq.html
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
An ever-expanding membership that provides access to Adobe's latest products, services, features, and workflows as soon as they are available. You no longer have to wait 12, 18, or 24 months for the latest innovations.
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information. -
I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?
I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you. -
Final Cut Pro X version 10.0.5 – How to Create Storyline with audio-only clips. I'm following exercises in Diana Weynand's Pro Training Series, and this function is greyed out. Trying to create crossfade transition. New Compound Clip can be activated however.
Chapter 7. Page 269. Exploring Audio Transitions. Selecting two audio clips, then control-clicking the clips. The dropdown menu to Create Storyline or (Command G) is greyed out. The function no longer seems to be available. I've found other functions that no longer apply with the latest version in relation to the book, and I assume that this is another one. But I'm trying to follow the book the best I can. I know there's a workaround. I can simply select an edit point and add the cross dissolve (Command T), but I wonder if this accomplishes the requested exercise from the book.
-
Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.
Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams -
How can I delete the video and keep the Audio in a few frames using Imovie 11
How can I delete the video and keep the Audio in a few frames using Imovie 11?
I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host> -
How to create a user with read only access for ESB / BPEL Console
I need to create a user with read only access to ESB Console & BPEL Console. I have created a user
(esbreadonly) and assigned ascontrol_monitor role but user is still able to
delete services from ESB systems (such as DefaultSystem). Is there any way to
create a user that has strickly read only access to ESB Console & BPEL
Console
Thanks
Dinesh PatelCheck out this post.. I'm in the process of testing.
http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html -
How to create sharepoint Group with read only permissions using powershell for entire site ?
How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)
Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply. -
have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .
Apple world-wide support numbers are found at: http://support.apple.com/kb/HE57
If this is regarding your information line that says a stolen iPhone, Apple can do nothing to help you. You must track the iPhone yourself using iCloud and must have turned on Settings > iCloud > Find My Phone before it was stolen. If that was not done, there is no way to track the iPhone.
Report the theft to the police and the cell service provider and ask if they can blacklist the iPhone so it cannot be used. Change all passwords associated with acconts on the iPhone. -
how can I find my lost ipad-2 with WIFI only. I have only its serial no. icloud says alway the
device is offlineIt will only show if the device is turned on. And if someone else has it, they can turn that feature off. Your best options are to return to the location where you think you lost it, and see if anyone returned it. Also contact your local law enforcement.
Reporting a lost or stolen product
http://support.apple.com/kb/HT2526
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number -
how can i arrange that movies and picts are stored only once?, i find them in thumbnail, i movie, imovie thumbnails, and some times in cache.mov or as imovie proyects
The movies themselves are stored only once. The other files you're seeing are small ones that are used to reference, display and access the main file. If you check the file sizes, you'll see that only one (the movie file itself) is large.
If you don't want anything saved but the main file, stop using iMovie.
Maybe you are looking for
-
I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house. My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same networ
-
I want all the numbers to be bold in AdvancedDataGrid
I use inline item renders for a data grid for a couple of columns in an AdvancedDataGrid. Theses style the numbers in the cells red if the number is negative However at the last row I have a row which has the total of the above rows and where I want
-
Unable to perform call transfer & call park through SIP Trunk (SKYPE)
The Scenario is: I have set up a SIP trunk to SKYPE and we are able to make outbound call to a number via SIP Trunk. After the call is established, when we tried to make call transfer, the call DROP and the phone at the other end shows error "Temp Fa
-
How can I work with coherence3.6 + pushreplication2.7.1
Hi everybody, I tried to upgrade coherence3.5.3 to 3.6.0, everything works well except pushreplication pattern, the point is NO article & example code show me how to implement the code below: when use Push Replication Pattern 2.5.0, we can register p
-
Performance issue loading 4000 records from XML
Hello, Im' trying to upload in a table with the following sqlstatement records from an XML having content of this type <?xml version="1.0" encoding="UTF-8"?> <custom-objects xmlns="http://www.mysite.com/xml/impex/customobject/2006-10-31"> <custom