Can a wallpaper image be forced to occupy the whol...

I cropped down a photograph in Photoshop that I wanted to use as a wallpaper image on my 6220 classic and saved it so that it was 320 pixels tall by 240 pixels wide - the same resolution as the screen on the phone.
However when I copy it to the phone and set it as the wallpaper image, the phone crops the top & bottom of the image off so that it doesn't show underneath the text at the top & bottom of the screen (the time & date etc at the top, and the button labels at the bottom). The original wallpaper image of the selected "Black" Theme still shows through at the top & bottom of the screen.
Is there any way to force the phone to display the entire 320 x 240 pixels of the wallpaper image rather than it being cropped?
Thanks.
Solved!
Go to Solution.

By the phone itself it cant be done. But you can download/create theme to make it the whole screen by going to theme sites like www.ownskin.com
www.mobile9.com etc etc.
Another application is THEME DIY which can be installed on the phone and it provides lees option than ownskin can do. Honestly speaking the way Theme DIY creates themes I dont like cause AFTER ALL, the inbuilt themes provide much shaprer textures, colour accuracy etc.

Similar Messages

  • Messages Log Window - occupy the whole width of the screen

    I accidentally "unpinned" my Messages Log Window and although I have managed to redock it, how do I get my Messages Log Window to now re-occupy the whole width of the screen and leave the System and Structure Windows only as Windows that do not occupy the whole width of the screen.

    Steven,
    It sounds like you have docked the Log Window on the left-hand side rather than the bottom.
    If you click and drag on the Log Window caption bar so that you are over the background area and then move your mouse towards the very top of the Status Bar you should see the Log Window expand to the full screen width that you want.
    Hope that helps,
    Lisa Sherriff
    JDev QA

  • Safari is occupying the whole page so I cannot see the dock below. How  do I put this right?

    Safari is occupying the whole page so I cannot see the dock below. How  do I put this right?

    Ok.. go to the very top of the Safari window then double click the gray title bar that runs horizontally across the top of the window then click:  View > Exit Full Screen

  • Can I encrypt my individual folders instead of the whole home folder?

    I want to encrypt one specific folder only and not the whole folder especially since we don't really have (and use) multiple user accounts. How can I do that?

    Use Disk Utility to create an encrypted disk image of that folder. Then delete all the files in the original folder. Next, option-drag all the files form the encrypted disk image into the original folder. Store the encrypted disk images somewhere where it won't get deleted and will get backed up. Now, any time you double-click one of those aliases, it will automatically ask you for your password, mount your disk image, and open your encrypted file.

  • Please help, can I restore a Aperture project instead of the whole Library?

    Hi,
    I really need some help, ok so I use Time Machine and backup weekly on my Time Capsule so I know my work is safe. But now here comes the question I just realised I need to restore some pictures but I do not know how to go about it. Do I have to restore the whole Aperture Library which is 40GB, or can I just restore a particular project or even much better just restore a picture?
    Thanks
    Catherine

    catchapman wrote:
    Hi, the one thing I do know is that Aperture keeps everything in the Home Pictures folder, but its all within the Aperture application.
    Those are two different things. It's likely all managed by the Aperture application, but the data won't be inside the app itself.
    But yes, if you can tight-click click on that folder, then +Show Package Contents+ and navigate to individual pictures from the normal Finder, you're not going to be able to restore selected items.
    iPhoto is similar, but has it's own special handling with Time Machine, where you can browse and/or restore individual items from the +iPhoto Library+ package.
    You might find some info in the Aperture forum.
    It's a bit cumbersome, but you might be able to restore the whole thing to an alternate location, then copy what you want from the restored package.

  • Frustrated beyond belief.   Trying to download the new Itunes 11 version so I can sync my phone.   It goes thru the whole process, says I was successful and then I get a message - "Apple Mobile Device Failed to start----retry, and retry, same message.

    On my desk computer, I tried to download the new Itunes 11 version.   I had Itunes 10.  It goes thru the whole process and then says "Apple Mobilve Devide failed to start, Verify you have sufficient privileges to start service.   I hit retry and then I get  Installation successful followed by error 126.   I can not enter Itunes at all now.   If I click on the former icon it says  MSVCR80.dll for error.   I can't even figure out how to ask for support on this website.   I have several devices linked to Itunes and need to sync.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • How can I block a particular program and not the whole channel?

    I want to block a particular program. When I am trying to that, it blocks whole channel. How can I do that?
    Second Q is: can I have two parental control pins to block programs?

    Then there is no point to use it for me. Some channels require parental control for some programs, so this option should be available.Someone can argue that then "why don't you lock whole channel and unlock whenever you want to use it." I want to avoid locking-unlocking by locking specific programs.
    Comcast has this option of locking specific program as well locking channel!

  • Can't get my iPhoto albums to download the whole album.  Only syncing partial albums.  Anyone know a trick to get it all synced?

    Can't get my new iphone 4s to download my iphoto albums.  They are only downloading a few pictures in each.  Anyone know why?  Or how to get the whole file downloaded?

    What exactly is the material you have? What does item properties say about it? If it's too small you'll have to scale it up, but if you scale it up a lot it's going to get soft and pixely.

  • How I can set up text justify or Bold for the "whole column" of a Table

    Hi,
    It takes time to set up a cell of a Table (Front Panel)for Fonts, justify, Type ... imagine I have to set 1000 cells? Is there any better way to set up one shot for "all cells" in a column and for the "whole Table"? Any one can help me speed this up? Thanks.

    Hi Greg,
    On a related note I would like to ask you a question.
    I wrote an app. in 6.0.1 that took advantage of the defer panel updates option (that I learned about from you, thank you). I was very pleased with the effects.
    Since then, I have taked the same piece of code and have started to use it in another app that I am developing now in 6.1. I no longer see any performance differences using the defer scheme like I had seen earlier. Are the charts failing to "honor" the deferments in 6.1?
    Before you mentioned the table thing (above), I was just thinking that the charts have been updated such that the deferment does not make things any more efficient.
    So...
    Are the charts just faster now?
    or
    Are the charts not honoring...?
    or
    Is Ben just confused (it would not be the first time)?
    Ben
    PS On a general note: You are legendary here at Data Science Automation. I have learned alot from your posting. Thank you.
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I save images and text data to the same file?

    I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

    well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
    For more information and some sample VI's and tool kits, you can go to the excel board
    Joe.
    "NOTHING IS EVER EASY"

  • How can I see images from my camera using the HDMI cable? Is there an app to transfer jpgs?

    I want to preview images from my Nikon DSLR on my ipad2. It would also be nice to see the same video when the camera is in live mode. I bought the Apple ipad-to-HDMI connector and an hdmi (camera to connector) cable. Everything hooks up but nothing happens when I take a picture or view a pictures on the camera.
    Do I need an app for this?
    I know there is a USB based camera connection kit too - however I was hoping to have the HDMI also for outputing to a projector

    That cable set up you have is probably not going to work.  The iOS devices seem a little sensitive to having the right connector for the right job.  I have the USB connector (and the HDMI one too) which is in 2 parts: mini USB link and SD. My older Nikon D70s does not use SD cards, so I use the cable. When connected any images on the card (in the camera) are displayed in the built-in Photo app in an Imports album.  Just touch the Import button and all are brought in.  I use RAW and have found that the RAW images are transferred to the computer (MacBook Pro + Aperture) when I get home.  A comparison (I kept the images on the card and imported from that too) shows that the resolution/size is identical.  As an additional note as you mentioned this, video clips work the same.
    With all the connectors, I carry a small bag for the devices I work with.

  • Can't find files when building EXE unless the WHOLE codebase is in an auto-populating folder

    I have a project with FPGA (specifically a couple cRIO targets).
    I have a build spec for a PC target, then a target that's set up for Scan Mode, then a couple targets set up for FPGA mode.
    When I try and build the FPGA or Scan Mode targets, I NEED to have the entire code folder (and sub-folders) in an auto-populating folder.
    What's strange is that I manually added the same folder, and then pulled the Top-level VI out so that it was easier to see within the project.  When I did that, I got errors that files were broken and missing.  I then removed that folder and added the same folder as auto-populating and all is well.
    Yes, I was able to make the build work by including debugging, not removing TypeDefs, etc.  This also cause the build to go from 2MB and 30 secodns build time to 50MB + 10 min build time.
    Why si this?  I would like to remove the files for other targets from the Source of each of the targets.  If I do this, I can't build (these are other top-level VIs that are not appropriate on a per target basis).
    Any ideas?

    Hey Jed,
    It sounds like the problem you are having is coming from a file path issue.  When you manually add folders as "Snapshot" the file paths are set and will generate errors if the files are moved.  The autopopulating folder updates file path locations so you don't have those same issues.  Debug mode allows for the file paths to be reassociated, but at the expense of time, and in some cases resources.  Enabling debugging will cause the compilation to take longer.
    You wrote:
    So what I am trying to say is that ALL I did when I removed the auto-populate was to click "Stop Auto Populate" and moved the Top-level VI up one folder level within the project.  This causes it to fail compile (unless debugging is checked).
    This makes complete sense.  By moving ANY VI in a project and not having the folder set to auto-populate or having debugging enabled will cause an error because that VI that you moved isn't where it is supposed to be.  This is the way that projects and the compilation of programs was designed.
    To avoid this, don't move files around after they have been added to the project unless you have folders set to autopopulate, or have debug mode enabled.  When you start shuffling file paths, associations get broken and compilations will fail.
    Ben N.
    Applications Engineering
    Certified LabVIEW Developer

  • How can you delete part of a message not the whole  conversation?

    How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

    click and hold on the bubble, you will now see "copy/more"   select 'more'
    you can now choose which bubbles to delete by selecting a check mark next to them and then hit trash can

  • How can I sync only checked items and not the whole album?

      I only want say three songs out of an album but it syncs the whole thing.  How do I change that?

    Don't create a playlist for three songs.
    Either uncheck those songs or a much better way is to create a playlist (or a few) of songs you want on the iPod the sync only those playlists.
    To add/delete from the iPod, simply add/delete from those playlists.

  • In Pages, how can I set a background for the whole document?

    I tend to regard Pages as more of a page layout program than a simple word processor, so I use it for stuff containing graphics as well as text. Now I want to put a kind of frame around every page in the document, and I want this frame to be effectively a background for everything else, with it being my responsibility for the remainder of the material to stay in the frame. I can't see any feature that allows this apart from Headers and Footers, and as far as I can see, these are not supposed to occupy the whole page, just the top and bottom.
    Can anyone give a good technique for configuring a background in this way?
    TIA

    This forum has helped me to partially answer my own question, in that I see now that I want to create a template with a section master that contains my graphic. But when I tried to do this, the menus for making a graphic (in my case a grouped item) part of a section master just didn't work. I am trying to follow the Help page "Using Master Objects (Repeated Background Images), but so far I can't get the menus to undim.
    Can anyone help?

Maybe you are looking for