Can a website created in Dreamweaver 5.5 be maintained with Contribute 6.5?
I have a client who I have advised to purchase Contribute to maintain the website I created for her. When I go to Adobe I see version 6.5. Would she be able to use this newer version to make her updates even if i created the website and all its editable regions in Adobe Dreamweaver 5.5?
You will get a better answer if you ask this question in Contribute Forum at this link:
<http://forums.adobe.com/community/contribute?view=discussions>
You need to ask them whether Contribute can interpret HTML and CSS codes correctly and whether editing of these codes is easier to do in Contribute or some other HTML editors.
My personal opinion is that people should use dedicated HTML/CSS editors to edit web pages but my knowledge of contribute is almost ZERO.
I didn't want to touch this question but nobody was answering either so I decided to write something.
Similar Messages
-
Can I use iWeb to make changes to a website created in Dreamweaver?
can I use iWeb to make changes to a website created in Dreamweaver? How would I do this? I didn't create the site and don't know Dreamweaver, but I figure I could learn iWeb quickly.
No, iWeb cannot open or change existing sites no matter what other program created them.
-
What kind of commenting system is best to use with a website created in Dreamweaver?
What kind of commenting system is best to use with a website
created in Dreamweaver? How would you rate Haloscan commenting
service?Hm - there is only one PowerMac G4 without a line-in - it's called "PowerMac G4 (Digital Audio)". Take a look at this document:
http://docs.info.apple.com/article.html?artnum=58418
... it shows the back panels of 3 models, and if yours is the 3rd, that's it.
In this case, you can really only input sounds digitally. The cheapest solution would be to get an iMic USB device (maybe that's what your husband had - look at the pic. Older models were more like silvery), it comes for < 40 $, and you can plug a microphone into it (with the small 1/8" plug). Not super-great sound, but for that mic it should be good enough. -
Website created in Dreamweaver CS4 doesn't look right in CS6
I used to have an old version of Dreamweaver (CS4 I think) and my laptop got taken out by a lightening strike. I have had to purchase Dreamweaver CS6 and I have loaded up my website (files recovered from hard drive) but the pages don't look right - wrong colours, wrong font, text missing, buttons not displayed properly etc. any help gratefully received!
Are you sure site files on your hard drive were not damaged by the electrical surge?
Can you GET replacement files from your remote server?
Nancy O. -
Website created in Dreamweaver not showing up after upload to server
Hi everyone.
I have created a website in Dreamweaver CS4 which views beautifully in test mode, but when I upload it to my server, all I get is an index directory of all the pages!
I've tried renaming my index.html page as index.htm, but nothing changed.
Also, if I try clicking each of the pages separately, they show up without the 35 px padding at top that I specified on all my template pages! On top of that, not all of the links work.
Any suggestions???
B.UPDATE
Hello again.
Okay, I changed all of my html files, uploaded the site and found it was still glitchy. Long story short: I realized that I also saved many image files using some capitals. For example: img_Car.jpg. So now I'm going back and changing everything!
Quick question: I created my pages using sliced Photoshop layers, Save for Web and Devices>Save Html and images. So basically, all of my Dreamweaver pages have loaded the image files using capitals.
Other than going through each template and tweaking the code, is there a faster way that I could update the Dreamweaver pages to recognize that the relabelled images in my root folder?
B. -
MISSING ITEMS ON WEBSITE CREATED BY DREAMWEAVER-8.2?
WEBSITE SELLS NEW EBOOK. WHEN CUSTOMER DECIDES TO BUY HE
FILLS IN NAME/EMAIL. THEN LINK TAKES HIM TO CLICKBANK ORDER FORM
THIS SEQUENCE IS WORKING FINE ON WEB. BUT NOT ON MY COMPUTER? I
CLICK ON IE7 BROWSER--TO GO NAME/EMAIL FORM & FILL IN
BLANKS...LINK TAKES ME TO CLICKBANK ORDER FORM---MESSAGE APPEARS
"THIS PRODUCT IS NO LONGER FOR SALE" ? I HAVE SYNCHRONIZED LOCAL
FILES TO REMOTE FILES. YET IF I CLICK ON LOCAL FILE NO IMAGE
APPEARS ON LEFT SIDE FOR REMOTE...JUST A MESSAGE SAYING
"REDIRECTING--PLEASE WAIT" IT NEVER APPEARS? TOO TECHNICAL FOR
ME??? I ASKED CLICKBANK THEY DON'T KNOW WHERE THE MESSAGE IS COMING
FROM? IF YOU CLICK ON www.affordablehealthinsur.com everything
works...but NOT ON MY COMPUTER WIN XP PRO USING DREAMWEAVER 8.2
UPDATE.
Text PS: If you
click on local file for Step1 page appears without the two fill in
boxes for name and email???Your shift key is stuck - it makes your post very hard to
read. Can you try
again and be a little more descriptive, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bapaw" <[email protected]> wrote in message
news:faiit4$aet$[email protected]..
> WEBSITE SELLS NEW EBOOK. WHEN CUSTOMER DECIDES TO BUY HE
FILLS IN
> NAME/EMAIL.
> THEN LINK TAKES HIM TO CLICKBANK ORDER FORM THIS
SEQUENCE IS WORKING FINE
> ON
> WEB. BUT NOT ON MY COMPUTER? I CLICK ON IE7 BROWSER--TO
GO NAME/EMAIL
> FORM &
> FILL IN BLANKS...LINK TAKES ME TO CLICKBANK ORDER
FORM---MESSAGE APPEARS
> "THIS
> PRODUCT IS NO LONGER FOR SALE" ? I HAVE SYNCHRONIZED
LOCAL FILES TO REMOTE
> FILES. YET IF I CLICK ON LOCAL FILE NO IMAGE APPEARS ON
LEFT SIDE FOR
> REMOTE...JUST A MESSAGE SAYING "REDIRECTING--PLEASE
WAIT" IT NEVER
> APPEARS? TOO
> TECHNICAL FOR ME??? I ASKED CLICKBANK THEY DON'T KNOW
WHERE THE MESSAGE IS
> COMING FROM? IF YOU CLICK ON
www.affordablehealthinsur.com everything
> works...but NOT ON MY COMPUTER WIN XP PRO USING
DREAMWEAVER 8.2 UPDATE.
>
http://www.affordablehealthinsur.com
PS: If you click on local file for
> Step1
> page appears without the two fill in boxes for name and
email???
> -
Why can't I create a package that uses a cursor with a nested record?
I have two examples of a a stored procedure that are almost identical. The first one oracle will not create, the second works fine. The only difference is that the first example uses a nested record, where in the second example, I combined the two records
Anyone know why or want to pehaps what I am doing wrong? - Thanks Tim
Nested Record (which fails):
CREATE OR REPLACE PACKAGE TestPKG AS
TYPE permissions_rec IS RECORD
cPermissionRead DWH_security_objpriv.permission_read_flag%TYPE,
cPermissionWrite DWH_security_objpriv.permission_write_flag%TYPE,
cPermissionVisible DWH_security_objpriv.permission_visible_flag%TYPE,
cPermissionDelete DWH_security_objpriv.permission_delete_flag%TYPE,
cPermissionExecute DWH_security_objpriv.permission_execute_flag%TYPE,
cPermissionGrant DWH_security_objpriv.permission_grant_flag%TYPE
TYPE privilege_rec IS RECORD
cRoleOrUser DWH_security_objpriv.role_user_flag%TYPE,
vcPrivilegeName DWH_security_objpriv.privilege_name%TYPE,
rPermission permissions_rec
TYPE privilege_data IS REF CURSOR RETURN privilege_rec;
UserFlag CONSTANT CHAR(1) := 'U';
PROCEDURE GetUserDefinedPriviligesSP(vcUserName IN VARCHAR2, curNamedPrivilages OUT privilege_data);
END TestPKG;
CREATE OR REPLACE PACKAGE BODY TestPKG IS
PROCEDURE GetUserDefinedPriviligesSP
vcUserName IN VARCHAR2,
curNamedPrivilages OUT privilege_data
AS
BEGIN
OPEN
curNamedPrivilages
FOR SELECT
Security.role_user_flag,
Security.privilege_name,
Security.permission_read_flag,
Security.permission_write_flag,
Security.permission_visible_flag,
Security.permission_delete_flag,
Security.permission_execute_flag,
Security.permission_grant_flag
FROM
Security, Operations
WHERE
Operations.username = vcUserName AND
Security.role_user_id = Operations.userid AND
Security.role_user_flag = UserFlag;
END GetUserDefinedPriviligesSP;
END TestPKG;
Errors
LINE/COL ERROR
15/5 PL/SQL: SQL Statement ignored
18/65530 PLS-00382: expression is of wrong type
Combined Records (which builds):
CREATE OR REPLACE PACKAGE TestPKG AS
TYPE privilege_rec IS RECORD
cRoleOrUser DWH_security_objpriv.role_user_flag%TYPE,
vcPrivilegeName DWH_security_objpriv.privilege_name%TYPE,
cPermissionRead DWH_security_objpriv.permission_read_flag%TYPE,
cPermissionWrite DWH_security_objpriv.permission_write_flag%TYPE,
cPermissionVisible DWH_security_objpriv.permission_visible_flag%TYPE,
cPermissionDelete DWH_security_objpriv.permission_delete_flag%TYPE,
cPermissionExecute DWH_security_objpriv.permission_execute_flag%TYPE,
cPermissionGrant DWH_security_objpriv.permission_grant_flag%TYPE
TYPE privilege_data IS REF CURSOR RETURN privilege_rec;
UserFlag CONSTANT CHAR(1) := 'U';
-- P r o c e d u r e s
PROCEDURE GetUserDefinedPriviligesSP(vcUserName IN VARCHAR2, curNamedPrivilages OUT privilege_data);
END TestPKG;
CREATE OR REPLACE PACKAGE BODY TestPKG IS
PROCEDURE GetUserDefinedPriviligesSP
vcUserName IN VARCHAR2,
curNamedPrivilages OUT privilege_data
AS
BEGIN
OPEN
curNamedPrivilages
FOR SELECT
Security.role_user_flag,
Security.privilege_name,
Security.permission_read_flag,
Security.permission_write_flag,
Security.permission_visible_flag,
Security.permission_delete_flag,
Security.permission_execute_flag,
Security.permission_grant_flag
FROM
Security, Operations
WHERE
Operations.username = vcUserName AND
Security.role_user_id = Operations.userid AND
Security.role_user_flag = UserFlag;
END GetUserDefinedPriviligesSP;
END TestPKG;Perhaps I'm missing something, but I can't for the life of me see the difference between your two package bodies. If the package specification is the same, there must be some difference, but I don't see it. Could you point out the difference?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
I get my USB and my Windows 7.iso but when I open bootcamp the option to create a Windows USB is not clickable. Please help because my Optical Drive doesn't work.
Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush -
Why can't I change a Word file to a PDF file with your $9.99 monthly plan? I have done so before.
Firefox is a good browser, but it comes with its own PDF viewer, which may not display PDF files correctly. See http://forums.adobe.com/thread/1158136
If you want to continue to use Internet Explorer, you may want to lower its security settings; see http://windows.microsoft.com/en-us/Windows7/Change-Internet-Explorer-Security-settings -
Dreamweaver CS3 will it work with Contribute CS4 Mac 2 PC
Hi I asked this same question in the contribute area of the
forum bu then thought t may be best to ask here as I wanted to know
if Contribute CS4 will work with Dreamweaver CS3?
I take it for granted that it will, I have a mac and will
create a site with Dreamweaver CS3 and then have the client who has
a PC to buy Contribute CS4, will this work okay or do I need to
create the site with a PC and with Dreamweaver CS4?I just read on the adobe website that:
"Contribute CS4 works with Adobe Dreamweaver® CS4
templates"
Does that mean it wont work with Dreamweaver CS3 templates? -
Hi,
Im using rightknow iphone4s. which just a 3hrs ago,n i created the new id was successful but still unable to login
in new id so what should i do.
Thank youSettings > iTunes and App Store > Apple ID = Sign Out...
Then Sign In using the preferred Apple ID.
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
Can DWCC use my website files created on dreamweaver 2004?
I have a website I created on dreamweaver 2004. I have changed computers and the disc is obsolete (no way to register it anymore), therefore, I was wondering if I purchased dreamweaver cc, are my old files compatible?
HTML is still HTML and editable in any code editor. But a LOT has changed in web standards since 2004. The code DW MX generated was fine in its day but that was a very long time ago.
You can download a no-risk 30-day trial of DW CC. Keep in mind that this product assumes that you know HTML and CSS code.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O. -
How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
-Mark -
How can I save a website created on iweb, but that I no longer have it saved in my computer, so I can open it in my new computer with iweb
and republish it on another server, since mobile me would be gone on jun 2012.You need the Domain.sites2 file that's located in your Users/Home/Library/Application Support/iWeb folder in order to be able to manage and publish the site from another computer?
Do you have that file? If you do copy it to the same folder on the other computer and you're ready to go.
If not then you'll have to recreate the site from scratch. Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site. 1
OT -
How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.
Ernst ~ Welcome to the Support Communities. See this post:
Editing my iWeb page from another computer
Maybe you are looking for
-
How do I delete apps from the cloud as well as my device (iPhone 4 and iPad 2)
I am using an iPhone 4 and an iPad 2. I want to remove apps from the devices as well as the cloud list. (Not on this i***). Help!
-
I know nothing about javascript and all that ive been using so far has been stuff ive found on here (thank you everyone). Using the action builder seems like its gonna be very tedious to do since i have so many subforms that hide, would it be esier t
-
Problem: Every time the laptop is turned on, this message pops up: The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll Could someone please tell me if they have had the same problem and how th
-
Hi, In this msdn doc https://msdn.microsoft.com/en-us/library/jj863241%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396 The "Connector for SAP HCM " and "Connector for Web Services" links have the same url. Is these an error or is it really the same "Co
-
Upgraded to Windows 7 need help
Hello All. I'm a newbie as far as understanding the wireless connection world. Anywho, I had to upgrade my PC tower and I went from windows XP to Windows 7. I have a WRT54G router and a WUSB54GS network adapter. WIN7 automatically downloaded the nee