Can a Windows 2003 server see a Netware 6.5 server w/ CIFS loaded?

Apparently the answer, at least w/ the W2k3 server as configured out of the
box, is no. What, if anything, must I do in order for the Windows server to
see the Netware servers? I would like to avoid installing a Novell client
on the Windows server just because it will add a layer of complexity I'd
like to avoid, but if that's the only way, please let me know.
TIA.
-S-

"Brad Doster" <[email protected]> wrote in message
news:[email protected]..
> In article <kn8Gf.6885$[email protected]>, Steve
> Freides
> wrote:
>> Apparently the answer, at least w/ the W2k3 server as configured out
>> of the
>> box, is no. What, if anything, must I do in order for the Windows
>> server to
>> see the Netware servers?
>>
> See
> http://support.novell.com/cgi-bin/se...i?10084607.htm
That TID seems to address login failures, but I don't even see the
Netware boxes at all. A good starting point would be having them show
up in Explorer.
TIA.
-S-

Similar Messages

IVR Windows 2003 part number

Does anybody know the part number for Cisco Unified Communications Operating System to support IP-IVR 7?
This is an OEM Windows 2003 build for an HP DL380 G6 server, so needs to be version 1.5 of the operating system release. I'm struggling to find the exact part number that I should order to get a bootable 1.5 OS ready for an IP-IVR (UCCX) build
Thanks
Jed

The Cisco OS 2003 part number is 2003.1.2 or 2003.1.1; however, what version of CRS are you looking for? Please remember that software should be requested through PUT; go ahead and enter your Software contract under PUT, it should be listed there:
PUT tool (http://tools.cisco.com/gct/Upgrade/jsp/index.jsp)
Hope it helps!!!

P6N SLI Platinum - How to convert to RAID with existing non-RAID Windows 2003?

I built up my Windows 2003 machine on a single SATA drive and didn't load the RAID driver thinking I could convert later. Now I want to RAID 1 a second Raptor but I can't seem to get it to work.
I've loaded the RAID drivers in the OS, enabled the RAID functionality in the BIOS, and set the existing drive to be a single striped drive. I found some references that said that might work. Once you get a single striped RAID 0 drive you are supposed to be able to convert from RAID 0 to RAID 1 when you add a second drive.
But I don't get that far. It won't boot when I change the BIOS from non-RAID to RAID. The OS flashes a quick blue screen message about no boot device or driver being found and keeps rebooting. I'm able to get into the RAID section of the boot process to do the configuration from a single standard drive to a single striped drive, I just can't boot into the OS after that.
Anyone know a way to do this?

Quote from: Maesus on 23-April-07, 22:03:06
what is your 1st HDD is it the same raptor as your 2nd one?
Also, try this tips : http://support.microsoft.com/kb/314082/en-us
Yes, the Raptors are exactly the same. I had them in a hardware RAID configuration on my previous motherboard.
My OS is Win2003 so I'm not sure the XP article will apply, but thanks for the reference. It may lead me in the right direction.

Can't install ITunes on Windows 2003 server (WHS box)

Hi,
I can't install the latest ITunes because it incorrectly mistakes my Windows 2003 server as Windows XP. So after search I find that I can change the MSI files as according to this thread: http://discussions.apple.com/thread.jspa?threadID=2154140.
This seems to work for all MSI file sin the ITunes etup exe except for this: AppleMobileDeviceSupport.msi. If I change the MSI LaunchConditions it gives my error 2229 no matter what.
So I'm stuck. Should I call Apple next?

I can't help you with the error you get, but just to clarify while iTunes isn't "officially" supported for use on Server 2003, it does work. Sort of. iTunes 8 could be installed by editing the MSI, iTunes 9 however while this method is still required you'll run into a problem with iPodService.exe crashing, and iTunes refuses to finish the install until that service is up and running.
There are a few topics on here that detail what you can do to get around this problem. I believe currently the only tried and tested method is to use the iPodService.exe from iTunes 8, doing a swap trick when the iTunes 9 service crash occurs so that you can at least get the application to install.
I can't be bothered to go to the trouble though. I'm interested in seeing if Apple will silently stop with the BS and just fix the installer's version mismatch errors (easily done), and fix iPodService.exe. The reason why the service crashes, according to what I've read, is because it seemingly misidentifies Server 2003 and similar OS's as Vista or Windows 7, and then begins calling functions for those OSs from ntdll.dll - which causes the crash.
As for your error, presumably that is with Orca. All I could find relating to the errors is something about transforming the MSI and language translations. It could also be because of an older version of Orca. Perhaps try and re-download iTunes, and extract the MSI packages again. But you should only need to edit the LaunchCondition for AppleMobileDevice.msi - and you don't need to delete the table either, you can simply change the number in NTVersion from 501 to 502, save the package and it'll all work. It did for me when I first tried it anyway.

Trex can't be updated to higher levels on windows 2003 server 64 bit

Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PM

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

Where can I get Oracle database server 9i for windows 2003

Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
Laura

Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

Mac can't search on a Windows 2003 server

We are using a Mac G5 running OSX (10.3.9) and are not able to search for files on our Windows 2003 server. We also can't index the server from this Mac.
The Macs and the Window server are fully up to date.
We are using AFP for the network connection. (We need to use AFP to maintain the Apple File Links.)
Our Windows PC can search files on the server with no problems.
Please help! Any advice is appreciated!!

Same here. I'm seeing the same error.
When I look at my Windows share, I see that Pages is trying to create a folder with several subfolders: Data and Metadata, plus index.zip, preview-micro.jpg, preview-web.jpg, and preview.jpg files.
I don't think this is a Mavericks issue, although I upgraded to Mavericks and Pages 5.0 at the same time. I still have the older version of Pages. It works just fine.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Can't connect my Mac to my Windows 2003 server shares via SMB

Hello all
So my problem is I have my Powerbook running 10.4.7 with all the latest security updates and I cannot connect it to any shares on my Windows 2003 domain controller. Everything was working fine and I could connect to the server with no problem till about a month ago. However, I can still connect to the Windows 2000 domain controller with no problem. The error I get when trying to connect is "Could not connect to the server because the name or password is not correct". I did try clearing out my keychain, making sure all of the authentication policies on the server are correct (disabling the digitally sign commucations always policy), and I even went as far as editing a .conf file in /etc/ folder that allows for passwords to be sent without any encryption (I forget exactly what I changed but I can post that later when I get home from work) and none of this has worked. I unfortunately don't have another mac to test out connecting to the Windows 2003 server. Does anyone have any ideas of what I could do to try and get this issue resolved?

TO share out as afp you need to have file and print services for macintosh installed on the 2k3 Server.
O n the main management console click on the shares icon on the left. then click the "link" create a share. The wizard will guide you through the process. i forget the order of progression but i beleive its the second or third part in the dialog it will have 2 check boxes, the top one checked by default, is to share it for windows/smb the second (lower box) is to share as AFP for mac check this box and change the share name if you like. then proceed through the rest of the wizard. Make sure you configure the security/sharing prefs for access.. we typically remove the everyone policy and add one for Authenitcated Users, and ofcourse Administrators.

OS 10.3.9 and Windows 2003 Server - Can't get to the network

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

How can I open all ports on a Window 2003 Server

How can I open all ports on my windows 2003 server for a specific range of IP addresses?

Hi,
Just want to confirm the current situations.
Please feel free to let us know if you need further assistance.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can oracle discoverer 10 be installed on Windows 2003 server

Hi,
I have couple of queries related to Oracle Discoverer. Need help urgently.
1. Can Oracle Discoverer 4.1 version support Windows 2003 on which Citrix server version 4 or above is installed? If yes, please let me know the patch details to download the same.
2. Can Oracle 10g BI Tool, Oracle Discoverer Administrator and Desktop be installed on Windows 2003 Server Operating System on which Citrix server version 4 or above be installed?
Thanks in advance.
Regards,
Rajesh Gurram

Hi,
1. Discoverer 4.1 has been desupported but was only certified for Windows 200 and XP
2. Discoverer Desktop and Admin is support on Windows 2003:
2003 SP1+ 10g (10.1.2.0.2 )
One thing I have to mentioned is that Oracle does not support any Citrix client operations.
If ever you encounter a problem you will need to reproduce the problem
outside of the Citrix environment to prove that it is not the cause of the problem.
Regards
Roelie Viviers

Sap is installed in windows 2003 server (Vmware) now how I can install and link ....Need Help !!

Hello All,
Main OS : Windows 8.1 Pro
Virtual OS (Vmware): Windows server 2003
SAP is installed on Windows server 2003
I am able to work with sap on Windows 2003 but the log on pad is 640. I want to install the logon pad in windows 8 ... so that I can start SAP from there..
can any one tell me how I can do that..
Thanks

Hi Khan
You can install the SAPGUI 7.30 with latest patch on windows 8. Kindly refer the links
Complete Installation SAP GUI 730 and BEx Front-End - SAP NetWeaver Business Warehouse - SCN Wiki
Regards
Ram

Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2

After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

Can we install Windows 2003 server in a macbook?

Guys!!!
Can we install Windows 2000 or 2003 server in a macbook?
The thing is...i want to get SAP installed in my Macbook leopard, for that to happen u need windows server OS.
soo...is thr ny way that u can install windows server OS in macbook?
Regrdz

To clarify what was previously mentioned... you can only install 2003 Server using virtualization software such as Parallels or VMware's Fusion. You cannot install Windows 2003 Server using BootCamp which is the boot manager shipped with Leopard.

Can a Windows 2003 server see a Netware 6.5 server w/ CIFS loaded?

Similar Messages

Maybe you are looking for