Can a Wireless Router work with Comcast Cable

My son bought a WRT110 and gave up trying to get an internet connection to stay connected. I believe that the problem was the cable modem. Has anyone been successful?

He spent several hours with support in Argentina. They finally told him that the problem was the fact that his telephones were 2.4 MHz.

Similar Messages

  • Trying to get a WRT54GX2 wireless router working with a W...

    Trying to get a WRT54GX2 wireless router working with a WPC54G wireless card. The laptop and desktop both will access the Internet and work when hardwired through the router's Ethernet ports. When trying to access wireless, the Laptop shows to be connected to the router and also to Internet, but Internet Explorer can not access any websites.  Suggestions? Thanks.

    what ip address does the laptop get ?? ensure that the laptop is not set for a static ip add....and it gets an ip add from the router ..

  • Can the wireless printer work with window 7?

    can the wireless printer work with window 7?

    Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

  • What wireless router works with this OS?

    i have bought 2 different routers that are not compatible with this OS...anyone know what wireless router i can buy that will work with OS X Mountain Lion?

    "Cisco Connect" seems to be support software which Cicso may not have updated for Mountain Lion. (It's hard to tell from the Cisco forums.)
    Supposedly, many of the functions on Cisco routers can be controlled through the web interface.
    Support software aside, jdcastaldo is right that the actual routing and wifi functions should be independent of the operating system of the clients.

  • Will a NAS Plugged into a Non-Airport Wireless Router work with TM?

    Will a NAS Plugged into a Non-Airport Wireless-N Router work with TM?
    I'm looking for a backup solution for my new MacBook Air and I don't want to spend $200 extra for a Time Capsule when an NAS would do the job.
    Any guidance would be appreciated.

    No. TM will not backup to any NAS other than Time Capsule

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Which wireless router works best with Apple products?

    Which wireless router works best with Apple products?

    I cannot comment of Airport products, as I have none.  Nor would I suppose to argue with Kappy or Ralph.
    But in a pinch a LinkSys E2500 will work, as it does for me.

  • Problem with Comcast cable modem..

    Ok, I am trying to set up a connection using my Linksys WRT54GS V6.0, I have followed all the steps given in the Easylink setup software, but when I try to go on the internet, it never connects. Can someone please tell me how to successfully install a WRT54GS router to a comcast cable modem? Thank you very much.

    Actually, I like to use the direct approach when setting up my routers. I suggest you login using a browser like Firefox or Internet Explorer. Type in the router's IP address, in the address bar, in the form as http://192.168.1.1 . Every router has some form of IP address. Yours might be different. Check the manual. Once you type that in, then you can login to the router with the standard password preset with the router from the factory.
    Once inside the firmware of the router, then you can make sure everything is communicating with Comcast. By logging in this way to the router, you know that the LAN (local Area Network) communications is functioning properly between the router and the computer. If you can not login to the router itself from the computer using the router's IP address, then you might have a cable problem between the computer and the router.
    Make sure your Comcast modem works directly to a computer first. If that works, then attach the router to the output of the Comcast cable modem.
    There are possibly issues with the MAC address and/or IP address being assigned to the cable modem when the new router is installed. You might have to clone the MAC address. See the following article about: Forcing Comcast to New IP Address
    http://jimwarholic.com/2007/05/forcing-comcast-to-new-ip-address.phpMessage Edited by jimwest on 06-06-200701:37 PM
    Message Edited by jimwest on 06-06-200701:40 PM

  • Trying to get a 3rd Party Router working with BT I...

    Hi,
    I'm trying to move away from the HHub5 on our FTTC BT Infinity connection (40Mb/s). Eventually I settled on a TP-Link WDR 3600 N600 - the flavour which is happy to talk to cable modems and take an OpenWRT install.
    So far I've hooked up a BT OpenReach "white box" modem using the HHub's RJ11 lead, going from the DSL filter into the OpenReach modem's DSL socket.  The modem's DSL LED lights up solid green - which I presume is good?  The TP-Link router is up & running fine with OpenWRT installed, I can connect to it over WiFi and I've hooked up its WAN connection to the OpenReach modem's LAN1 socket (LAN2 is blanked out).
    But whatever I put in the router's PPPoE settings I just can't get an internet connection to come up.  So far I've used '[email protected] (as it's set on the HHub) and a few other suggestions from the forums including 'anything you like' @btinternet.com and @btbroadband.com - nothing seems to get the connection going.
    Is there something I've missed or can anyone suggest a solution?
    Many thanks,
    Steve
    Solved!
    Go to Solution.

    Sorry to answer my own question, but in case it helps anyone in the future:
    I had to put my username in the username AND password fields - same details in both.  I've not seen this written  anywhere online, everyone says to leave the password field blank as it's unused.
    So to recap - this is what got my TP-LINK WDR3600 (OpenWRT based) router working with Infinity: stick [email protected] in the PPPoE usernamd AND password fields.
    Steve

  • HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

    My ancient HP worked with 10.4.11 and 10.5.1 thru 10.5.5 wirelessly. With 10.5.6 thru 10.5.8 installed, the printer did ot work and only the Adobe printer appeared in the Printer/Fax setup. With 10.5.5, I was experiencing random horizontal gray lines, polygons with gradient colors (cyan and magenta) flashing on and off and smeared dialog boxes and drop down menues. So, I upgraded to 10.5.8 and lost the artifacts and my wireless printer. All drivers are current (Software Update delivered/installed updated drivers today.)
    10.6.3 is now installed and I still do not have a wireless printer. The Adobe PDF printer pops up and in the Printer/Fax dialog, it indicates "Kind" as HP LaserJet 4V/4MV Postscript. The Default button is active but all other buttons are grayed out and my printer does not appear.
    Summary: the printer works, the wireless router works and the drivers are current.
    Q. How can I get my wireless printer back? I need it badly.
    Thanks.
    Leonard

    Kappy, thx.
    The driver that is appearing now with the Adobe printer worked fantastically with 10.5.5, HP LaserJet 4V/4MV Postscript. This is from Apple, I believe. My printer does not show up when + is selected in the Print & Fax dialog and the Printer Name/Kind list appears. Only the Adobe is there.
    I d'l'd/instld the Gutenprint. I cannot select it until the printer appears in the Printer Name/Kind field.
    What is SL? :S
    Greg, thx.
    The printer is cat 5 to the ISP's wireless router and I am wireless. This has always worked up to 10.5.5. I incrementally d'l'd os upgrades 10.5.6, 10.5.7 and 10.5.8 and found the printer would not appear when I tried to add it. With Leopard, up to 10.5.5, my printer appeared automatically and I just had to make a selection from the "Print Using:" drop down.
    Bruce, thx.
    AppleTalk was a part of the setup and in 10.6, I cannot find AppleTalk. So you may be right about the IP route. Would Apple change this in the middle of Leopard with 10.5.6 (it worked up to 10.5.5) and not with 10.5.0 or 10.6.0? Would there not be an announcement that AppleTalk printer support was ending? No one in these forums knows that AppleTalk printer support was ended (I first posted in the Leopard forums)?
    Sorry for the skepticism. I just did not think this was a possiblity but maybe you are right.
    Is there a way to get an Apple reading on this? Should I set up a print server for wireless access? Any other suggestions?
    Thanks again all. I much appreciate your help.
    Leonard

  • I recently bought a WRT54G wireless router along with a W...

    I recently bought a WRT54G wireless router along with a WUSB54GC compact wireless adapter and set up both products as directed.I get a message saying connected to the access point but cannot find internet. While connecting to my internet directly,(using a fiber optic cable with no modem necessary)it connects to the internet however using the modem,wired or wireless it still gets the same error. I am not computer literate,so i don't understand abbreviations or where to go to input information into certain areas,so if anyone could help me with step by step information I would be very grateful. Thank you and happy holidays.

    Let me know the Model number of the adapter & the operating system of the computer ......so that i can assit you further ... ..

  • Can a wireless router (station role non-root) associate to 2 APs ?

    can a wireless router (as station role non-root) associate to 2 simultaneous APs ?
    say something like this on an 18xx router:
    dot11 ssid firstAP
    dot11 ssid secondAP
    interface Dot11Radio0/1/1
    ssid firstAP
    ssid secondAP
    what I want is something like two virtual-radios/VLANs/whatever with two independent outside routes; say:
    ip address dhcp for ssid firstAP
    ip address dhcp for ssid secondAP
    where firstAP is my AP and secondAP is a near free hot-spot AP (authentication open)

    Nice idea but unfortunatelty it won't work. You can only associate one radio to a single infrastructure device at any one time.

  • WRT54GC Wireless router problem with iPod touch and Ipad

    Hi
    I have a WRT54GC wireless router and both my ipod touch and ipad can connect to the network. They can both use the internet for like one minute and then the internet becomes very slow, and dies. Network connections are lost and I'm getting messages like 'can't connect to itunes' or 'lost connection with youtube'. The wireless router works fine for the laptops in the house (all windows). In the house where I live in the week (closer to my school) there is another router and i don't have the problem over there, also no problem to connect to my schools wireless network... So I think it's a combination problem of apple products and that router. I've tried a lot, like resetting network configuration, updating firmware, changing from wpa to wep1,... Anyone an idea?
    Thank you
    Bert

    oh and the connection to the router isn't lost.
    Thank you

  • Does office hd work on Apple VGA Adapter and what is anther app work with this cable

    does office hd work on Apple VGA Adapter and what is anther app work with this cable 
    i have persentation and i like to buy this cable but i don't like Kenote i love PowerPoint can it work with VGA Adepter              

    Any help ????

  • WRT54G Wireless Router Installation With Verizon DSL in Windows 2000

    Okay, here's a question that I've got. I am trying to hook up a Linksys WRT54G router to a Verizon DSL connection that uses a Westell 6100 modem on a desktop running Windows 2000.
    Can someone please give me step-by-step instructions for changing configuration settings on the Westell 6100 modem and the Linksys WRT54G modem so I can get the router working?
    And don't suggest going to Linksys Technical Support, I've been on the phone with them for over 2 hours and neither one of the people I talked to was even listening to a word I was saying.

    You can follow these steps:
    Make sure you are online directly from modem
    Connect router, that is, connect modem to internet port on router, and one of the computer to one of the local ports on linksys router
    Login to router's setup by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name
    Change local ip address from 192.168.1.1 to 192.168.2.1
    Turn off modem and router
    After 1 or 2 minutes turn on modem, and another 1 or 2 minutes turn on router
    Now try to access internet, it will work

Maybe you are looking for