Can access my Conceptronic NAS ( CH3HNAS ) but can't open any folder.

I have installed OS X 10.7 (Lion) and I noticed a LOT of people started having problems with their NAS. Basically most people can't mount/access the NAS. My problem is different since I CAN access it but I am not able to open any folders on my Conceptronic model CH3HNAS. I am trying to login using 2 different accounts (the default 'admin' and a personal one) both with admin privileges but I can only see the first level of folders, I can't open any of them. Lion says I don't have permission to see the contents.
I have emailed Conceptronic, I'll post any replies here.
In the meanwhile anyone knows how can I restore access to the folders? Any command line tricks?
Cheers

OK I found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you all.

Similar Messages

  • Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

    Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Can access my album on photobucket but can't copy urls of pictures to put links in. My wife can on her computer and I can using IE. Help

    When I try to get the urls of pictures on photobucket they won't copy (in fact they are not even recognised as copyable).
    I can access them from another computer also using the same version of Firefox or from my computer using IE.
    I am using ver 3.6.13 on Windows 7

    Solved the problem.
    Saved bookmarks into a HTML file.
    Removed Firefox entirely.
    Downloaded it and installed it again.
    Imported bookmarks.
    Works perfectly.

  • Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud.  I have verified the settings.  I can access my iCloud account online but can't send or receive e-mail via the mail account.

    Text limits to the "Question" link prevents a full explanation:
    This is a long-time problem.  I have tried to resolve it with Apple but their "Customer Support" is merely a name.
    I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network.  Verify the settings for 'Apple Email' and try again.
    "The server returned the error:  The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
    Well, I have verified the setting and tried again and again and …
    Well, you get the idea …

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • I can access farmville on internet explorer but can no longer access it on firefox. why?

    I have always played Farmville on Mozilla Firefox. I have all the lastest download, Firefox, Adobe Flashplayer. etc. Now all of a sudden since last night, I can't get into it. I play it through Facebook on Mozilla.
    I can play on Internet Explorer but not Mozilla. Why??

    IE uses an ActiveX version of Flash. Most other browsers use a plug-in version of Flash. Firefox and most other browsers do not use ActiveX. See: [[ActiveX]]
    <u>'''Install/Update Adobe Flash Player for Firefox'''</u>: your ver. 10.0 r42; current ver. 10.0 r45
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.

  • I can access Classic FM via Firefox but can't listen to it.

    Can do so if I disable McAfee firewall (which I'd rather not do, I paid for it) or, in IE9 if I set it as a 'trusted site'. is there somewhere in Firefox where I can set Classic FM as a 'trusted site'?
    Using Win 7, Firefox and McAfee.
    Not sufficiently technical to understand your help pages, or to know what further info you would want. But I am technical enough to be able to set IE9 to permit me to listen to Classic FM and annoyed that I can't do so in Firefox.

    Then use Remote Disc from your MacBook Air as described here:  http://support.apple.com/kb/HT5287
    Grab the study guide (presumably in some format like PDF or something your MacBook Air understands) and place it in a folder on your Air.

  • My search engines do not work. I can access all my bookmarked items, but I cannot search for anything new. I followed all the troubleshooting steps I found but it did not work.

    My search engines do not work. I can access all my bookmarked items but I cannot perform any new searches. This problem has been happening since this morning. I followed all the troubleshooting steps that I could find and nothing has worked.

    Just to make sure, did you check the ring/silent button on the side of the phone? If it is set to "mute" you can still hear your selected ringtone in settings/sound, for example.

  • My tower for my dell computer died.got one from a friend with an existing itunes account. now I am unable to access my library and playlists, but can get to previous ownwer's.I downloaded itunes again using my apple id but was unsuccessful.HELP PLEASE!

    My Dell tower died.  Got one from a friend and am only able to get her account for itunes to appear.  I am unable to access my library even after downloading new using my apple id.  I can access songs I've purchased, but not ones that I downloaded from cds.  PLEASE HELP ME.

    Thank you for using the Apple Support Communities
    From what I understand is that the device will show up in iTunes but it will not allow you to synchronize media over to the device even after you reset the device. When you say you reset the device, do you mean you restored the device in iTunes? What error message you are getting when attempting to synchronize media?

  • I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

    OS X can natively read NTFS of Windows, but not write to it.
    Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
    Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
    If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
    If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
    Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
    Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
    Bootcamp only allows Windows 7, that's it now.
    You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
    CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
    Good Luck

  • I have been using my apple tv to access netflix for several months.  It suddenly stopped working.  When I try to go to netflix from the menu, it says "accessing netflix" but never does.  I can access you tube just fine, but just can't get to netflix.

    I have been using my apple tv to access netflix for several months.  It suddenly stopped working.  When I try to go to netflix from the menu, it says "accessing netflix" but never does.  I can access you tube just fine, but just can't get to netflix.  Any ideas.  I have unplugged everything and waited but nothing helped. 

    Update software. If that doesn't work try resetting.  Mine started working after the update.

  • IPhone 5s can connect to wireless WIFI router but can not access internet.

    iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
    TIA
    Rich

    You IT person should be able to sort this out.  But, they seems to be too busy or disinterested to do this.  Suggest you provide the it person with an iPhone to get interested.
    Any could be lots of things.
    The best you can do is to get access to the admin setup for networking on a pc?  The internet settings are all the same.  Only what names the manufactures change from OS to OS. Check and compare parameters.
    Phone works to internet at home, I assume?

  • EyeConnect says my Samsung 40D8000 'can access this computer' ... but how to I get the TV to access the Mac?

    EyeConnect says my Samsung 40D8000 'can access this computer' ... but how to I get the TV to access the Mac? 
    All I want to do is to have the new TV connect to iPhoto, and if possible, iTunes, on the Mac and although there are plenty of forums discussing problems (such as FF and RW not working) all I want to do is basically CONNECT!
    The Samsung AllShare tool is not seeing the Mac, the Mac is 'seeing' the TV in the EyeConnect setting box (but not in Finder).
    Please help me to get these two guys talking!!!
    Tim

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

  • HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

    Hi everybody,
    I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
    Thanks

    Hello:
    There was an OS X 10.7 update released a month or so ago that fixed this problem.  Run software update.
    Barry

  • I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pa

    I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pages ... N
    == This happened ==
    Every time Firefox opened
    == I uninstalled Norton 360 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; Media Center PC 4.0; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; InfoPath.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    I found a fix for this, not only firefox but several other networking programs were broken as well (Outlook and IE were ok for some reason) so I reasoned that the Norton uninstall was incomplete somehow - I had done it from the add/remove programs in the control panel. Sure enough that's not enough to release Norton's tentacles in your system, there's an uninstall tool on their website (a whole set of them actually) that managed to carve it out completely and after a restart everything was back to normal. My machines will definitely be Norton-free from now on ... N

  • I have just set up Itunes match on my new iMac. It is saying I can access all my 9000 songs but only the playlist tab is live. Am I missing something?

    Hi
    I have just set up itunes match on my new imac. It is saying I can access all my 9000 songs but only the playlist tab is live - I can't access albums or songs. Am I missing something?
    Thanks

    Hi,
    I do not understand your problem. iTunes Match does not change the way iTunes looks. When match process is complete, the match screen tells you how much music you have in the cloud.
    Across the top of screen you have options to select songs, albums, artist, composers etc.
    Suggest that from main menu, select view>show sidebar.
    Jim

Maybe you are looking for

  • Remote Desktop - Pinch and Zoom compatibility with Microsoft Access

    Hi guys, not sure which forum to place this into but here we go. We use Windows 8.1 tablets and RDP to a 2012 R2 Remote Desktop Server, we can pinch and zoom with Office 2007 Excel, Word without issues. I would like to know if there is a list of prog

  • How to test custom UI applications in CRM 5.0

    Hello Experts, In CRM 5.0 how can I run and test my own stand alone test UI components? I have created one test Z application and created a couple of views in it.But when I open the application using bsp_wd_workbench it says "No initial page defined

  • Hard drive error: Invalid Volume Header @ 0: I/O error

    The hard drive I was using in my 2010 MacBook Pro suddenly stopped working. There wasn't any early warnings like clicking or other weird sounds coming from the hard drive, it just suddenly stopped working. I was using my MacBook Pro normally, when it

  • Adobe Air is a huge pain in the butt

    Updated my Flash to CS5 a week ago, then upgraded to PS CS5 a day or two ago. The programs run great. BUT whenever I try to use any of my Adobe program's Help files under the Help menu, Adobe Air tries to launch and then gives me an error message "Ad

  • Reading pixel color from Image?

    Hello frnds, I am making a project in which i have to upload Image, am trying to find color of each pixel in RGB format so that I can locate where my sprite begins in Image !! But I am not able to do so.. do I have to use PixelGrabber to do that? or