Can ACS run commands at logon for specific users?
I have a scenario where I'd like a command run at the time a user logs into the device. Can ACS do this on behalf of the user during the logon process?
Sure. Bigip LTM, once authenticated, drops users into what is called a TMSH shell. This breaks rancid since rancid expects to be in a bash shell.
You can access bash from TMSH via a command(run util bash). I'd like ACS to pass this command and run it the moment the rancid user logs in. That way subsoquent commands from rancid will work since he will at that point be at a bash prompt.
Basically a logon script that runs commands for the user at the time the user logs in.
Similar Messages
-
Disable release flag in service entry sheet for specific users
How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
Can any one suggest?
arjmanHi dear,
In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
this will not allow the user to release the SES.
Hope it Helps,
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 21, 2011 12:40 PM -
Can ACS run TACACS+ adn RADIUS concurrently?
I know that ACS supports both TACACS+ and RADIUS protocols. My question is can ACS run TACACS+ and RADIUS concurrently?
Once you go into Network Configuration, you enter the Network Device Group you want to add the device to. Select the option to add a client device and input the information, but enter a different client hostname, with the same IP Address in each seperate Network Device Configuration. You can specify which Network Device Group for the client to use, and in the specific group is where you will specify which resources the client members will be able to access. I specified a few different groups with different access restricitions, because I didn't want the Dial -In or Wireless people to have Admin Access to my TACACS+ configured devices...
Let me know if this helps... -
Can I run the currency translation for multiple years at the same time?
Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanksYou can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu -
Can I run my creative cloud for teams on more than one computer?
Can I run my creative cloud for teams on more than one computer?
Hi Nick,
We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
Kindly check the point 1.1 from the below mentioned link.
http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
Thanks,
Atul Saini -
Can't run command because user is in read-only mode.
Hi
I try to execute any sql statment i am getting this error.
Can't run command because user is in read-only mode.user493528 wrote:
I am having the same issue with Benthic when I do the With clause.
I understand this is not related to Oracle but did anyone had issue related to this. I am getting the same error. Is it related to ODBC driver of how Benthic use to connect etc.,? I do not know.
Thanks
Gopihttp://www.benthicsoftware.com/support.html -
Can't run itunes is asking for quicktime but keep getting an error message .
can't run itunes is asking for quicktime but keep getting an error message the feature you are trying to use is on a networkresourse tha is unavailable c:\docume~1\test\locals~1\temp\Ixp133.
It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.
-
Can't run the Installation Software for the LiDe 210, need a signed/verified copy???
Hi lanepoor!
So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day! -
Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary system for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..
iCal is designed for personal use, and isn't really meant to handle this sort of situation.
The best suggestion I can offer, though it's a trifle untidy, is: create a calendar for each therapist, giving each a different colour. Enter the availability for each therapist - if it's on a weekly basis you can make them repeating events. Then add the individual appointments, which will show alongside in the daily view. In this example, the 'purple' therapist is available from 1030 to 1700 and has appointments at 1200 and 1500.
If you have more than a few therapists available at any one time it's liable to look a bit messy, but it's the best I can think of at the moment. -
How can i open period for specific user in OB52.
Hi Expert,
How can i open period for specific user in OB52. As 'Authorisation Group' field is there in OB52, how can i use this field to restrict the specific user to post for particular period. How can i creat authorisation group and where can i assign it to the particular user...
Please let me know?
Thanks and regards,
Sam.Hi,
Here is the detailed process as outlined in SAP help.
Procedure
If only a limited set of users is to be able to post in a particular posting period, proceed as follows:
Add the posting period authorization (authorization object F_BKPF_BUP) to the authorizations of the selected users. Assign an authorization group (e.g. '0001').
Enter the account type '+' for the posting period variant to which the restriction is to apply. Enter the period(s) whose use is to be restricted in the first period, those which are available to all users in the second period, and the authorization group (e.g. '0001') in the last column.
Examples
A posting period can be successively restricted. If, e.g. 10 users have the posting period authorization with authorization group '0001', and 3 of these 10 users also with authorization group '0002'.
If the period is only to be accessible to the 10 selected users the authorization group '0001' is entered in the posting period variant. Access can later be restricted to the remaining 3 users by entering '0002'.
Thanks
Venkata Ganesh Perumalla -
How to apply Software Restriction policy for specific user in local group policy object ?
I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject APII achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Data Level security for specific Users
Hi,
Can you please suggest some ideas on by-passing the Data Level security for specific users or specific group?
Currently, we have data level security defined on a group permissions for one group and for people belonging to another group, the security should not apply and they should see entire data.
But, key thing here is that, the user belongs to both the groups.
Any ideas helps.
Thanks,
Chandu.So you are saying you want a user to belong to a group with data-level security filters, but you don't want the filters to apply to that user?
Why are they in the group then?
Are the data filter defined with variables or are the hard-coded?
If variables, you may be able to put logic in initialization block to set the variable appropriately for specific users.
I'd rethink the security model - when I define data level security filters, I tend to force users to only belong to a single group/role. -
Hide settings icon for specific users
Hi
In share point 2013 we have settings icon at top right corner.
Is there any way, I can hide this icon for specific users.
Please help in this regard.
Thanks,
AnilHi Kumar,
Its possible.
1.Open the .master page in some textpad/SP Designer.
2.Look for below tag. This is the holder for SITE ACTIONS
<SharePoint:SiteActions
3.Look for the Menu item templates. These will clearly give you an idea on wht they will hold.
<SharePoint:MenuItemTemplate
4.There will be 2 attributes for each menu item called
PermissionsString & PermissionMode.
In the permission string give the required permission to the user to be shown or hide.
http://sharepoint.stackexchange.com/questions/66628/edit-settings-gear-icon
Please remember to click 'Mark as Answer' on the answer if it helps you -
Log transactions for specific users
Hi, How can I get the log for specific users, such as SAP_ALL : I want to know which transactions they have accessed in the last month for example or if they have accessed to a specific transaction.
Thks !Hi,
try tranction ST03N (Workload Monitor)and select "User Profile" in the Analysis View. There, you can see a list of Users. Double click on any of them to see the accessed transactions.
Kind regards
Dirk -
Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil KumarHello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]
Maybe you are looking for
-
Parent-child relation between Activities
Hello, Is it possible to give parent child relationship between Activities within single Project? The requirement is, parent Activity to take part in overall scheduling whereas the Dates for parent Activity are determined by the child Activities atta
-
After installing Adobe Reader XI 11.0.09 on my Windows 7 x64 operating system, I attempted to print and existing pdf document to my Brothers MFC-J4510DW printer I received error message indicating that no pages where selected (I selected print all pa
-
I attempted to get support on the Mozilla site. As I got on the site I got an article that said there were lots of problems with the latest version of Firefox and that I should call Mozilla at 855-346-5768. I did and these folks that call themselves
-
Need help about xcode 6 in-house distribution.
I have enrolled developer enterprise program, download developer and distribution certificate, add two certificate to keychain. I created a single view app, app id is com.test.idonotknow. created app id using wildcard(just like: com.test.*),created a
-
Epub books directly to ibooks mac like previously iTunes
how can i get epub books to go directly to ibooks mac like they used to automatically go to iTunes?