Can AEBS used as a 4 port switch too?

Or is the WAN port dedicated, meaning I can't use it as a LAN port?

If you configure the AEBS to act as a bridge, the WAN port will probably act as LAN port. That is how it works with the older AEBS.

Similar Messages

Pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

Hi Venkat,
Please ask this question in routing/switching forum. As far as i know you can only configure pa-mc-8te1 as E1 or T1 ports. For more details please visit the below link.
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/8-port_multichannel_t1-ei_8pri_install_config/8port_t1/2738ovr.html
Regards,
Kanwal
Note: Please mark answers if they are helpful

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

No. You need a converter box like this to go with your MDP-VGA adapter:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

Updated to IOS 6 has downloaded the US App Store and ITunes and replaced the UK one so can't use it how do I switch but to the UK store?

Updated to IOS 6 on IPad 2 and it has downloaded the US App Store and ITunes and replaced the UK one so can't use it how do I switch but to the UK store?

Worked out the solution had to log out and then back in

Can i use my firewire 800 port with a usb adapter?

Can i use an adapter in the firewire 800 port to convert it to usb?

Yes, Their are some on the market, but I don't know how well they work.

Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

I'm smarter now. It worked fine.

Can I use the new Air port extreme to scan, print, and share a hard drive?

I currently have a canon 3and1 pixma MP750 printer, and a lacie brick 250gb usb external drive. I'm looking into buying a airport extreme "n" base station and a apple tv to share all my music on my home theater. I'm also planning on updating my current system to an Imac 17" intel duo 2.18g. My question is will I be able to use the scan function on my printer with the air port extreme, or is there away to connect multiple computers to 1 printer? (ie emac directly to printer and airport extreme directly to printer via some product I may not know of) And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
Emac G4 1gig Mac OS X (10.4.1) Shopping for new mac

My question is will I be able to use the scan function on my printer with the air port extreme
Unfortunately, no. The new AirPort Extreme Base Station, like all other AirPort Base Stations, do not support the scan or copy features of "all-in-one" printers attached to their USB ports. This is primarily due to the fact that these features require two-way communications which the USB port does not support.
is there away to connect multiple computers to 1 printer?
Yes, if the printer is Ethernet-enabled, you can connect it to one of the AEBS's LAN ports...or use a Wireless Ethernet Bridge, like the Linksys WET54G to connect the printer wirelessly to the AEBS.
And do you for see any problems sharing the HD drive between the emac, a new imac and a windows based pc with xp operating system if connected throught the airport via usb hub to acomidate the printer as well as the HD?
No, the new AEBS should support this.

11S: can't use ax88179's Ethernet port

As previously discussed in Microsoft's forums, ax88179 is a portable Ethernet card needed for laptops that only have WIFI...like Yoga 11S.
When I download the latest driver Win 8.1 64-bit (both through setup.exe and the direct INF file) and install it, I get this (I use Yoga 11S' latest chipset):
Again, my system is Windows 8.1 64-bit in Yoga 11S:
Can anyone help out?

if all troubleshoot above didn't help, the ultimate thing is try this USB LAN to other machine which have Windows 8.1 to test (Your friend PC or collages) , if issue still persist i suggest you try also to contact Lenovo forum
https://forums.lenovo.com/t5/S-Series-ThinkPads-ThinkPad-Yoga/One-Onelink-dock-Thinkpad-Yoga-problem-solved/td-p/1424537
I found inside that thread there is one person approached himself as engineer from Asix (maybe)
Allan Chou
Technical Support Division
ASIX Electronics Corporation
TEL: 886-3-5799500 ext.228
FAX: 886-3-5799558
E-mail: [email protected]
http://www.asix.com.tw/
Hope this information will help, you are not alone, I checked there is a lot of issue regarding this Asix ax88179 with Windows 8.1 which not solved yet
Anyway, again let us know if there is any update

How can I use the YouView remote to switch HDMI in...

I have the latest style YouView remote with the large YouView and BT Vision buttons.
It's programmed to my control my Sony TV, with channel up/down, volume up/down and power on/off working fine. But there's no button that switches between HDMI inputs on my TV (per my old Sky remote) meaning I still need to retain the use of the TV's own remote for this.
Any ideas?

As far as I know there isn't that option, sadly.
If you like a post, or want to say thanks for a helpful answer, click the white star.
1967 Plus Radio
BT Life
Kafka's World
1000 Classical Hits

Can i use a mini display port on hdmi cabel to connect a ps3 or something??

the hdmi connector of the ps3 or a sat reciever is an output and on the 27" imac the minidisplayport is an input/output , so my question is, can i connect my ps3 or my sat reciever to my imac with a hdmi on minidisplayport cabel to watch tv or play ps3 .
if it does'nt work, how can i do this , or can i do this ??
thanks benedictfromicking

Nope; at least not that I've found. There are only a couple of companies selling such a converter (they probably all come from the same manufacturer) and they're all pricing it exactly the same.
Regards.

Can we use a using a routed port as a gateway instead of SVI on a l3 switch ?

Hi guys,
If I have only a L3 switch and a router.
The common setup would be to have the devices connected to the L3 switch.
Setup a SVI for the VLAN and have the devices's gateway pointing to the SVI.
Then create a routed ported that is physically connected to the router as below
q1) Is there anyway that I can create/use a new routed port as the gateway instead of SVI without adding additional hardware ?
Reason for asking this because I believe in order to use a routed port I would have to add in a L2 switch between the devices and the L3 switch. Have the devices hook up to the L2 switch and connect the L2 switch to the routed port on the L3 switch. Then set the gateway for the devices as the routed port's IP.
q2) In that case, does the routed port need to belong to the same VLAN (100) - as I see in the cisco website that routed port does not belongs to any VLAN.
Please advise.
Regards,
Noob

Hi Reza,
Thanks for coming back.
What i meant for Q2 is
q2) Assuming i am going to use my L3 switch as a gateway as well as for InterVLAN routing - does it mean that the only usage of the routed port is for connecting to the router.
What else can routed port on L3 switch be use for ; beside connecting to a router ?
Can I connect a L3 routed port to a L2 switch and have all the devices connecting to the same L2 switch have their gateway as the L3 routed port IP ?
That I will added in a L2 switch, the L3 switch's routed port will act as the gateway.
Device --> L2 switch --> (routed ported) on L3 switch --> (another routed port) on L3 switch ---> Router.
Can it works that way ?
Regards,
Noob

Can't use alt-f1 to switch to console

I'm using gnome on my NB100 netbook. Everything is working great apart from a few small issues:
I can't use ctrl-alt-f1 etc to switch to the console - nothing happens, and
I can't use ctrl-alt-backspace to kill X - again, nothing happens.
Also, when I shut down from the shutdown dialog in gnome, nothing happens. If I open up a terminal and run "sudo killall Xorg" then X dies and the machine proceeds to shutdown. I can see in the console that it hasn't started to change the runlevel until I manually kill Xorg.
I have checked in xev just in case that Xorg wasn't recognizing the ctrl or alt keys properly, but no problems there.
To be honest I'm stumped. Any advice would be gratefully received.
Last edited by rezza (2009-03-11 23:08:31)

rezza wrote:
I'm using gnome on my NB100 netbook. Everything is working great apart from a few small issues:
I can't use alt-f1 etc to switch to the console - nothing happens, and
I can't use ctrl-alt-backspace to kill X - again, nothing happens.
Also, when I shut down from the shutdown dialog in gnome, nothing happens. If I open up a terminal and run "sudo killall Xorg" then X dies and the machine proceeds to shutdown. I can see in the console that it hasn't started to change the runlevel until I manually kill Xorg.
I have checked in xev just in case that Xorg wasn't recognizing the ctrl or alt keys properly, but no problems there.
To be honest I'm stumped. Any advice would be gratefully received.
Its alt+ctrl+f1

Can I use a NI 6009 DAQ device to act as a switch to close a circuit?

Can I use (and how do I do it)a NI 6009 DAQ Device as a swith to close a ciruit?

You can't use the 6009 as a switch. You can use the DIO to control a switch (like a FET or transitor). How you would do this really depends on your application.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Faulty but refused a port switch as they are alloc...

First off someone at BT/Openreach really does need to address what is a truly broken issue management and escallation process at Openreach. It doesn't take much effort to provide feedback and information to Customers yet Openreach appear to be completely incapable of this.
So, 23rd Aug my infinity that has been working for months goes from 22Mbps down/5Mbps up to 10Kbps down/7.5Mbps up - yes, 10k!
I normally use a draytek 2750n so I swapped that out and put back the standard Openreach modem and HH3 that BT supply - no change in speeds.
So I call BT, go through all the normal off and ons until an engineer visit to the house is arranged for the following weds. The engineer spends a few hours trying to sort it out, confirms that all is fine between the house and the cabinet but i need a port switch - Openreach refuse this as the ports are assigned for new installs. I'm supposed to get a call back to arrange this - no call.
I call BT and they say an engineer will visit the cabinet/exchange on Monday 3rd (this week). I get home in the evening to find that nothing has changed but do have a message on the answerphone from the Engineer informing me that he has sorted a few things out and given a few days everything will be back to normal - that does happen right?!?
I'm straight on the phone to BT who arrange an engineer who will sort everything out today and call me to confirm so that I can check. I check at 5pm today - no change. I ring BT - Openreach cancelled the Engineer because the engineer from Monday closed his call - after I'd rung on Monday and booked for today.
During this call I was told that the Engineer from Monday 3rd had also requested a port switch and been refused, no spare ports ( again I expect they are reserved for new Customers). So despite the message I'd received he knew that a port switch was required. I'm told that an engineer is now coming onFriday and will check everything is working. My obvious question is 'are there now ports available for existing customers'. The response was that the engineer would find out on Friday and book an Engineer for another date if not.
Now as a customer who has a contract with BT I expect faults to be fixed in a timely manner without constant chasing by myself. I do not expect BT to refuse to fix my fault becuase all spare ports are allocated for new customers - surely a breach of contract.
I've now been without Infinity for 2 weeks and I have little faith that Openreach will resolve it next time or put in place the required Engineers to resolve the problem.
Anyone any ideas how I can get a resolution to the port switch I require and ensure that Openreach do what needs to be done?

So another engineer visit to fix the problem. First of all he tries to get out of switching the port but we stand firm and tell him that two other engineers have already identified the issue. Off he goes to do a lift and switch ?
He comesback, plugs in his magic box and tells my Wife that it says we should get 25mb - I'm guessing that this device just reads the profile rather than testing the line as when he used http://www.speedtest.bbmax.co.uk/ to test the speed on our laptop rather than any of the BT sites and showed my Wife that he had managed to get 5Mbps and not to worry as this would increase back over 20Mbps overnight. He did mention that
I get home this evening to discover that we are getting 10k downstream, 4.5m up. How is this possible - well the only way I can think is that the ports have been switched back again. Even if thats not the case why would the speed decrease from what he tested to such a degree and why would he expect the speed to increase by 400%+ overnight?
So, 15 days after reporting the fault, 3 engineers, 3 hours on the phone to a call centre that isnt even the company responsible for the problem and the only thing that has been acheived is a slight reduction in upstream speed. Unreal
Oh, and the call I was promised by a manager in India that would be between 7 pm and 8 tonight to confirm that everything was fixed - i guess it was too much to expect that to happen.
Here's hoping that the Mods are able to help as I don't know what else to do.

ISE 3355 Appliance use of both GigE ports

I am setting up six ISE 3355 appliances 3 in one datacenter 3 in another. They have just installed a new server farm infrastructure using Nexus 5596 and Nexus 2248TP top of rack switches.
I have been looking for documentation on how to do NIC teaming on the 3355 or some way to connect Gig0 to FEX101 and Gig1 to FEX102. Or do I just setup a port channel using LaCP between the two different FEX groups?
Sent from Cisco Technical Support iPhone App

Hi,
This is not supported, you can not team or load balance or use redundant interfaces on the ISE appliances. You can only use a dedicated span port for ISE deployments, or use crossover links for an ipep deployment in HA mode.
thanks,
Tarik Admani
*Please rate helpful posts*

Can AEBS used as a 4 port switch too?

Similar Messages

Maybe you are looking for