Can AIR-AP521G-x-K9 be controlled by the Cisco 526 Mobility controller ?

I am going to buy a AIR-AP521G-x-K9 with IOS software which is a stand alone access point.
However, later on I may buy a Cisco 526 Wireless Express Mobility controller in order to expand my wireless network.
As I know at that moment I need to buy light weight AIR-LAP521G-x-K9 instead of AIR-AP521G-x-K9
However I want to know if the stand alone AIR-AP521G-x-K9 can be control by the mobility controller without doing any change to the AIR-AP521G-x-K9 ?
Thanks

Hi Pak,
The AIR-AP521G can be converted to Controller based mode via software upgrade so your investment is protected should you decide down the road to switch to Controller based. Have a look***;
Q. Which access point products are included in the Cisco Mobility Express Solution?
A. Two Cisco 500 Series Wireless Express Access Point products are in the Cisco Mobility Express Solution; their part numbers follow:
AIR-AP521G-x-K9 (standalone access point)
AIR-LAP521G-x-K9 (controller-based access point)
The hardware for these products is the same. The products have different software,*** but the access points can be converted from standalone mode to the controller-based mode with a simple software upgrade.
Up to three access points can be managed by Cisco Configuration Assistant. More than three access points in the network requires the controller as well.
From this good Q & A doc;
http://www.cisco.com/en/US/products/ps7319/products_qanda_item0900aecd8060c860.shtml
Hope this helps!
Rob
Please remember to rate helpful posts.....

Similar Messages

  • How can you get frame by frame control of the image on a movie buttom?

    Working on IDVD 7.0.4, I'm trying to position still frames for each of my movie buttons. I read the help pdf and the slider worked an several images, but would not let me move frame by frame to select. When I found the image I wanted and selected it, as soon as I clicked away it reverted to a spot several frames later in the movie. Is there a way to move frame by frame in the still mode?

    You may find this useful:
    http://www.kenstone.net/fcphomepage/idvd_07stone.html

  • Recording control with the Adobe Connect mobile ap

    In the Adobe Connect mobile ap, I do not see that it allows you to start (and end) the meeting recording?  This is one critical hosting feature that I do not see supported. Am I missing it?

    More host functions are expected to to be available in future releases of the Connect Mobile app. As of now, I don't believe there is the ability to start/stop recordings in the mobile app.

  • Why has Apple moved Dock controls from the Apple menu?

    So I took the plunge and installed Yosemite. And then hunted for the oh-so-simple control to move the dock from one location to another, as I connected my MBP to a monitor. But where's it gone!! No "Dock" in the Apple menu - panic!! Then I find it in preferences. But why oh why Apple? It was a mouse-hold and single click to move or resize the Dock; now it's Open Prefs, select the dock prefs, then select the position, size etc I want. That's 3 clicks, with lots of mouse movement, instead of one. And this is meant to be progress!
    Why?
    And can I revert to having this control in the Apple menu?
    Thanks

    tbirdvet, surely that's an intrusive and irrelevant question! It's what I want to do, the system should allow me to do it quickly and easily, as it has done in the past.
    But if you really must know, it's because sometimes I'm on my laptop, sometimes I'm on laptop + monitor and they look different, are differently configured and so on.

  • How can I use my IPAD to stream Musik to two Air Port Clients in a network at the same time?

    I want to stream my musik via I PAD to more than one Air Port Clients at the same time. Via MAC it is possible to select "more speaker". In the I PAD I can only select Station 1 or Station 2.

    I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
    Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
    Is there a way to accomplish what I want to do that is reasonably simple?
    You can put time controls onto the offending addresses.
    But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
    Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
    See how to find passwords here.
    i forgot my password for my router, how can I change them.
    So anyone can discover your passwords without your knowledge and leave no trace on your system.
    If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
    The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
    Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
    You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

  • Where is the remote volume control in the new ITUNES - I cant adjust my volume control remotely on my Zepplin Air anymore

    Hi I have downloaded the new itunes 12.01 - since then I have had nothing but trouble with my Zepplin Air. Now I cant remotely change the volume control on it, only being able to change it on my connect

    I did try that too (was already turned on). It seems like this is a big step backwards, since even if control center worked in YouTube, it requires stopping the video, opening the control center, closing it, and restarting the video. Very counterproductive to simply restoring a volume slider on the basic You Tube controller, next to the timeline slider. Again, I appreciate the help. For now, I can use the buttons on the side of the iPad (not as convenient), and hope  a newer version of You Tube will restore volume controls that work in next upgrade.

  • My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    MDM  -- moble device management 
    MDMs
    Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
    For a comparison see this page:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Profile Manager by Apple
    Zenprise
      http://www.zenprise.com/

  • My macbook air will not restart, because it says the "mail" cancels  the restart, but I can not quit mail.

    How can I get my Macbook air to restart? Each time I try to restart my laptop, I am unable to because it says "mail cancels the restart". However I am unable to quit mail. Please Help.

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
    If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

    I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

    Water + electronics do not mix.  Something was damaged insode, and the logic board may be corroding as is.
    Take it to a Genius Bar for an evaluation and repair estimate.
    This is accidental damage and not covered by warranty.

  • HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

    i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    Great tip Stephen!!
    I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
    Thanks for the tip. This question should be tagged as answered.

  • Win 7 After uninstalling Firefox from Control Panel, "The action can't be completed because the folder or file in it is open in another program"

    Update failed numerous times. Uninstalled FF using Control Panel. Followed instructions to delete the Mozilla folder from AppData/Local/Mozilla. Then the "Folder in Use" prompt comes up and I have to cancel the delete. Folder was created 4/8/2011, but I can't find the folder using the search command. Can't install a fresh install of Firefox 18. Using Windows 7 64-bit. I no longer have FireFox on my system that I can see.

    Okay, I drilled down further:
    Specifically, the files I cannot delete are:
         A driver with the following location:
              Program Files > Common Files > Apple > Internet Services > ShellStreams.resources > en.lproj >ShellStreamsLocalized.dll
         And a driver with the following location:
               Program Files > Common Files > Apple > Internet Services > ShellStreams64.dll

  • Can I have a library of PDF docs with version control? Can it cope with version nos. embedded in the file name?

    I manage a set of documents which are edited in Word but "published" as PDFs (using Word 2010's save to PDF capability).
    I want to create a library for them on SharePoint (my company has SharePoint Online via its Office 365 subscription).
    I'm pretty much a SharePoint novice but even I can see it's easy to upload the documents to a simple library. The things that are giving me a headache are:
    Can I tell SharePoint what the version number of the uploaded PDF document is? The version number as understood by the library needs to match the version number written into the document (where it is called a revision number and increments in whole numbers
    starting from zero).
    How do I handle replacing the uploaded PDF documents with new versions? If they were Word documents I could edit them by opening them from the SharePoint library, checking them out if necessary, and SharePoint would handle version control.
    But since the PDFs are generated from editable masters (Word documents) which are NOT on SharePoint I would need to edit the local Word document on my PC then generate a PDF version then upload it to replace the existing PDF document in the
    library. Is it easy to upload a new document over the top of an old in a SharePoint library?
    Hoping someone can give me some answers.
    Regards,
    Bruce Officer

    hi Bruce,
    1. It sounds like what you need is to set the starting version number since your revision number increments in whole numbers, it would match up to SharePoint once the starting version number is set. You can potentially create a new custom field in the
    library to manually track the version of the uploaded PDF document, but this might not match up with SharePoint's own version number and could get confusing. Another possibility is to upload dummy versions of the PDF document until the SP version
    matches with the revision version and then delete these dummy versions.
    2. When you upload the PDF document again into the library, it should prompt you to see if you want to replace the existing. If you proceed with the upload, it should replace and increment the SharePoint version number.
    Please Mark Answered if my reply solves your problem. Thanks!
    Jeff Thai
    Technical Solutions Architect, AvePoint
    http://www.AvePoint.com

  • How can I use multiple front panel controls to be mirrors of each other?

    Hi All:
        I know this is going to be a strange question, but I have multiple inputs that control one output.  This in itself not necessarily difficult, but I have a strange need.  If one of the control inputs change I would like this to be indicated by the other controls.  For example, I have a slider, numeric and dial controls on the front panel that control RPM.  If the slider changes to 1000 RPM I would like the numeric and dial controls to see that change.  Is this possible.  If so, can you give me advice on doing this.  I am using 7.1.  Thanks for the help.
    John Honnold

    What you want is not that hard, but asked for a rather  limited times.
    Here's a how to:
    Drop a slider
    Right click Visible items-> Digital display
    Right click on the slider Advanced-> Customize
    Right click on the Digital display Replace select the control you want to replace it with (a gauge for instance)
    Right click on the Gauge Visible items -> Digital Display
    Now you have one control with three control options:
    This was done in 8.2 but I think the same goes for 7.1
    Ton
    Message Edited by TonP on 04-06-2009 09:52 AM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    Example_VI.png ‏7 KB

  • How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only?

    How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?

    You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for