Can airport express send a G and a N signal at the same time?

I have two macs with wireless N in my home, and two pc's with wireless G. Can the airport express broadcast a wireless G and N signal at the same time? or does it need to be one or the other?

I purchased 2 airport expresses today and the answer to this is yes

Similar Messages

  • Can AirPort Express connect a wireless and a non-wireless at the same time

    Hello everyone,
    I have both a PowerBook G4 with wireless card, and a 17 inch iMac G4. Is there a way to connect both of them to the internet using the airport express?? can the PB access via wireless and the iMac via the usb port perhaps?? right now I connect the non-wireless directly to the broadband modem using ethernet.any pointers will be really appreciated!!
    Thanks

    If you have a single Airport Express then the answer is no.
    The USB port is for printing only.
    iFelix

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • Can I set up wireless internet and a wireless printer at the same time?

    I have an AirPort Express configured already which allows wireless access to the internet (as it is connected to my broadband router) but can I also configure it to allow wireless printer sharing at the same time?
    I would appreciate an answer on this as I have been unable to determine it so far.
    Many thanks

    The Express has a single Ethernet port, whereas, the Extreme has four would be one of most distinguishing feature differences. Obviously size differences would be #1. (ref: Identifying AirPort Hardware)
    When connected directly another router, you have (effectively) two routers in series. In this configuration, the AirPort Express would need to be reconfigured as a bridge. This will allow the broadband router to provide both NAT & DHCP services for all the wired/wireless clients connected to either router.

  • Can i listen to i tunes and use another app at the same time on ipad 4 ?

    I've been trying to figure out how to listen i tunes, or listen to music on a web music site, and play a game at the same time, is that possible to do on an iPad 4 ?

    I can listen to Tunein Radio and play Coin Dozer and Burst Bubble at the same time.
    I can also play music on iTune an play Coin Doser and Bubble Burst at the same Time.

  • Can't i use xml schema and oledb data connection at the same time?

    Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
    Can't i have both schema and oledb and the exported xml be as i want it?

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • How can u have lock rotation off and mute feature off at the same time

    How can u have lock rotation off and mute feature off at the same time

    Maybe this will help. The link at the bottom is the same one that was posted above.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can i send multiple videos and photos, via mail, at the same time?

    you allowed to send only one video or 10(+) photos via mail.
    but can you send both at the same time? so 10(+) photos and a video (or more than one) in one mail?
    because if my mom has birthday pictures or something like that. She likes to be able to send it directly from her iphone to every person she knows in just one mail.
    anyone any tips or tricks?

    Those restrictions are generally part of the email provider, not just the phone. Attachments are restricted due to size, bandwith use, etc. Trying to send that much information in an email attachment is even restricted on a computer. Sharing via photo sites is generally a better option for large amounts of pictures and large video files.

  • Can a single AE receive and deliver multiple signals at the same time?

    I've looked through the forums and the AE pdf manual and have not been able to find a definitive answer so far.
    We have a (all Apple) cafe in a remote location with no Apple support and we presently operate wireless music and wireless internet for customer use from one iMac and one AE. The iMac is also our cashier station. We have another iMac for customers who don't have their own laptops. The iMacs switch to screensaver displays promoting the cafe when not in use.
    Our wired TV monitors that are currently not associated with our AE display either satellite TV, cable TV or from DVD player using a manually switched hub with the three separate receivers wired to the hub.
    We want to add streaming TV from the internet to the TV monitors so we will have four sources. I am looking at connecting this internet streaming TV source to the TVs via AE hence I want to also allow the other TV sources to operate via AE. If possible, we would also like to switch in the screensaver from one iMac on a timed basis (or using Apple remote to one iMac) if there is nothing else of particular interest on the TVs.
    The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?

    The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?
    The AirPort Extreme base station (AEBS) does not have a TV or video output.
    The AEBS, just like any other router, supports multiple clients simultaneously. Of course there is always bandwidth limitations for any device. So in theory the AEBS can support all of that. In reality the performance of each service will depend on the bandwidth used by each and the bandwidth available. This is no different than any router.

  • Can I run CS6 on Desktop and CS5 on Laptop at the same time?

    First off, let me start by saying I am a small business owner. I am at work between 10 to 16 hours per day, every day. I have very little time in my life that I am not sitting at my main desktop macintosh, unless I am sleeping.
    All of my my work files are on my desktop computer in CS5. I plan to keep using CS5 for all working files for now. I only purchased CS6 to backsave.
    But I want to LEARN CS6, and slowly work into it before I make a sudden, or dramatic, change.
    I want to do turtorials and go through the CS6 learning curve on my laptop. It sits peacfully at my side, all day every day. Any downtime I can be playing, learning and experimenting. Without fear of doing any damage to my CS5 files or my main production mac.
    If I try to run CS5 on the desktop and CS6 on the laptop, at the same time -- will they CALL HOME, STOP, FREEZE, LOCK UP, or and send me, in any form, to ADOBE JAIL or ABUSE CENTER?
    Does anyone have an answer for this?

    Thank you both -- you have made my entire day. I thought I could, but was worried that something terrible would happen. Which I am worried about to begin with. It will be great to be able to learn all of the componets of the full Desging and Web upgrade, at my own pace, in my down time.
    Truly appreciate your time and your replies  

  • Can't we listen to 48KHZ and 96 KHZ sounds at the same time?

    I have bought E-mu 1212M card. My problem is : I cannot listen to windows sounds or any sound file at 48KHZ when I am at other internal frequencies.
    Forexample , when I switch to 96KHZ with Patchmix dsp all the sounds of windows ( media players, applications...) muted and I can only hear 96KHZ applications. So I can use DAW programs at 96KHZ but cannot use other programs to listen to sound files which are usually 44.1 or 48KHZ. I cannot choose them to integrate DAW because of silence.
    I want to hear all the sound at the same time. I could do this with my all sound card before. Why can't I use all the sort of sounds ?

    Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
    Mike

  • Can I use a magic mouse and apple track pad at the same time with my iMac

    Can any one help with my above question

    Yes, you can use the magic mouse, trackpad and wireless keyboard at the same time.
    Captfred

  • Can I have Acrobat Pro 8 and Reader 9 installed at the same time?

    At one time I had installed the trial version of Acrobat Pro 9 but it expired and I had a heck of a time getting it off my system and reinstalling version 8. I've got that all taken care of now but I would like to be able to run Acrobat Reader 9.
    Can I install Reader 9 over (or in addition to) version 8 or will things blow up? After all the pain and suffering of getting it whipped back into shape, I don't want to try unless I know that it's possible without causing problems.
    Please advise. Thank you!
    Jo

    Thanks for your help. I guess I was afraid of what the answer would be. I'll just have to bite the bullet and hope for the best. If it doesn't work well, I just hope it's not a bugger to undo.
    And one of these days I'll just have to upgrade the whole lot!
    Jo

  • How can I listen to radio (firefox) and play a game at the same time

    Samsung S5 / lollipop When I listen to radio and switch to another window, the radio stops playing.

    Hi mmm2015
    I assume you are using Firefox for Android to listen to radio in one Firefox tab and you are switching to another tab and the music stops right?
    # Could you please let us know the URL of the radio website?
    # As well could you please let us know the exact steps you followed to reproduce this problem?
    Cheers!
    ...Roland

  • How can I listen to mp3's and read a book at the same time?

    I read a language book, and follow the words by listening to the mp3's at that same time.
    How do I do this?

    Press play in the music app, switch to the book app and start reading. Audio automatically continues playing in the background.

Maybe you are looking for

  • Broadband dropping out

    It seems that every couple of days at random my broadband connection drops and I have to wait for my home hub to reconnect. It has only been happening during the last week. Last Monday I had an engineer out to reconnect the lines coming into my house

  • Calibrating a tablet for digitizing drawings

    Hello, I'm trying to use a digitizer tablet in Illustrator but I can't figure out how to calibrate it so that the vectors come out at the right size/length regardless of the zoom level. In CAD, the 'tablet' command allows you to pick two points on th

  • Table for tcode Y... created with se43

    Hi, i change the sap-menu with se43 and insert an own abap. The system creates a new tcode Y... . When i look into table TSTC i find the tcode wich is created with SE43 with the text of the menu, but not with the abap-name. Where can i find the relat

  • Blocking one time vendor

    All SAP Gurus, I want to block one time vendor, for that I have used MK05 Will blocking from MK05 is sufficient for blocking it completely, means no further invoices should be posted for this vendor. Regards, rajan

  • Assigning element in xsd to message type

    Hi! I have a problem in assigning an element in a xsd file to a new message type. When I create a variable with this message type, an error, unresolved message type, is raised. Can anyone help me, please ? I tried all the possible ways (that I know)