Can Akai APC 40 be used to control Mainstage?
Sorry if this is a basic question. But, I just ordered the Akai APC 40 for Ableton Live but I also incorporate Mainstage into my live sets.
The APC 40 is obviously streamlined for Ableton... But, will it still work with Mainstage 2?
Many thanks!
Blueberry wrote:
Not everything works, because it is designed to only work with Ableton Live.
I figured... So it will probably be hit or miss correct? I'll probably just stick with my nanokontrol and keyboard when I'm performing my mainstage sets...
Thanks!
Similar Messages
-
Using expression controlling Mainstage
Do certain logic instruments not respond to expression? I have a pedal plugged into my controller mapped to cc#11 for all instruments. Evb3, ES2, and others respond to the pedal like they should, while ES1, the Fm synth, and a few others won't respond even though I see the expression indicator changing in the channel strip.....can someone explain this? thanks.
Without going into a case-by-case analysis, yes. But there are loads of preferences you can change & edits you can make to affect how instruments respond to controllers. It's a big topic, but try looking at both the 'Controls' & also the 'Editor' views for each instrument for a start.
Sometimes you just need to switch it on (& usually it was off because the original patch wouldn't have used that controller in 'real life'). -
Could someone please tell me where I can info on how to use the controls I.e live pause,forward,rewind etc when watching live shows on my ipad mini please.
well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.
-
How to use custom control in Dialog Programming?
How can I call a subscreen using custom control in Dialog Programming?
The required subscreen contains a calender. Any class or something available for this purpose. Please suggest.As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
Regards,
Raymond -
How to use Print Control in Print List.
Please any body can explain me how to use print control when creating Print list?
Thanks in advance.Please any body can explain me how to use print control when creating Print list?
Thanks in advance. -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
How can I use table control to enter data
Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards, -
I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo
Good work, thanks for the report.
-
How can I copy a webpage that will not let me highlight it, i.e. use the control c key strokes?
How can I take a picture of a webpage that will not let me use the control C copy command? In other words, on this particular website, I try to highlight a passage that I want to save and put in a document, but the highlighting will not work. I asked them about that, and they simply said they did not have that facility, but I think the issue is protecting their copyrighted material. I know there is some way to take a picture of the page, and then I can use my picture editing software to crop it and enlarge it.
Are you trying to take a "snapshot" in a PDF?
If the part of the page or PDF you want to capture is fully visible, you can use the Windows print screen function to capture it. Either use the Print Screen key to capture the entire monitor display, or Alt+Print Screen to capture the active window.
If you need to do this often, or if you want to save the snapshot straight to disk, or if you need more than fits in a single Windows screen shot, an add-on such as [https://addons.mozilla.org/en-us/firefox/addon/fireshot/ Fireshot] can be handy. -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
go on certain websites, but i can't use parental controls on my account because i'm the administrator. How do i prevent access to websites?
Thanks for the reply, BUT --- i can't fool myself. I can make all the other accounts i want, but i'll still be able to get into the admin account and therefore have access to the websites i don't want to have access to. Is there a way to block websites from ALL accounts?
-
My daughter's iPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.
VoiceOver is an Accessibility feature while Voice Control allows you to control the Music app via voice.
To turn off VoiceOver triple click the Home button and go to Settings>General>Accessibility and turn it off. Use three fingers to scroll if necessary.
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
iOS: Getting started with VoiceOver for accessibility -
How can one use Mission Control with two monitors? Please bring Spaces back
How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBBI use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous. -
How can i use activeX Control in labview?
how can i use activeX Control in labview?
please describe me step by step.
thanks.Well..that was quite helpful..but now I'm encountering certain problems. I've attached the VI I've made.
I don't need sound at the moment so I dropped it. (Although I tried to play it..but all I could hear was a very annoying sound.) Secondly I don't want to display any date or time..so i dropped that property too.
Now when I run this Vi...the webcam turns on, the screen of videocapx pops up..then the webcam light goes off..and another pop up appears saying..labview is not responding..and i have to close it reluctantly.
I haven't placed the stop capture property in this vi. i checked it by placing it too..but that doesn't work.
I would like to notify that my actual task is to acquire image and then compare it with another one already present on my pc. I want you to please help me out..solve my first query then I'll proceed with the latter part.
Attachments:
activexvideocaps.vi 20 KB -
What is the use of control breaks in reoprts?how can we use them in report?
hello all
what is the use of control breaks in reoprts? and how can we use them in reports?hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
ROLLNO TYPE I,
SCODE(3) TYPE C,
ROLLNO TYPE I,
SNAME(10) TYPE C,
MARKS TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
D(3) TYPE C,
TOT TYPE I,
STU TYPE I,
MARKS TYPE STANDARD TABLE OF S_MARKS,
WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
AT FIRST .
ULINE.
FORMAT COLOR 6 ON.
WRITE:/ 'SUBJECT CODE', 65 ' ' .
FORMAT RESET.
FORMAT COLOR 6 ON INTENSIFIED OFF.
WRITE:/20 'ROLL NO',
40 'SUBJECT NAME',
55 'MARKS',
65 ' '.
FORMAT RESET.
ULINE.
ENDAT.
ON CHANGE OF WA_MARKS-SCODE.
IF SY-TABIX NE 1.
NEW-LINE.
ULINE 40(25).
FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
TOT = TOT / STU.
WRITE:/40 'AVERAGE MARKS =', TOT.
FORMAT RESET.
CLEAR TOT.
CLEAR STU.
ENDIF.
FORMAT COLOR 6 ON INTENSIFIED ON.
WRITE:/ WA_MARKS-SCODE.
FORMAT RESET.
ENDON.
FORMAT COLOR 6 ON INTENSIFIED OFF.
WRITE:/20 WA_MARKS-ROLLNO,
40 WA_MARKS-SNAME,
55 WA_MARKS-MARKS,
65 ' '.
FORMAT RESET.
STU = STU + 1.
TOT = TOT + WA_MARKS-MARKS.
C = STU.
AT LAST.
NEW-LINE.
ULINE 40(25).
FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
TOT = TOT / STU.
WRITE:/40 'AVERAGE MARKS =', TOT.
FORMAT RESET.
CLEAR TOT.
CLEAR STU.
ULINE.
FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
WRITE:/ ' TOTAL STUDENTS : ', C.
FORMAT RESET.
ENDAT.
ENDLOOP.
reward points if hlpful.
Maybe you are looking for
-
Unable to extract data from R/3 into BW 3.5
I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wr
-
Text missing from the navigation bar
hi, i'm really hoping someone can help, as apple tech, say they don't support iweb. i have just started using iweb 09, so i have created a new site and chosen a template, but i have not text displaying in the navigation bar, i can turn it off and on,
-
Re: How can I find my cabinet number and when it w...
Hi, I've been told by BT help chat that my address can get BT Faster Broadband but not Infinity. I'm connected to the Trowbridge SSTRO exchange which is apparently "FTTC available in some areas") Presumably that's to do with the distance of my house
-
Hi Experts, I have a requirement where the client wants to pay the some medical amount to the employees on the basis of the following formula: 8% of the last three month basic salary(actually paid) This amount is paid on quarter basis. My problem is
-
Could someone throw some light on this kinda error after F110 Payment run .The error says IDoc type could not be determined for the IDoc Should I check anything in House Bank Determination.? Please help me resolve this. Thanks G