Can Amazon Kindle be connected via Airport Extreme ?

Is it possible to register Airport Extreme as a Wi-Fi connection with the cheaper version of Amazon Kindle ?
If so , what do I need to do?
James

It should. The AirPort Extreme Base Station is capable of providing all current Wi-Fi radio modes on both the 2.4 & 5 GHz radio bands. Any Wi-Fi enabled Kindle shouldn't have any issues connecting to it.

Similar Messages

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • How can I print from ipad2 via airport extreme to hp printer on USB.

    Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

    Apple - iPad - Print right from your iPad with AirPrint.
    Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
    Check the HP site. They may have an app available you can use for your USB / Airport printer.

  • Can my iPhone print to printers connected via Airport Extreme?

    Hey forum,
    So I know this thread has been brought up more than a few times, but I feel like either new information could have been found or Apple has initatied some sort of change to allow it. The basic scenario is that in two households (one my own, the other a relative) housing a Time Capsule and Airport Extreme Base Station, each with a printer connected via USB. Things work perfectly on my iMac, MBP, and Windows machines but my iPhone won't print because of the Airprint shenanigans that I don't understand. Essentially, can I print from my iPhone now without any hacks or third party apps?
    Thanks!
    Ethan
    Used products include: iPhone 3Gs (iOS 5.0.1), iPhone 4 (iOS 5.0.1), MacBook Pro 2.16 Core 2 (Mac OS X 10.7.2), iMac (Mac OS X 10.7.2)

    Air print is for Air print enabled printers only.
    There are some wifi printers that have there own app that allow you to print to them, but onlt limited apps will be supported by this.

  • Can you search an external hdd connected via airport extreme

    I have my western digital 500gb harddrive connected to my airport extreme so I can use my HD wirelessly. I tried searching for files in my wireless harddrive through finder, but it doesn't seem to search it, only on my macbook itself. Is it possible to search the harddrive wirelessly?

    Smokerz,
    could you explain??
    I spent over an hour with Apple Tech support and they said that Finder/Spotlight WILL NOT search a networked drive. However, I did find a bit of a work around:
    1. In Finder Preferences: General - Select check box - 'Always open folders in new window'
    2. Open up a Finder window
    3. Select Airport Extreme. (Left column, Shared, name of Airport base station)
    4. Select networked drive
    5. Double Click a folder in your network drive that you want to search (this opens new window)
    6. In the new window, type what you need in the search window (upper right hand corner).
    Remember: The Finder window will default to the 'This Mac' in the search column (light grey line below the Toolbar)
    7. In the Search column, This Mac and Contents are selected in Dark Grey. You should see
    Search: *This Mac* "folder name" Shared | Contents File Name
    8. Now select "folder name". This will search the contents of the selected folder and bypass your Mac.
    If there is an easier way, could you please explain. TIA
    Narvon
    PS - If you try to select your networked drive in a new window as in step 5, this still won't work. You can only select specific folders within the drive. Lastly, you can move all your folders and files to 1 folder, however, this increases the search time (My network drive is 320GB in size and a search for 1 known file took just over 3 minutes).

  • "No Internet Connection" via AirPort Extreme bridged to Time Capsule

    Hello,
    We have a fairly large and odd home network consisting of a Comcast cable modem connected to a Netgear router, a Time Capsule wired to that one floor down (serving up WiFi and DHCP), and a new AirPort Extreme wired one floor below that, extending the WiFi network of the Time Capsule and set to bridge mode.
    On one MacBook Pro (and possibly others, haven't had them available to test yet), trying to connect to WiFi while downstairs (i.e. to the AirPort Extreme) yields a strong wireless connection, but "no Internet connection"; checking via network diagnostics or the Network panel reveals that the MacBook Pro has no IP address. This seems odd, as it happens even if the connection is first made on the 2nd floor to the Time Capsule, where a valid IP is retrieved, and then carried downstairs; even though the same IP address should be valid, the laptop's WiFi menubar icon starts cycling again and eventually shows the "!" and reports no Internet connection.  Checking the Network panel reveals no IP address via DHCP.  However, if I let it sit for a minute or two, the IP address comes back (the same one!) and all is well, at least for a while.
    I've tried switching to a manually-assigned static IP as a workaround, and that works perfectly well, but I'd like to get DHCP working properly if I can, for convenience's sake. Is there any reason why I should be having trouble with getting DHCP from the Time Capsule via the AirPort Extreme?

    Actually, yeah, my predecessor explained that he was running DHCP on the Time Capsule instead of the Netgear because he hadn't needed DHCP prior to the adding of a WiFi point (all other nodes were on Ethernet), so it had always been turned off on the Netgear. But your suggestion makes a lot more sense, of course, so I've put the Time Capsule into bridge mode as well and started the DHCP server on the Netgear. Seems to be working with my iPhone, though that was always working okay. I won't have access to the laptop to test it until later this afternoon, but I have high hopes. 
    Thank you!

  • Can't print from Macbook via Airport Extreme.

    I have just got myself a White Macbook and have it connected to my Airport Extreme. I already have an imac connected and everything is working fine internet wise but if I try and print from the macbook via the imac a window comes up saying 'Canon MP610 series @ newimac - connecting to xxxx-xxxxx-computer.local. on port631...' but nothing else happens. My firewall setting on the imac is at 'Allow only essential services'. If I change it to 'Allow all incoming connections' the printer works. I do have printer sharing switched on in both machines. Any help gratefully received. Thanks, Kevin

    Try changing your firewall settings to set access for specific applications and services. This should allow printer sharing, while still keeping things blocked that you don't want.

  • Facetime "Fails" to connect via Airport Extreme using Comcast?

    Greetings,
    First time poster... tried researchings specifics on my situation and couldn't find anything so posting here to see if a solution has been found. 
    I used to have Verizon DSL for ISP with Airport Extreme as my wireless router.  Everything worked  including Facetime (only issue was the need for speed).  Switched to Comcast as ISP which uses cable and had the Tech reconnect it to the Airport Extreme to behave as the wireless router.  Internet is on and good... got a green light on the Airport Extreme.  However, when attempting to connect via any device using Facetime (it will ring but as soon as it is answered I get "Fail" message and it ends) be it my laptop, desktop or either of our iphones I have IOS7 and IOS6 respectively same error.  Did not make any modifications to Airport settings or any of my devices. 
    When checking the common response to this issue was a potential "Blocked Port" situation... but by digging a little deeper it appears that Comcast does not block ports that are relevant to Facetime (please confirm).  I didn't see anything else that would suggest a solution at this point. 
    Help would be greatly appreciated as we enjoy using facetime to have our 6 month old daughter connect to our grandparents.
    Thanks,
    Andrew

    The USB port on an AirPort Base Station other than the 802.11n model is only for use with an USB printer; hard and flash drives will not be recognized. The compatible base stations include version 5.0 of the AirPort software on a CD.
    (27846)

  • HP Printer not connected via Airport Extreme 802.11ac

    I recently upgraded from an Airport Extreme 802.11n to an ac and my HP D110 Photosmart printer is no longer connected wirelessly. Is this an HP issue and can it be resolved? Both MacBook Pro and iMac run Yosemite 10.1.1 and have great Internet connectivity. The printer worked fine until the Airport upgrade.

    You changed devices that provide your wireless network.....but the HP printer still thinks that you are using your old router since it has not been given instructions on how to connect to your "new" network.
    I don't have an HP printer here to check, but in general the process would be to reset the printer back to its original default settings, just as it came out of the box when it was new.....so you can then set it up to connect to the "new" network.
    Your HP Setup Guide will likely tell you how to do this. If not, you can contact HP Support for your printer using the link just below:
    HP Photosmart e-All-in-One Printer - D110a | HP® Support
    With good luck, another user who might have the same printer may see this post and be able to offer more specific information.

  • Lost my adsl connection via Airport Extreme?

    Hi
    Been running my adsl connection via winXP SP1 laptop thru AE (also iBook /Imac FP} with no problems - now whilst i was trying to access files on the win machine (using iFelix guide) i seem to have messed up!!!
    I have the 'Wireless Network Connection' icon in the system tray showing my network and 'excellent' signal - as previous.
    When i try to get on the net the 'dial-up' box keeps coming up trying to dial my previous dial-up account - i believe i hace altered something here!!!
    When i click on 'status' in the sys tray icon - 'general' shows - connected but 'support' does not show address type / IP address etc all show "unavailable" - 'Repair' is greyed out.
    When I 'View available networks" i get the 'connect to wireless network' box my network is shown as available and requests my wep ket to connect!!!
    'Advanced' shows my network in both the available and preferred boxes - opening preferences shows wep enabled and my network key already entered!!!
    I've now deleted the old dial-up settings so there is nothing showing in the dial window.
    Any ideas please - i need to get this win machine operational before my partner returns - and then persuade him to get a mac!!!
    thanks
    ianjh
    norfolk
    uk

    It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
    Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
    Then, let's set it up to work with your cable modem...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Modem/Router Power ReCycling (optional)
    - Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AX; Wait at least 5 minutes.
    - Power-on the computer(s)
    Setup the AX
    With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

  • Another slow internet connection via Airport Extreme wireless thread

    Has anyone actually solved this mystery? The last substantial thread I came across regarding this subject ended with a solution using a dell wireless driver. That ended somewhere in December. Any solutions, tips?

    I seem to have found a fix, thanks to Michael G. Noll (http://www.michael-noll.com/blog/2006/07/24/intel-imac-wireless-connection-slowd own-with-wpatkip/).
    I switched to WAP Personal from WEP and my iMac is now able to connect via wifi from a router in another room, and at normal speeds! Thanks Mike! I hope it lasts. I also changed my routers channel and made it static instead of automatic, but I don't think this had anything to do with the fix (though it may have solved my MacBooks problem of dropping the connection for a second every minute or 2).
    I still have the problem of having to manually select my network after start-up and wake-up, however. It does not turn on automatically.
    (Brand new Intel Duo iMac and 1-yr old Intel Duo MacBook)

  • How do I access my hard drive connected to airport extreme?

    I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
    Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
    Thanks again!

    sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
    Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
    However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

  • Can't get on line using Airport extreme.

    Today I switched to cable modem and when I am connected directly to modem I get on line easily. However connecting via Airport extreme I can not get on line. Not sure if I am connected correctly. Which port does modem cable go in? Which port does cable to computer go in? Anyone else having this problem?

    The cable modem must be cabled to the Airport Extreme WAN port - it is labelled with a "circle of dots" icon.
    After cabling the two together, pull power to both the modem and the Base Station for five minutes or more. Then plug the modem into power and wait a minute. Then plug Base Station into power and wait for it to boot up. Then see what happens.

  • Syncing iCal, Address Book and Safari Bookmarks via AirPort Extreme?

    Does anyone know of a way to keep iCal, Address Book and Safari Bookmarks in sync across three Macs that are connected via AirPort Extreme? I don't want to use MobilMe at this time.
    Thanks for any help or suggestions.
    Frank

    Hey, Lehmann:
    You need a server to process the information being sent out by your Macs. The server is what will determine which machines need what information, and will initiate the transfer. The Airport Extreme can't be this server as it only contains the functionality of a router. Most developers opt to develop WAN-based syncing (ie, MobileMe, Exchange, etc.) because LAN would be covered under that umbrella, so it's two for the price of one (I also think syncing over WAN is more convenient and more often the desired solution).
    I don't know of any LAN-based syncing solutions (ie, one that would turn one of your computers into the server to process the data and manage the syncing), but I can at least give you some of the tech language to help define what you're looking for and help your search.
    Can I ask why you want to keep the syncing server local? Is it a security concern? I love MobileMe and would highly recommend it unless there is a need for military-level security.
    Michael

Maybe you are looking for