Can an IDOC without destination be triggered using a LS partner ?

I dont know if it's a problem or there is no other way to accomplish this.
I have an IDOC that is sended nowhere. It's only triggered to parse and map a txt file. So this IDOC points to an ABAP Logical Port (custom function). Everything works fine.
My problem is that I want to be able to create a PO and trigger this IDOC, the only way around was to define a generic vendor for example 9999999 in WE20 I cant use LS (logical system, because it tells me that the destination cant be the same system).
Trought customizing I can redefine this generic vendor  to n amount of vendors. The thing is that I dont want to set up every vendor. What I want is that when a PO is saved trigger the IDOC, no matter what vendor that PO has.
What I tried to do and didnt work:
- Setting ALE. I Cant set up an ALE setting because you cant set up the same logicial system like sender and receiver.
-  In WE20 create a LS parter, so trought customzing I can redifine a LS partner for a specific sales organization or document Type. The IDOC is triggered but it says that was an error because the destination is the same system.
Any can give me any ideas about this ?
thx

Is like u say... there is no point. At first I told them that the best way was implement a BADI and then mapping and save the file. But they WANT Idoc, dont know the real reason... perhaps having a log of the process... to avoid making a table Z, no idea.
The thing is I can trigger the IDOC, and works. I created a Logical Port type ABAP where you put a custom function, this custom function (copy of OWN_FUNCTION). Reads the Idoc, realize the mapping and save the file. This works. The problem is that only works when I use a partner type LI (vendor) and doesnt work when I use LS (logical system). So if only works ofr this type of partner I have to manually via customizing asociate each vendor to one "generic" vendor.
When saving the message in the PO I use EDI type of message class I cant use ALE type.

Similar Messages

  • Does anybody noticed that new iPad can be access without security code when using twice smart cover

    New iPad has the same problem like iPad 2 with smart cover allowing accessing home page without putting security code
    Very serious problem
    Just try to put cover ones and open when security code screen appears don't do anything close cover, open again and you are in home page
    Risky eh?
    Lesio

    Lesio wrote:
    New iPad has the same problem like iPad 2 with smart cover allowing accessing home page without putting security code
    My iPad 2 certainly does not do this with its magnetic cover.  I call BS on this -- there's no way that happens as you've described.

  • I could play brickbreaking on my blackberry now I have i phone 4s i need to know what games can i play without internet connection and free thanks

    I used to be able to play brick breaking on my blackberry, i have now upgraded to an iphone4s what games can i play without internet connection or using up my 3g data as it is limited, thanks

    Have you considered looking for something in the app store?

  • What is the use of Source Partner function

    Dear Experts,
    Can you please explain me the exact use of Source Partner Function in Partner Functions in procedures in Customizing.
    Is it used to propose only sold to party partner function or any partner function from the master data of particular partner function.
    I read SAP standard help but I got confused because of its example. It is as below.
    Source partner function
    Partner function which serves as an alternative source for determining the sold-to party.
    Procedure
    If you don't want the system to propose a partner from the sold-to party master record, enter another partner function here. The system will then propose the sold-to party from the master record of your partner function.
    Example
    If you enter WE (ship-to party) in this field for the function VE (sales employee), when you create the sales document,  it determines the sold-to party from the VE partner function in the ship-to party's master document.
    kindly reply. thanks in advance
    sagar wagh

    Dear Sagar,
    While determining the partner functions you can define that particular partner should be determined from the source partner functions master data.
    For example you want to determine the Freight forwarder and you want to make sure that  this partner function should be proposed as per the ship to party then in customizing for freight forwarder partner function you will maintain the source as ship to party. Due to this customization when you will be creating the sales order for sold to party x and assume that for x you are having two different ship to party at two distinct locations. For these  two locations you have different freight forwarder  providing the services(one for each location). So to determine the right freight forwarder the above mentioned customizing will be required. Otherwise system will propose this partner function as per sold to and that will be same for all ship to.
    Hope this example will help you to understand the usage of source in partner determination.
    Thanks and regards,
    Atul

  • Multi-Mapping in IDOC without using BPM ?

    Hi ,
    Please check ..
    Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regards
    PS

    Solved .. Thx every one .
    Approache Used :
    1. Created mapping  with Change signature on target Message type(idoc) with 1..N Occurence.
    2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
    3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

  • Collecting Idocs without using BPM

    Hi Experts,
    I am working on a sceanrio, where Idocs are coming from sap and we need to generate a single Flat file out of them.
    For this scenario first we need to collect the Idocs and then process them to make a single file output.
    To achieve the same I am using the BPM to first collect the Idocs and make a packet out of them and then processs it to generate a single flat file.
    Can someone please suggest me that, How can we  achieve the same without the BPM.
    If yes, how can we do that?
    Thanks in advance.
    Regards
    Pradeep

    Pradeep ,
    Option 1 : /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
    here you collect them as a file and file is picked up and sent to the target
    Option 2 :
    in WE20 in ERP set idoc package to 50
    in XI sender idoc channel - package to 50
    XI will receive 50 IDOCs at once...
    (courtesy Michal....till then i thought there is no sender idoc adapter )
    Option 3 : collect using BPM.
    Option 4 : This is what i woould suggest....no need of collecting you can send one idoc at a time generate the file.....why do u want to collect?
    Edited by: Tarang Shah on Mar 20, 2009 7:38 AM

  • I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

    i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

    Hi Jay,
    Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
    "Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
    Regards,
    Barry

  • Can a IDOC be used for data exchange from R/3 to CRM

    Hi All,
    First, can a IDOC be used for data exchange from R/3 to CRM
    I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
    To achive this can I use IDOC?
    Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
    Please respond immediately.
    Regards,
    Gopinath

    IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
    Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
    Hope this helps,
    Kai

  • When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

    When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
    Please help!

    It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

  • I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

    I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
    I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • How can i see how many people are using my apple id without changing the password ?

    how can i see how many people are using my apple id without changing because some people have it

    I'm not sure that you can. Why have so many people got your password? So many in fact, that you don't know how many.
    You can see how many computers are authorised to play any songs you have purchased from the iTunes Store, but that isn't quite the same thing.
    Perhaps a better idea would be to change the password and not let anyone else know what it is. That would at least prevent anyone else from changing it and locking you out of your own account.

  • Using Firefox, I used to be able to open a document on a website and look at it without downloading.  Now, I must download a document in order to view it.  How can I change settings so that I can open documents without saving them?

    Using Firefox, I used to be able to open a document on a website, such as a bank statement, and view it without downloading.  Now, I must download and save a document before I can view it.  How can I change settings so that I can open documents without saving them first?

    Do you know what kind of docs they are? Did you upgrade/Update Firefox lately?
    https://addons.mozilla.org/en-US/firefox/addon/pdf-download/
    http://kb2.adobe.com/cps/333/333563.html
    https://addons.mozilla.org/en-US/firefox/addon/open-it-online/

  • After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the   mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

    After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
    Bob

    On the right of the To: field you will see a circled plus sign:
    Click it.

  • Creation of Delivery Using IDOC without reference to order

    Pls suggest is there is any way to create delivery using idoc without reference to order. This is very urgent.

    Hi
    Design the inbound idoc in such a way that it carries all the essential data needed to create a delivery document namely the material number, no of units to be deilvery, delivering plant, storage location, shipping point, warehouse number(if applicable) etc.
    Pass all these details to the function module  RV_DELIVERY_CREATE while creating delivery in VL01N and pass the document type as LO which is delivery document without reference to order.
    But it is advised to have atleast a pseudo order with which we have to create the delivery document.
    Pls reward points.

  • Can i just partition my HD by using boot camp 4.0.1 without install window?

    Can i just partition my HD by using boot camp 4.0.1 without install windows?
    cox i want to use rEFIt to boot up my pendrive to install windows.
    Due to some reason the boot camp 4.0.1 cannnot detect my usb drive (that contained windows 7), so thats why i use the rEFIt to boot from my usb drive

    Yes, you can.
    Let the BootCamp Assistant just make the partition and do not click on "Install Windows"-button.
    The result is a preformatted FAT32-partition on your Mac.
    Stefan

Maybe you are looking for

  • I need to add the Dynamic rows in the Jform

    {color:#800000}*I have used Jform in the net beans... when the submit button i clicked then the dynamic rows should be inserted.. how can do that... i have used DefaulttableModel but in netbeasns it is not supporting i dont know how to add please tel

  • Read out from OBD-II Freematic Emulator using ELM327 with USB and LabView

    Hello. I have an Freematic OBD-II mk2 emulator which simulates diagnostics of a real car. I have connected an ELM327 diagnostic device with USB cable to the emulator and a PC. The connection between emulator, diagnostic device and computer works. Now

  • Keys not working

    My left shift, q, w, and e keys are not working (I am typing this using onscreen keyboard). I had the same problem once before and thought it was a hardware defect until the problem just happened to stop on a random instance of waking my computer fro

  • Crystal report AS ole object into word

    I've been searching the web on using crystal reports as an OLE object inside a word document, but all results have been about using a word document inside a crystal report. I am trying to create a quarterly report document for a  business. This docum

  • Eigrp/igrp default network comand

    what is the default network command used for, is this used in igrp and eigrp ?