Can an iPad be scanned for malware?

Questions:
1) Is it possible for a malicious pdf to infect an iPad, particularly if that pdf were opened by one of the App store's reading apps?
2) Is there such a thing as a scanner for an iPad that could scan it for malware?
3) How would a person know if one's iPad had been compromised by malware? 
The issues mentioned at this link...have they been fixed?
http://theinformativereport.com/2011/07/iphone-ipad-ipod-can-be-infected-by-sing le-pdf-file/

You don't need antivirus or security software as long as you don't Jailbreak your iPad.
Currently there's no known virus affecting iPad.
http://support.apple.com/kb/HT3743

Similar Messages

  • I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

    I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

    Have you been having some problems that make you think you may have malware installed?
    Download and run Etrecheck.  Copy and paste the results into your reply. Etrecheck is a diagnostic tool that was developed by one of the most respected users here (and recommended by Apple Support personnel) in the ASC to help identify the more obvious culprits that can adversely affect a Mac's performance.

  • Can a iPad be setup for tethered shooting with a Nikon dslr

    Can a iPad be setup for tethered shooting with a Nikon Camera

    Not as a standalone solution if you want stuff like live view and all the camera controls on the iPad. If it's just for transferring photos to the iPad for immediate viewing after shooting the Shuttersnitch app comes to mind. Shuttersnitch however requires a WiFi connection that most Nikons don't happen to have. Nikon's wireless dongles for the consumer range of cameras are also somewhat awkward to use whereas the wireless/Ethernet units for the pro range happen to be very expensive. WiFi SD-cards are also a possibility for retrofitting WiFi but they tend to be unreliable, slow and their setup is quite often finicky.
    Another solution would be tethering the camera to a laptop (Win or Mac) through USB and connecting the iPad as a secondary wireless tethering device to the computer. There are programs for Mac and Windows incorporating this feature. I once set this up for a friend who does a lot of studio work but it ended up that he just uses the USB-connected laptop almost exclusively. And unless one would be out for a timelapse shooting already carrying tons of gear not a solution for shooting in the field.
    Last not least but also not exactly inexpensive is the Camranger remote control for Nikon and Canon DSLRs. It connects to the camera through USB and has its own server and WiFi built in which allows to connect to iOS, Android, Mac and Windows (apps for all available by Camranger themselves). Probably the most flexible and comfortable solution especially when considering that it can be used for multiple cameras and will mot likely also work with future cameras. More information can be found at http://www.camranger.com (I'm in no way affiliated with them and personally don't own a Camranger remote so I would advise some more web research on user experiences).

  • Can an iPad purchased only for Wi-Fi be configured for 4G?

    Can an iPad purchased only for Wi-Fi be configured for 4G?

    If you want cellular on a Wi-Fi only model you'd have to buy a mobile hotspot like a MiFi.

  • How do i scan for malware

    There was a new treat for malware out there called alurdon dns changer and supposily cause internet blackout on Monday. Any one aware of this is it a PC treat, should I be concerned? How do I scan my computer for any malware that I could have and not be aware of? Please help...

    You can run the test here:
    http://www.dns-ok.us/

  • Aperture 3 causing iMovie 8 to crash, can't complete a scan for movies

    Anyone else having this issue?
    My A3 library works well in other instances
    - works in Media Browser for other programs like Pages and iWeb
    - successfully integrated two different iPhoto Libraries
    So I'm past the basic myriad installation issues, but now cannot use iMovie. And I can't find any way to prevent iMovie from doing an Aperture library scan! So A3 is depriving me from using iMovie 8.0.5.
    Big problem! Anyone finding a workaround or a solution?

    I have the same problem since the day I used Aperture 3. When I open iMovie 09, it scans for new vids and quit unexpectedly. I gone through the crash log and I believe that this might be a result of "lack of memory" or "too many vids". However, I don't really understand why. I have a MBP with 3.06GHz and 8GB of RAM. Anyway, I found out two stupid methods to get around it. FIrst, you can turn of preview in Aperture's preferences before you open iMovie. This would prevent iMovie from scanning/updating the Aperture library. However, the download side is that you can no longer access Aperture photos from anywhere else, like iTunes,iWeb, iWork etc. So, I recommend you to turn if off when you use iMovie only. The second method is to create a new empty Aperture library and switch to that library every time you use iMovie. Then, switch it back to the normal one after using iMovie......
    However, these two methods seems to be a bit silly and are not directly addressing the problem. So, I hope someone can help me.

  • Can't set up scan for my Officejet J6480

    I have had my printer for seven years and have never used the scanner.  I seem to lost the scan manual.  When I try to scan it says "no scan options, Refer to manual."  I have really needed this function and don't know how to do it.  Can anyone help?

    Hi TimeforTruth,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to scan.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Write me back when you have time and I will be happy to help.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How to I scan for Malware or viruses on my my book pro?

    i was on the web yesterday and I rec'd a page randomly that It says I have a virus. I only had my laptop for 4 months.HOw do I scan my laptop for this?

    You don't need anti-virus software on a Mac
    All they can do is cause more problems then claim that will solve
    Allan

  • How I can make ipad safe browsing for the kids?

    I would like to block adult sites off my kids ipad how can I do that?

    K9 Web Protection Browser:
    https://itunes.apple.com/sg/app/k9-web-protection-browser/id407657840?mt=8

  • Ipad 2 Cannot scan for wireless networks

    Why can't my ipad 2 scan for wireless networks?  Was on airport mode but turned airport mode off.  Turned on wi-fi.  Reset network settings.  Tried turning ipad off and turning it back on.  Keep getting same message.  Could not scan for wireless networks.  Any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Any suggestions for scanning & removing malware?

    My Macbook Pro, running Yosemite, is getting extremely slow. Today when I opened Chrome I saw that I somehow got tricked into downloading one of those things that changes your start page. So who knows what else I've got on here. What's a good tool to scan for malware? I don't know which ones to trust!

    1. Use  free  AdwareMedic to remove adware
        http://www.adwaremedic.com/index.php
       Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
       Once done, quit AdwareMedic.
                 or
       Remove the adware manually by following the “HowTo” from Apple.
       http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
        Turn those off and relaunch Safari.
        Turn those on one by one and test.
    3. Safari > Preferences >  Search > Search Engine :
        Select your preferred   search engine.
    4. Safari > Preferences > General > Homepage:
         Set your Homepage.

  • TS1398 this didn't help me at all. out of the clear clue my iPad can't even scan for wireless networks. even when I type in my home wireless network name. my phone can connect to it but for whatever reason my iPad won't. nothing I've tried works. I'm ****

    believe me I've tried EVERTHING and my iPad still 'can't scan for wireless networks'. it happened all of a sudden and is really really frustrating. I really don't want to have to drive 40 minutes to the nearest 'genius bar'. I'm about ready to break this thing over my knee. I've even tried the frig trick. it worked for about 30 seconds. and then? nothing. any non sarcastic suggestions?

    believe me I've tried EVERTHING and my iPad still 'can't scan for wireless networks'. it happened all of a sudden and is really really frustrating. I really don't want to have to drive 40 minutes to the nearest 'genius bar'. I'm about ready to break this thing over my knee. I've even tried the frig trick. it worked for about 30 seconds. and then? nothing. any non sarcastic suggestions?

  • My iPad 1 can not scan for wireless networks

    My iPad 1 can not scan for wireless networks

    it happends to me sometimes. put the plain mode for a few seconds. you can after go to normal function. normally my iphone start searching for the wifi just after that !

  • Can I scan a link for malware before I click on it?

    For example, if I want to download a PDF, but I'm not familiar with the site, is it possible to scan the file for malware before I click on the link?

    Use antivirus !! Antivirus Scan everything !! Data 1st passes the anti virus security thn comes in system !! So its better option to use a antivirus

  • Recently purchased a scanner which I connect my iPad to.  everything scanned goes into iPhoto. I purchased FileApp Pro to place scanned items into files. I still can't move the scanned items to a file.  Help!

    Scanning items into iPad. Scanned items go directly to iPhoto. Purchased FileApp Pro to create file folders on iPad. Still cannot move items from iPhoto to file folder.  Help?

    Is this a NAS type of setup (of which I know very little)?  Mine is not a response based upon strong technical knowledge but iTunes seems to have problems with those.  Just about everybody has issues with iTunes but you say it is not fit  for the purpose.  What is that?  I bet for 99% of people it does.  Not  everybody has 8TB collections they are trying to use with a RAID structured  external server. iTunes is really a mass consumer piece of software.  Yes, many people have expanded beyond internal drives, but NAS arrangements seem to add levels of complexity beyond a direct external drive that is Mac formatted and at most served by an Apple brand wireless router which I suspect is probably how everything is tested. Anything more is fortuitous in terms of support.  Except that you say the library files are on the external drive too it sounds to me like the server is asleep when you say it cannot find files and then suddenly can when you go to find one.

Maybe you are looking for

  • Making a pdf file from pdf documents in preview

    Many times I get a .pdf from online & when I open it, there are many pages attached with it & I can scroll through it. Is there a way on the macbook to compile pdf pages and make them into a pdf document like this in preview. I've looked & don't see

  • Is there a way to block calls on FaceTime on IOS Mavericks?

    i Keep getting unsolicited calls on my macbook air  is there a way to stop them like blocking them as you can on IOS

  • Upgrade boot drive in MAC PRO Early 2008 to SSD

    Looking to upgrade my boot drive on Mac Pro Early 2008. Possibly with SSD, but wasnt sure of compatibility. Also, is it a huge sacrafice in storage? I'd appreciate any assistance. Thank you!!! Lyle

  • JMenu and JTabbedPane questions

    Hello I got 2 questions : 1) Is it possible to change the icon of JMenu when the mouse cursor is on it ? setRolloverIcon function doesnt work in this case, like it does for the JButton. 2) When I create my application I got 1 JTabbedPane object visib

  • Creating automatic sequential lists in Pages for iOS

    Maybe I'm crazy, but I am having difficulties with creating lists that work in Pages for iOS. I am a teacher, and I have been trying to use my iPad in the classroom more.  I have been trying to make simple multiple-choice review quizzes using Pages.