Can an iphone 4 sim be used for iphone 5

can an iphone 4 sim be used for iphone 5

And it's not possible to cut down an existing SIM or micro-SIM. At least I've never seen a reliable report of anyone successfully doing so. You'll need to get a nano-SIM from your carrier for the iPhone 5.
Regards.

Similar Messages

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

HT204053 can two different apple ids be used for the same imatch

can two different apple ids be used for the same imatch homesharing for music

Welcome to the Apple Community.
No.

Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

Hi mho,
1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
2. see this:-
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
3.If Matlab support TCP/IP, that could be an option.
see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
If both programs running on different systems:-
Most simple and slow - Create two VI's with shared variable on both machines, and use a matlab script to
share data. (this makes matlab some kind of "slave").
More advanced but still relatively slow (Create two VI's with shared variable, on the Matlab machine build the .NET
dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
Create TCP/IP connection between two comps.
There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
I think this link is also helpful for you:-
Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
Anyway All the best.Try....do it.
Thanks as kudos only

Can Oracle Access Manager (OAM) be used for configuring data-level access?

Hi,
Can OAM 10gR3 or 11g be used for configuring data-level access in PS 9.10 and OBI 11g.
This would mean that data-level configuration are stored centrally within OAM database and PS 9.10 pulls these settings for its appropriate Row and ChartField security and OBI 11g queries OAM database tables to populate the initialization blocks during login.
If you have configured this successfuly, please feel free to provide highlevel details/steps about the configuration and any complexities that can pre present.
Thanks.

I recently worked on an interesting implementation that utilized OAM configured against OID in which OAM was configured to control authentication/authorization and then all applications that were serviced by OAM utilized the users login to pass to the database at which point the Oracle database utilized VPD, which was configured against the same OID instance, to leverage user attributes/groups in order to configure fine-grained access control to data within the database. Not sure if this would work for you unless your requirements are similar but it worked very well for this particular implementation as it allowed them to have SSO for their own apps and for BI Publisher which then could pass allong the userid to be leveraged by the database to do fine grained access control.
Edited by: oblix_fan on Jun 23, 2011 8:10 AM

Can ipad air wifi cellular be used for making mobile calls?

Can ipaid air (Wifi+cellular) be used for mobile calling ?

Not 'normal' phone calls as you would with a mobile phone - you can do calls such as with FaceTime or the Skype For iPad app, and you may find other apps in your country's app store that allow you to make calls

Can a write-optimized DSO be used for Delta upload

Hi,
can any one please answer following..
1. can a write optimized DSO be used for Delta upload?
2. Does industry based content is available in BI Content ?
Thanks&Regards
Satya

Hi,
Write-Optimized DataStore does not support the image based delta, it supports request level delta, and you will get brand new delta request for each data load.
Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Write-Optimized Data Store supports request level delta. In order to capture before and after image delta, you must have to post latest request into further targets like Standard DataStore or Infocubes.

Have unlocked 3GS from EUR-can I buy a SIM in USA for Data, phone and text?

Hi -
I live in Germany and am planning a 3 month trip to the US. I have an unlocked iPhone 3Gs that I would like to use while I am in the states.
I'm exhausted and confused looking at the various prepaid phone plans in the US and I am not entirely sure that if I get a SIM card for my iPhone, will it even work. Anyone know?
Has anyone already been down this road and have a recommended prepaid monthly plan that includes unlimited data, texting, and phone calls?
Thanks for your help.

After 10 days in Scandinavia, this is what I have learned:
1.) getting the mini or nano sim has been impossible _ in Sweden, Norway and Denmark the carriers I worked with have the old sim cards that they suggest that you trim down to nano size. The one I tried was still too thick to fit in the sim card drawer on my iphone 5.
2.) Verizon was very cooperative and unlocked my phone before I left the USA.
3.) The Verizon plan may be competitive with plans that cover multiple countries in Europe. The pricing is sufficiently confusing that providers are hard to compare, ie. initial plan / sim card purchase amout, voice, data, text send / receive rates, varying monthly or package amounts of mintes and data allowances.
4.) Keeping cellular data off, using wi-fi has mostly kept cellular data usage low, with a few exceptions resulting from data use for either google or i maps and a probable butt-call or mistaken program left on without wi-fi.
5.) I am still going to check out France's rate, but I won't report more if the story stays the same.
Good luck out there.
Thank you to all that responded. Even though the information did not help resolve the problem it gave us traction.

Nokia Asha 200 - assign SIM to use for contact

Hello, is it possible to assign for each contact which SIM card to use when making call? All I could find was just either set the default SIM for calls or ask every time which card to use. I have SIM where I can make free calls to particular numbers and second SIM for all other calls/sms/data and I don't want to select every time which SIM to use when making a call.

This is not possible.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Is there any network out there that you can buy a data sim card only for a tablet that you can payg and not a mothly contract

I use my iPad at home with wifi for about 98%of the time the other 2% I need to use 3G sim which is not a problem the problem is I cannot find any network that I can buy a payg SIM card unless I renew every 30 days that's £120 a year to use my iPad the amount of times I use it without wifi is so small 2 gb would last me a full year as anybody got any suggestions?

A G5 can run the OS it shipped with up to Leopard if your CPU is big enough (should be being a G5).
For now, You could try this;
Mac OS X: Starting up in Safe Mode
What is Safe BootSafe Mode takes awhile to start, so patience is a virtue here! It may get you going.
Also, it would help to know what your G5 is doing exactly .
DALE

Can a JOIN statement be rewritten using FOR ALL ENTRIES in any case ?

I had a SELECT statement, like:
    select p~key1 t~col3 t~col4 p~col2 p~col3
      into table itab1
      from ( table1 as p left outer join table2 as t
              on p~key1 = t~key1 and t~col2 = someValue ).
Among which, table1 and table2 are fully buffered.
Code Inspector suggests that this statement should be, e.g., rewritten using FOR ALL ENTRIES.
Since FOR ALL ENTRIES is only possible for WHERE conditions of the SELECT statement, which means the internal table right after it is not available for the RESULT clause of the SELECT statement, can the above statement be rewritten? If yes, how?
Thanks!

hi ,
select pkey1 tcol3 tcol4 pcol2 p~col3
      into table itab1
      from ( table1 as p left outer join table2 as t
              on pkey1 = tkey1 and t~col2 = someValue ).
<i>look below code</i>
select * from table2 into table int_tab2 where col2 = someValue.
select key1 col2 col3 into table int_tab1
FOR ALL ENTRIES IN int_tab2
WHERE key = int_tab2-key1.
then use read statements for manipulations
rgds
Anver

Can I SAVE one color to use for the backgrounds of many separate paragraphs?

I have changed the background color of paragraphs in different Chapters for the purpose of making the content within that paragraph stand out.
It’s easy to pick a random color in the Inspector. Open the “Text” tab, click the “More” button, Background Fills, check “Paragraph” and select a color from the available methods.
How can I SAVE one particular color to use for as many separate paragraph backgrounds that I want to make the same color?
I’m using iBooks Author ver. 1.1
As I work on the formatting, I’d like quick & easy access to those one or two special colors that I like.
Using the color wheel I can make a rough guess for each different paragraph, but its not exact.
None of the crayons or the colors in the Pallettes is the color I’m after.
Slider are a pain to try to exactly set each time.
Thanks for any help.

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

Can the PIXMA MG2220 also be used for documents?

I recently purchased a Canon PIXMA MG2220. Can this model also be used for printing, scanning documents as well?

Hello p_lainhart1952! You have nothing to worry about! The PIXMA MG2220 can print and scan both photos and documents. We hope this information is useful to you!

Can I download songs from iTunes used for my 80GB to a shuffle?

I want to know if I buy a shuffle can I download songs from my iTunes for my 80GB iPod? Will it mess anything up trying to download to the two separate devices? Also, can I upload my playlist from my 80GB iPod to another computer and then download from that computer to a shuffle?
Thanks,
tim

In the simplest terms, one PC/Mac, many iPods.
Many PCs/Macs, then you must use manual mode.
The exception being the Shuffles. They only work with one machine at a time.
Scott

Can't install ML. Disk used for time machine

When I choose my machintosh HD drive to install mountain lion says "This disk is used for time machine backups". HELP!!!

Although this may be too late for the OP, here's the answer: If you see a Backups.backupdb folder on your main harddrive, either remove it or rename it. That seems to be the only qualifier for calling a disk a Time Machine Backups disk as far as the installer is concerned.

Can an iphone 4 sim be used for iphone 5

Similar Messages

Maybe you are looking for