Can an LCD from a 1.33GHz PB be used in an 867GHz 12" PB?

I have found an LCD salvaged from a 1.33GHz 12" PB. Will it work in my 867GHz 12" PB?
iMac G5 1.8GHz, PB 12" 867GHz   Mac OS X (10.4.4)   1Gb memory

The guides at http://www.ifixit.com/Guide/ are almost better than the official apple ones the AASPs use. Unfortunately their guide shows how to remove the display but not how to remove the LCD panel from the display.
Did you remove the LCD panel without first removing the display? Doing so is possible but I think you would have a much greater chance of damaging something accidentally.
At the very top of the back of the LCD panel there is a long circuit board that sometimes is covered with white tape/platic and sometimes with clear. Sometimes it has tape saying not to touch. Just don't touch that circuit board and you should be fine. Another issue is when removing the 4 screws holding the silver foil cover on the back of the LCD panel. There are cables for the airport antenae and mic that run around the edge of the panel. I've seen lots of those cables have the plastic worn off of them by the screwdriver when removing/replacing those 4 screws.

Similar Messages

  • How do I set up iMessage so I can send messages from my iPad to my iPhone using the same apple id

    I am trying to set up iMessage so I can send and receive messages on my iphone 5 and my iPad using the same apple id.

    I assume that you want to keep the same Apple ID on both devices for downloads and purchases but you just want to know how you can use Messages on both devices without creating a new Apple ID.
    On one of the two devices ....Settings>Messages>Send and Receive at>You can be reached by iMessage at>add another email address ... and enter another working email address. After you enter the email address and it is verified by Apple, go to the InBox of that email account, read the email from Apple and follow the instructions to complete the verification. Then go back to the settings and remove your Apple ID email address. You will now use that new email address at the contact at email address for messages on that device.
    You can keep your Apple ID email address and use that one on the other device.

  • Can't scan from HP 7520 Printer for iMac using Yosemite 10.10.1

    We have a new iMac that is running on Yosemite 10.10.1.  I am trying to get the scan from printer function to work, but the HP window on the printer didn't register the computer.
    So I downloaded and installed the  driver for OSX 10.10 from the HP website.  The window on the 7520 now lists the computer when I click the scan function, but the scan fails, and the window says the computer is not connected.
    The name on the downloaded file says it is for "Mavericks," so I thought maybe it dosen't work with Yosemite?
    When I open the printer scanning settings on the iMac, it tells me that the "enable scan" function isn't working, and that I need to download the latest software from HP.
    I thought I did that.
    Is there a  way to make this work?
    Thanks.... 
    This question was solved.
    View Solution.

    Welcome to HP Forums
    Im happy to assist you on your issue. 
    Need your help if you can got to this link http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US and download and install the HP Printer Driver 3.0. Then try again if this can fix your problem.
    If the problem still there, need your help below:
       1. How do you conenct your printer(USB, Wireless, LAN)?
       2. Which scan application you are using (HP Scan, Image Capture)?
    I work for HP.
    Although I am employed by HP, I am speaking for myself and not for HP.

  • Can Station Gloabals from different versions of TestStand be used with TestStand 2010?

    I have an older version of TS - ver. 4.01.  I just renewed my subscription and have 2010 now.  Can StationGlobals from one version be copied directly into the cfg directory of a different version?  It appears to work, but I want to make sure there are no underlying problems.

    Hi,
    Seems like you have answered your own question. When TestStand closes it will update the StationGlobals.ini file so if you were going to have any problems you probably would have seen it then.
    Regards
    Ray Farmer

  • Can't print from Firefox 3.6.12. Using Mac OS 10.6.4. No problem w/other apps.

    Not able to print from Firefox. I can print from all other applications, including Safari. 13 others have listed this as a problem on the Support pages, but there has been no response.

    I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.

  • Can you facetime from imac i5 to an ipad2 using the same apple id on both devices?

    i'm pretty sure you can't but before i set up another email address just so i can facetime the ipad2 i thought i'd ask.
    thank you in advance for any answers!

    no you will need to create a new id for one of the devices because you are not able to facetime yourself with the same id for some reason probably has to do with communication issues but the accounts are free so just create a new account on one of them

  • I can hear sounds from my laptop but cant hear using headphone

    i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for  some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I print from my IPAD3 to a printer connected to Airport Express?

    How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

    You cannot.
    The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
    "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
    http://www.apple.com/airportexpress/#wireless-printing
    "AirPrint-enabled printers  connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
    http://support.apple.com/kb/ht4356
    The HP ePrint app also does not provide such functionality:
    Can I print from the HP ePrint mobile app using USB or Bluetooth?
    No. You can only print directly to supported HP printers on a local wireless network.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
    Shlomi

  • Can't Scan from HP Officejet 7580

    Can't scan from my HP Officejet 7580. Use to work just fine, and I have not changed anything I can think of that would affect it. Now I get message "Unexpected Internal Error Has Occurred". I did all the suggested solutions...checked all connections, reinstalled software, rebooted, disconnected/reconnected, and also verified Ditigal Imaging Monitor is active. Nothing helps. 
    Thanks for your help. Also I think I am suppoed to be abel to scan from Photosmart, but don't see a scan option. Thanks for your suggestions on this also. 

    Is the 7580 connected via network? USB?
    Which OS?
    Does the error message indicate the following?
    An unexpected internal error has occurred. Click OK to close the program, and then try one of the following:
    - Restart the program.
    - Restart the PC and then try again.
    - Reinstall the Photo & Imaging Software and try again.
    Try this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-65961-4&lc=en&dlc=en&cc=us&...

  • I can't print wirelessly from my iMac although it is connected to the same network as the printer and I can print fine from my iPad to the same network

    I have downloaded and installed the driver from the HP website for the HP Envy 5530. While I can send documents from my iMac to the printer using a USB cable, it will not print wirelessly. When I tried to install the wireless connection, I got the dialogue box saying "Devise not reachable" and it suggested I check whether the iMac is connected to the wireless network (it is and the signal strength is excellent, Safari runs well) and that I check the printer is connected to the same network (it is). I am able to print items from my iPad wirelessly using the network so I don't understand why the iMac won't recognise the printer wirelessly when everything else works fine.

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Advanced
    and check the box marked
              Include Bonjour in the Bookmarks menu
    if it's not already checked. Then select
              Bookmarks ▹ Bonjour ▹ Name of printer
    A web page served by the printer should open. Does it?

  • Can I buy from different compter?+ PS is acting weird, help?

    Hi! I recently finished my free trial in PS and I now want to buy it. I use photoshop for drawing, editing my drawings, working with layers etc.
    Is the 'photography' pack enough? Do i have full acces to PS with it?
    +
    Im wondering if I have to buy it on the computer im using it or if I can buy it from another computer and then still use it on my own?
    And lastly, I dont know if it was becuase I used the free trial but I often experienced PS flickering and the brush being a bit after my strokes. Will this stil be going on If I buy the real deal? Im using a Mac Retina OS X Yosemite, so there shouldn't be a problem using PS on this computer, right?

    Cloud Plans https://creative.adobe.com/plans
    -Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
    -Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)

  • How can I print from my ipad2 to a Kodak 5250 ESP printer?

    How can I print from my iPad 2 to a Kodak 5250 printer?

    You cannot.
    The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
    "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
    http://www.apple.com/airportexpress/#wireless-printing
    "AirPrint-enabled printers  connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
    http://support.apple.com/kb/ht4356
    The HP ePrint app also does not provide such functionality:
    Can I print from the HP ePrint mobile app using USB or Bluetooth?
    No. You can only print directly to supported HP printers on a local wireless network.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
    Shlomi

  • Hi everybody, I have 3 questions, first: Can we buy original LCD from Apple? Second: Where can my earphone can be repair(iPhone 4s) ? third: Where can my mute button can be repair ? Thanks for your answer !

    Hi everybody, I have 3 questions, first: Can we buy original LCD from Apple? Second: Where can my earphone can be repair(iPhone 4s) ? third: Where can my mute button can be repair ? Thanks for your answer !

    If out of warranty and mechanically inclined, you can get parts and how-to at www.ifixit.com.
    The 4 Series are relatively easy to open and service, I've replaced batteries on two 4s.  The 5 Series are a nightmare.

  • Can I print from my iPad 3 to brother LCD-970bk printer

    Can I print from my ipad3 to a brother lc970bk printer

    Consider getting a program called Airprint Activator.
    http://netputing.com/airprintactivator/airprint-activator-v3-0/

  • Can't capture from my cannon video camera to Final Cut or iMovie.

    Hi. I can't capture from my cannon video camera to FInal Cut or iMovie. ANy help would be greatly appreciated. I don't think my iMac is recognizing the camera. I was told I don't need a firewire, that USB would work if I'm just capturing. If I need a firewire what kind (the one I was sold didn't fit). I'm getting an "unable to locate external device message". Not sure of next steps to try. Thanks.
    Computer= iMac 21.5-inch: 2.5GHz
                2.5GHzQuad-Core Intel Core i5
                1920 x 1080resolution
                4GB (two 2GB)memory
                500GB harddrive1
                            AMDRadeon HD 6750M with 512MB
    Processorand Memory -
    Powered by a quad-core Intel Core i5 or i7 processor and DDR3memory.
    Connectionsand Expansion
    SuperDrive, SDXC card slot, audio in, audio out, USB 2.0,FireWire 800, Thunderbolt, Gigabit Ethernet.
    Video camera = Canon Vixia HV40                                                                                                                                                
    Standard  Definition or High Definition 
    High  Definition 
    Power  Consumption 
    4.3 W 
    Television  System 
    NTSC 
    Video  Recording system 
    MPEG2 
    Image  Sensor 
    1/2.7-inch  CMOS, RGB Primary Color Filter 
    Total  Pixels 
    Approx.  2.96 Megapixels 
    Effective  Pixels 
    Tape:  HD/DV (16:9) mode: Approx 2.07 Megapixels (1920x1080) DV  (4:3) mode: Approx 1.55 Megapixels (1440 x 1080) Card:  (16:9) mode: Approx. 2.07 Megapixels (1920 x 1080), (4:3) mode: Approx. 2.76  Megapixels (1440 x 1080) 
    Tape  Format 
    HDV /  DV 
    Maximum  recording Time 
    SP: 80  minutes, HDV, DV LP: 120  minutes DV 
    Lens 
    Zoom  Ratio 10x Optical  / 200x Digital Focal  Length f=6.1-61mm  (35mm equivalent: 43.6 - 436mm) Zoom  Speed Variable /  3 Fixed Zoom Speeds Max.  F/Stop  f/1.8-3.0mm (when tapes are used) 
    Focusing  System 
    Instant  AF, TTL (through the lens) 
    Manual  Exposure 
    Yes 
    Programmed  AE 
    Auto,  Program, Av, Tv, CINE, Portrait, Sports, Night, Snow, Beach, Sunset,  Spotlight, Fireworks 
    Max  Shutter Speed 
    Movie:  1/2000, Still image: 1/500 
    Auto  Date/Time 
    Yes 
    Record  Search/Review 
    Yes 
    Focusing  System 
    10 mm  (wide) / 1m (tele) 
    White  Balance 
    Auto,  Daylight, Shade, Cloudy, Tungsten, Fluorescent, Fluorescent H, Manual 
    Frame  Rate 
    60i,  Native 24p Progressive (records at 24p), 24p Progressive (records at 60i),  30p Progressive (records at 60i) 
    Minimum  Illumination 
    0.2 lx  (Night Mode) 
    Image  Stabilization 
    SuperRange  Optical (lens shift) 
    Filter  Diameter 
    43mm 
    Viewfinder 
    Widescreen  0.27-inch Color Viewfinder / (Approx. 123,000 dots) 
    LCD  Screen 
    2.7-inch  Widescreen LCD (Approx. 211,000 dots) 
    Recording  Media 
    High  Definition Mini DV (recommended) (63 min) or MiniDV cassette 
    USB  Terminal 
    USB 2.0  Full Speed 
    Video  Terminal 
    component  (output), composite (output) 
    Audio 
    DV: 16  bit (2ch) 48 kHz 12 bit (4ch) 32 kHz 4ch synchronous recording not possible  HDV: MPEG1 Audio Layer II (2 ch) (4-channel playback of tapes containing  4-channel recordings possible) 
    Accessory  Shoe 
    Advanced 
    Supplied  Video Editing Software 
    None 
    HDMI Terminal 
    HDMI  Type A (19 pins) Connector (output) 
    Microphone  Terminal 
    3.5 mm  stereo mini-jack 
    AV Mini  Terminal/Headphone Terminal 
    3.5 mm  4 pole mini-jack (video/audio input and output) 
    Dimensions 
    (W X H  X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138mm) 
    Weight  (not including lens and battery pack) 
    1.2  lbs. (535g) 
    Weight 
    1.4  lbs. (615g) 

    Forget USB for capturing from tape. USB is only for stills from a Tape Based camera.
    You require a firewire cable.
    The camera connection end will be four pin and the Mac is nine pin to the 800 port.
    Ask for a 9 to 4 pin firewire cable. Sounds like you have the wrong one as they can also be 4 to 4 or 4 to 6 pin!!
    Also you will need the correct Easy Setup in FCE so FCE talk to the camera, exactly which one depends on what type of footage is being sent to FCE from the camera during capture.
    Al

Maybe you are looking for

  • Home wireless network keeps "timing out." Help!

    I currently have an eMac with a wired connection to an AirPort Extreme base station that creates a wireless network in my home with Time Warner Road Runner. I also have an Airport Express that acts as a relay station. For some reason lately, the wire

  • CS4 Premiere (and Encore) crash on opening with blue screen

    I have been having a terrible time with CS4 Premiere Pro crashes over the last month or so.  Initially PP would just disappear from the screen as it was opening up, and if it didn't crash it was quite often after the Matrox RT.X2 logo came up after s

  • Is it possible to use certutil to export multiple certificates from a local client machine store, to a .p7b file?

    Is it possible to use certutil to export multiple certificates from a local client machine store, to a .p7b file? Scenario: We have a few legacy certificates based on some legacy templates (2012 R2). Some belong to an old SubCA (2008 R2). I've can ma

  • Stuck in Set up Email when upgrading to IOS 5

    I started around 4pm this afternoon.  I got to the Set-up Email part and the stupid little circle just goes round and round and round...  I attempted to "Start Over", but that just added and hour to the process and got me right back. The email accoun

  • Document Composer ES 2.5: PDF Plugin Problem?

    Hi, I got a screenshot from a colleague of me showing his UI of the Document Composer. I have never seen such a behaviour of the PDF plugin part It looks like that the plugin is not loaded correctly, but I have never seen such a "cross" for it. Any i