Can an ODSs DB Tablespace Assignment be Changed AFTER Activation.

Is it possible to change the DB Tablespace Assignment for an ODS once that ODS has been activated and data loaded to it ? I know this can be done for an InfoCube. I realize that all previously loaded data would have to be deleted, and then reloaded after the reassignment.
Thanks for your input !

We have some of our large ODS's in separate tablespaces. The creation predates my involvement so I'm not sure whether they were created in a separate tablespace originally or not. I would doubt they were just because I don' think during the originally setup, anyone had an idea of data volumes for any particular ODS to have made the decision to put it in a separate tablespace.
The DBAs should be able to move the table to the new tablespace. Question is what needs to happen on the SAP DDIC side. You need to be able to change the tablespace settings for the ODS but not cause any sort of impact to the table.
When I get back to the office I'll check a few things.
Message was edited by: Pizzaman
BR*SPACE should allow you to move the reorg the table to another tablespace. SAPDBA for older systems.
http://oraclesvca2.oracle.com/owsf_2003/40041_Klokkers.ppt
SE14 allows you to change the Technical Settings for the tablespace - won't alter the space, but will allow you to make sure the SAP DDIC settings agree with where the table actually is.

Similar Messages

IPhone stolen, can I keep it on iCloud account even after activating new phone?

So my phone was stolen a little while ago and they took my iphone along with a bunch of other stuff. What I'm wondering is if it's possible to keep the stolen iphone active on my iCloud list so I'm alerted if they turn it on, even after activating a new phone. I would just cut my losses but I want to get all my IDs and cards back if there's even a slim chance.
What happens if I activate a new phone using the same number and Apple ID? Will the old phone still be there, or will it disappear from the iCloud devices? I was thinking of setting it to "wipe" but I think just setting it to "Lost Mode" will give me a slim chance if they turn it on again. The phone does have a password and I bet they know they were being tracked so I'd be surprised if they turned it on, but you never know. the police case is still active, but I need a new phone ASAP so I can't just wait to see if anything happens with the old one.

No. The only way to retain them on the iPod after they have been deleted from the computer is to not sync. YOu also can;t add new one .

System landscape changes after activating charm

I need to change the system landscape on a maintenance project. I need to add an additional QA client to the project landscape. I have open change requests that I can not move to production yet so I can not complete the project. I have created another project and tested forcing the cycle closed and creating a new cycle, but the change docs are associated to the old cycle number. I have followed the steps in the charm FAQ for closing inconsistent project cycles (note 933705), but I couldnu2019t re-associate the change docs with the new cycle or project. I would think the need to change the landscape when you have open change docs would come up fairly often. If someone has successfully done this would you please provide the steps?
Thanks
Jeff

Hi Jeff,
ChaRM supports the logical component changes and also with modifiable transport orders.
Please take a look at the following link:
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
6. Changes in the logical components of a project where Charm is already activated
8. Completing a task list
A task list can be closed even with modifiable transport orders according to note 1071412 "Completing a task plan with changeable transport requests".
Then when you create a new cycle, the system automatically assigns these processes and objects to the new cycle. This is also logged in application log. To display the log entries, you can use transaction /TMWFLOW/MAINTINST. Navigate to the tab with your project type (usually the maintenance project) and choose 'Create...' and 'Execute'. Then select the required project and choose 'Messages at Time of Creation'.
Other related notes: 1354638, 1344191 and 1158885.
Best Regards
Fernando

Can my wife pay for her own purchases after activating family sharing?

How can I set my wife's account on family sharing to make she pay for her purchases with her own credit card?

If you are organizer, which I assume is the reason why you and not your wife is here, asking question - you can't do that, but what you can do is ask your wife to place itunes gift card with balance on her account and according to Apple that balance is going to be used first.

Service Requests - Assignment Block "Change History"

In SAP CRM 7.0 for the Service Requests.
How can I add a new field ("Z" fields) in the assignment block "Change History" and this new field has an historial (new value and old value)?
Is in customizing or views or class implementation?
Thanks for your respond.
Best regards,
Douglas

Hi Vishal
I'll explain the requirement:
When we modify an extended field of Assignment Block "Service Request Details" (Component: SRQM_INCIDENT_H - view: IncidentHeaderEF) its change doesn't appear in the Assignment Block "Change History" (Component: BTCHIST - view: HdrOVWindow), we need to appear this change in the Assignment Block "Change History" with old and new value as well as "changed by".
Thanks for your respond.
Best regards,
Douglas

Can this inspection lot type 06 be changed

Hi! all
could you please suggest me on this
this is related to QM
When using the standard SAP customer returns process an inspection lot is automatically created. Can this inspection lot type 06 be changed to allow stock to transferred to u201CUnrestrictedu201D or u201CBlockedu201D stock in a similar way as inspection lot type 01.
regards
Vikas

Hi,
Go to MM02, QM view, here deactivate inspection Type "06" and activate Inspection Type "05" i.e. Inspection for other goods receipt
And then go to Schedule line category of Return sales (For e.g. DN ) in VOV6 and assign the movement type as 655 instead of 653 and then run the complete new cycle and check.

Find undo tablespace assignment in RAC

Hi Experts,
We have 6 nodes 10GR2 rac database. It seems that does not assign each instance order with undo tbs.
How can I find each instance assigned undo tablespace?
Thanks very much!
JIm

Handle:      user589812
Status Level:      Newbie
Registered:      Aug 13, 2007
Total Posts:      829
Total Questions:      366 (338 unresolved)
so many questions & so few answers.
also Do i have a way to drop a datafile in undo tablesapce?UNDO is no different than any other tablespace.

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

How to change the default search engine? I accidentaly change it from google to yahoo, and I can't get it back. I changed my homepage too, but it isn't solved. Thanks

dear, there.
how to change the default search engine? I accidentaly change it from google to yahoo, and I can't get it back. I changed my homepage to google too, but it isn't solved. Thanks

Clarification:
I believe now you potentially lose all extensions, plug-ins when you use the new reset function, but you will let me know.
If that is the case, your find corrupt file method maybe better. However, I reviewed the two help articles and there appear to be more files than just the delete search.json file and a possible search.sqlite file in the Firefox Profile Folder. I am confused. Then I have to find the folders. I think help articles mentioned how to find the profile containing the files, but not sure.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

How can I find my password for iTunes? Forgot it and can't see how to restore or change

How can I find my password for iTunes? Forgot it and can't see how to restore or change it. It is not the same as the apple id password - or so my iPhone iTunes says - Help

I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore so I can't have the password sent there. To sum it up, iCloud has an old email for the account log-in. I don't remember the password for the old email. I have Find My iPad activated so the iCloud account cannot be deleted. And I am already logged out of iTunes & App Store.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

I can't log into iCloud because I changed my appleid and it hasnt updated on my phone

I'm trying to log into an old iPhone but I've changed my AppleID since I've used it. So when i try to log into my iCloud account it still has the email address to my old account name and it wont let me change it to the new one. It's very frustrating. I can't restore the phone unless I turn off Find My iPhone but I cant because I cant log into the iCloud account...

Welcome to the Apple community.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can i add a new user and change user'password with javamail?

how can i add a new user and change user'password from a mailserver with javamail?
email:[email protected]

Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
if it is linux...u have to use some shell programming\
bye for now let me know if this guides you or if you need some more stuff.
bye

Can an ODSs DB Tablespace Assignment be Changed AFTER Activation.

Similar Messages

Maybe you are looking for