Can any 1 help reg Post system refersh activity
Hi
can any one help me regarding post system refersh activity?
Regards,
Siva
Hi,
license the machine,run se06,check the stms config,reasign logical systems,number ranges of the transport requests,recreate fax and mailing list,check printers,ditribution models,RFC,mailing list...
Regards
Umesh
Similar Messages
-
Hi
Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help meDear Srikanth,
I am not sure, if my answer will satisfy you, but anyway I will try:
Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
Well, to solve situation you have few ways:
1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
Best Regards
Arnost -
I am trying to find a driver to syn mini mac to Lexmark x9350. Can any body help please?
I am trying to find a driver to syn mini mac to Lexmark x9350. Can any body help please?
Humm... the only Lexmark X9300 download that I see is for SL 10.6...?
Lexmark United States Support & Downloads for Lexmark X9350
I'm not sure exactly what "component missing" means, but it sounds more like a missing driver than a missing printer part?
To be honest, I think your going to have to remove all previous Lexmark drivers and software from your system, temporarily connect the printer up USB and use the system updater as per the link that I posted in my first reply.
Lexmark United States
You might also check to see if you have a failed print job..?
Open the Print & Fax Preferences and select Open Print Queue...
Pause the Printer using the green button.
Select (highlight) each of the jobs in Status and Delete them all.
Resume Printer using the green button and send it a new job. -
Can any one help me to code a browser
hi ,
I am Anil, I am doing an application in java. it needs a browser as IE or Morzilla . i tried to implement the browser using jdic.
i add jdic.jar files as a external jar file and added it to my project. when i run the program in eclipse it works fine. when i want to create a jar file to my application it shows the follwing error..
when i click on that jar file , it shows a Java Virtual Machine Launcher dialog box and in that dialog box it shows error Could not Find the main class. Program will exit ..
this is the error.
can any one help me to over come the error or any alternative method to implement a browser..DarrylBurke wrote:
Corss poster!
[http://www.java-forums.org/advanced-java/30298-how-write-job-aggregator-java-j2ee.html]
dbNot anymore, Fubarable has axed that thread. -
Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.
Andrea...
You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
On the iPad tap Settings > General > Reset > Reset Network Settings
Then restart the iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you still can't download apps, the problem may be your Wi-Fi connection > iOS: Troubleshooting Wi-Fi networks and connections -
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times. -
Hi i am unable to send mail from yahoo mail id.can any one help on this?
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="pop3.yahoo.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames = {"c:\\gopi.txt"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
while compliling this one its compiled succesfully but i am getting exception at run time like..D:\mail>java MailClient
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/activation/re
gistries/MailcapFile
at javax.activation.MailcapCommandMap.loadFile(MailcapCommandMap.java:275)
at javax.activation.MailcapCommandMap.<init>(MailcapCommandMap.java:128)
at javax.activation.CommandMap.getDefaultCommandMap(CommandMap.java:44)
at javax.activation.DataHandler.getCommandMap(DataHandler.java:136)
at javax.activation.DataHandler.getDataContentHandler(DataHandler.java:568)
at javax.activation.DataHandler.getContent(DataHandler.java:501)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1253)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at MailClient.sendMail(MailClient.java:35)
at MailClient.main(MailClient.java:72)
can any one help on this....plz
thanks in advance
Edited by: Konapalli.Gopi on May 20, 2010 5:42 PMSomething's wrong with your CLASSPATH.
If you're not using JDK 6, you need to include activation.jar in your CLASSPATH.
If you've got any other jar files that define the javax.mail.* or javax.activation.* classes
in your CLASSPATH (such as javaee.jar or j2ee.jar), remove them. -
Hey, I had met a problem with installation. Can any one help me?
Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ThanksRe: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems! -
My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.
Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not. -
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am maqsood from Karachi Pakistan
Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-) -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Can any one help me to sign a application ??
can any one help me to sign rotate me for n73
But for your own security, please don't publish you IMEI on this or any other public web site.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button. -
Can any one help to correct my errors.I tried to run this program but I coudn"t.
Thanks in advance.
import javagently.*;
import java.io.*;
import java.util.*;
class PatientMenu {
/* Example that uses the JG3 Display class to set up
a simple menu driven program.
Caution pressing close on ANY display ends the program!!!
public static void main(String[] args) {
Display menu=new Display("Main menu");
boolean running=true;
menu.prompt("option",0);
do {
menu.ready("select option, then press ready bar");
int sel=menu.getInt("option");
menu.hide(); // this removes the main menu from the screen
switch(sel) {
case 1: option1(); break;
default: running=false; // any entry other than 1 or 2 will end program
} // of switch
menu.show(); // get main menu window back
} while(running);
menu.println("End of program, please finish by pressing close");
void displayMenu(){
System.out.println("Patient List Menu");
Sustem.out.print();
Sustem.out.print("1) Add a patient to the list");
Sustem.out.print("2) Treat patient from the list);
Sustem.out.print("3) Show all patients in the list(in order of priority)")
Sustem.out.print("4) Update truma level);
Sustem.out.print("5) Show incremental time);
} // of mainTHANK YOU FOR YOUR REPLY. BELOW IS YOUR MY REPLY.
-
I have a early 2008 macbook 13 inch and dont have the pass word can any one help?
I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite - System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Maybe you are looking for
-
Do i need to hook my computer to my apple tv
do i need to hook my computer to my apple tv
-
Text Not Displaying in Design Mode
About mid-way through creating my first Muse website, the body text of my pages quit being displayed while in Design mode. The text boxes are all still there and I can select the text, change the text, etc. but can't see what I am doing. When I hit
-
Hello there, I need some help, since I handle post production work, I don't really have a handle on flash. I have all the files for my site. I need advice on what needs to be done to make my site stick out from the crowd. I can pay via paypal. I hope
-
my ipod classic is stuck in the 'this game cannot be launched'mode.as a result i cannot use it for any think.it is not full. thanks for your help.
-
Questions concerning ST Simple Transformations
I got some questions concerning Simple Transformations: 1.) When editing a simple transformation, how to insert comments? In pure ABAP, a comment line must have as asterisk in the first column... 2.) I use <tt:loop>...</tt:loop> and want to use the i