Can any 3rd party sensors be used with this system?

I have several wireless door sensors currently in use with my ADT system that I plan to cancel soon. Is there a way to use these with the gateway?
Can any 3rd party IP camera be used with the gateway, or only the ones provided on your site?
Supported or not, just wondering if theses items will work. Thanx ~

Zwave is a Propiertary standard protocol.
Both ADT And Verizon are offering us off the shelf zwave devices.
So we "should" have been able to use any zwave devices.
But no...
it appears that Verizon has decided to lock out anything they haven't sold us directly
(lock out from their gateway).

Similar Messages

  • Can any 3rd party router piggyback to the black sky hub?

    Hi all were having the sky fibre unlimited installed next week and today we have received the new Sky hub SR102 the black one in order to use the fibre optic from next week.  I have heard some bad and good reviews about this hub but one common concern i hear of is the wifi recetpion. My dad however uses the same SR102 and gets great reception from it. I have heard however that if i am to face this problem (hopefully not) i cna always buy another router and piggyback it to the sky hub via ethernet to boost the wifi coverage received. Does anyone know if i can use any router to do this with or does it have to have something specific with it being sky fibre im going to be used?. Any help would be greatly appreciated thank you very much.

    If you was to go down the route of having another router then you will need one that needs an Access Point mode. What this does is turn off the DHCP function (which assigns your devices an IP) and allows devices to connect into it, whilst the SR102 serves the IP addresses. What I would recommend is to invest in a Power over Ethernet Wireless Extender.Plug one adapter into the mains next to your SR102 and connect it to your router via ethernet. Plug the wireless adapter into the mains elsewhere (assuming where wireless is poor) and follow the instructions to connect over the power lines.  Google "PoE Wireless" or "power line wireless extender"

  • Where to place 3rd party jars for use with SSPI

    I have a question regarding the SSPI. Our custom sspi uses some third party jars
    for things such as persistence and caching. Our problem is that the sspi jar
    file that is placed in the mbeantypes directory relies on some of these jars,
    therefore they must be available at startup. However since we will be installing
    the sspi on several different Weblogic 8 servers I do not want to modify each
    startup script to explicitly include each jar in the classpath.
    Is there a place or a best practice that we can use to allow the sspi find these
    libraries? Note: we tried the JAVA_HOME/jre/lib/ext directory which does not
    seem to work.

    You will need to have them in the classpath
    Tony
    "tobin" <[email protected]> wrote in message
    news:40882da6$[email protected]..
    >
    I have a question regarding the SSPI. Our custom sspi uses some thirdparty jars
    for things such as persistence and caching. Our problem is that the sspijar
    file that is placed in the mbeantypes directory relies on some of thesejars,
    therefore they must be available at startup. However since we will beinstalling
    the sspi on several different Weblogic 8 servers I do not want to modifyeach
    startup script to explicitly include each jar in the classpath.
    Is there a place or a best practice that we can use to allow the sspi findthese
    libraries? Note: we tried the JAVA_HOME/jre/lib/ext directory which doesnot
    seem to work.

  • Can a list of columns be used with this?

    I'm curious if there is a way to pass in a list of column names and possibly table names too instead of just using one of each in the code below.  Thanks in advance for any help!
    IF EXISTS(select * from sys.columns
    where Name = N'myColumn' and Object_ID = Object_ID(N'myTable'))
    begin
    -- Column Exists
    PRINT N'The column exists';
    end
    ELSE
    -- Column doesn't exist
    PRINT N'The column doesn''t exist';
    GO

    Hello "new to sql server"
    Here is my suggestion for your requirement
    declare @list as table (
    tablename sysname,
    columname sysname
    insert into @list select N'Employee', 'first'
    insert into @list select N'Employee', 'username'
    insert into @list select N'Employee', 'last'
    insert into @list select N'Countries', 'Code'
    insert into @list select N'items', 'Id'
    insert into @list select N'items', 'State'
    insert into @list select N'Books', 'Author'
    select
    u.tablename,
    case when t.object_id is null
    then u.tablename + ' table does not exist'
    else
    case when c.object_id is null
    then u.columname + ' column does not exist in table ' + u.tablename
    else
    u.columname + ' exists in table ' + u.tablename
    end
    end
    from @list u
    left join sys.tables t on u.tablename = t.name
    left join sys.columns c on t.object_id = c.object_id and u.columname = c.name
    Please note that on your SQL Server version sys.tables might be used as systables, and similar case for sys.columns table
     I hope this SELECT script can help you for the solution,
    SQL Server, SQL Server 2012 Denali and T-SQL Tutorials

  • Any 3rd party utilities that fix full screen mode for multi-monitor users?

    I am a multi-monitor user.  As multi-monitor users know, full screen mode is basically useless since if you try to go full screen on one monitor, it causes the other monitor to go blank and become unusable (at least with most programs).  Are there any 3rd party utitilities or fixes for this?
    Thanks

    Spaces, which is what this functionality stems from, was limited in that it used your entire setup and switched all of the screens over; space to space. I never used spaces because I always had multiple monitors and I was always working with multiple apps simultaneously that I wanted to be able to reference while working on the others.
    Now they call Spaces, "mission control" and changed the appearance of it, but the functionality remained the same, each workstation comprised all of your monitors, and would switch over all of them when switching to a new "Desktop".
    Fullscreen apps wrongly assumes that it can take the functionality of the afformentioned MS/Spaces and use it for one app, negating the whole idea of why someone would have multiple screens (real estate to work with other applications).
    If they stop considering multiple monitors as one Workspace, they can then make it so they are asynchronous "tablets" instead of one conjoined entity.
    So, you say people have been asking about this for 2 years, I've been asking for this for 5!
    The issue here is, the only answer is to not use it. Making Mission Control and Fullscreen apps completely ignored by people like us, where I could be using both functions to glide around my work station and three monitors, mixing and matching which apps I want to be viewed on each separate monitor, to perform one single task; together.
    It would actually reward people who wanted to utilize Thunderbolt technology and have more then one monitor.
    There is no telling why apple chose to push out something that would only support the casual user, with one display, but the only direct way to let apple know that we feel limited by the OS is to send feedback. Even though it seems that we are powerless in this situation, I hope that they do consider how to make this function better.
    </rant>

  • Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

    Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
    I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
    I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
    I tried every possible mail server settings including the following:
    IMAP information for the incoming mail server
    Server name: imap.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS instead.
    Port: 993
    Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
    Password: Your iCloud password
    SMTP information for the outgoing mail server
    Server name: smtp.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS instead.
    Port: 587
    SMTP Authentication Required: Yes
    Username: Your full iCloud email address (for example, [email protected], not emilyparker)
    Password: Your iCloud password

    Those are the correct settings, and they work with any email client that supports Imap.
    Try again.

  • I have a PVR which supports DLNA connected to my home network.  I want to access files on my MacBook from the PVR.  I understand that my MacBook doesn't support DLNA. Is there any 3rd party  software that I can install on my MacBook to provide DLNA?

    Hi,
    Can anyone help me please.
    I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi. 
    I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system.  I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
    Is there any 3rd party  software that I can install on my MacBook to provide DLNA server?
    Thanks,

    My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

  • Is any 3rd party hardware/platforms  required to enable communi with SAP?

    Hi Gurus,
    What server side hardware/platforms are required to enable communication with SAP mobile devices? What would be a typical production setup? Would there be any 3rd party components here that would require licensing?
    Thanks in Advance,
    Dharani

    Hi,
    if you want to communicate with SAP Mobile devices - you need a SAP Netweaver installation in Mobile UsageMode. This is called the middleware system. It is not recommended to have this setup onn your Backend system but to have a dedicated server for it - cause of Workload, performance and monitoring.
    If you run MI client on a PDA - then you need to install NSICom Creme as Java runtie on PDA - but the license is already included in SAP MI lizensing cost.
    If you have to support larger Datasets, then you might need to install DB2e as persistence layer. This causes an additional licensing you need to pay to IBM - I think via SAP, but well, at the end you need to pay something on top if you run DB2e. The normal used persistence is free of charge. It is called FileIO up to MI7.0, with MI7.1 it is called MinDB.
    So all you really need, is a dedicated Netweaver Mobile Box.
    Hope that helps!
    - oh I have seen - check your other post on that topic as well .--- this post here is for occasionally connected apps - this other post talks about MobileOnline as well---
    Regards,
    Oliver
    Edited by: Oliver Kaluscha on May 23, 2008 3:47 PM

  • Any 3rd party software to recover video taken with iPad and not yet backed up

    I accidently deleted a video clip, taken with the iPad 3. iPad has not been backed up since as this video was shot yesterday and I was out of town and unable to back up iPad yet. Are there any 3rd party solutions to recover that file? I've turned off the iPad to prevent over righting.
    I think it's unbelievable that it could be so easy to possibly permanently delete content from such an advanced device
    Ron

    Maybe:
    Recover iPod - iPod Data Recovery Software for Windows & Mac OS X
    How To: Recover iPhone app data after a clean restore (OSX) | iSource (Mac only)
    Recover files from iPod Touch | Restore data iPod | iPod touch undelete, unformat
    iPhone Recovery Stick - recover deleted text messages & more

  • Can u please suggest me any 3rd party service center in new delhi.

    can u please suggest me any 3rd party service center in new delhi.

    You are not addressing Apple here, we are users just like yourself, therefore unless someone from India is reading this and can recommend one, we would not know of any reputable third party service centres, I would advise you google them.

  • Are there any 3rd party tools which provide Microsoft Azure IaaS diagnostics?

    Are there any 3rd party tools currently, which can be used for giving detailed diagnostics Information about the IaaS environment (like on VM's, Virtual Network etc.) in a detailed report format periodically? Please note that I am looking for any such tools
    around IaaS environment diagnostics here, and not about Application diagnostics.

    Hi Bahree,
    Microsoft does not suggest  a specific third-party product. However, we do use them, and see lots of other customers use them.
    Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch , You may browse to these site and few others to learn more, and chat with their folks directly on how they support Windows Azure.
    I see that Microsoft has published a self-help diagnostic package for running Windows-based virtual machines (VMs) in Azure IaaS and this this diagnostic package does not require opening a Support Request with
    Microsoft
    This package helps to diagnose and resolve common issues on running Windows-based VMs in Azure IaaS
    We may download the diagnostic package from Microsoft's Support Diagnostics Self-Help Portal:
    https://home.diagnostics.support.microsoft.com/SelfHelp?knowledgebaseArticleFilter=2976864
    You might want to see
    Microsoft Azure Virtual Machine Monitoring with Azure Diagnostics Extension
    Regards,
    Shirisha Paderu

  • Are there any 3rd party LabVIEW and/or TestStand code analysis tools

    I am looking for any 3rd party tools to analyze LabVIEW and/or TestStand code. Looking for tools that will check for memory leaks, timing, and any other code performance problems. I know LabVIEW has the profiler tool, but I am looking for 3rd party tools.

    Hi wbolton,
    I am personally not aware of any 3rd party tools that do the same thing as the Profiler, but I can say that if you'd like to analyze a .VI or .seq file, the most straightforward way to do so would be with the appropriate National Instruments software.
    Regards,
    Dan Richards
    Dan Richards
    Certified LabVIEW Developer

  • Are there any 3rd Party Cloud Application Readiness Assessment tools in the market today?

    I have couple of interrelated questions here:
    1
    Are there any 3rd party tools, which do Cloud Readiness  Assessments for on-premises Applications. I am looking for names of any such tools, if they exist, which thoroughly analyse on-premises applications, and generate detailed reports on whether the
    application is ready for moving to the cloud (and why?), or if it needs some changes before moving (which changes?), or if the application needs major changes (which?) or cannot be move to cloud in its present form. The cloud here could be Azure (1st pref)
    or AWS (2nd pref).
    2
    From the tools named in response to above questions, which are the ones which can be used for doing applications assessments for a large number of on-premises apps in most efficient way? Do such tools actually exist? Imagine scenario that an enterprise customer
    comes to me and asks that they want to check the cloud readiness for 3000 applications in shortest possible time - What tool will you recommend for such massive assessments?
    Thanks, LH

    Hi,
    I would suggest you to check this Microsoft Cloud Self Assessment Tool.
    For more information on this, refer this link:
    http://blogs.technet.com/b/schadinio/archive/2012/07/09/microsoft-cloud-self-assessment-tool.aspx
    Regards,
    Azam Khan

  • Are there any 3rd Party metric tools that does metrics on who access pages?

    Hello Gurus,
    Are there any 3rd Party metric tools that does metrics on who access iviews?
    I am inquiring on a tool that we can determine how useful the iview(s) to
    the users community.
    I understand that SAP has an ADC project.  But we are also interested if there
    are ant 3rd Party tool that can aggregate the ADC flat file contents and summarize
    the data.  Additionally, if the 3rd Party has out-of-the box reportable iviews.
    We are also open to suggestions of 3rd Party tools that can capture user's iview
    metrics without using ADC flat files.
    And finally, my wish list: is there is a 3rd party tool that can capture when users'
    clicks in the iview.  That is the ultimate metric to absolutely know if the iview is
    useful to the user community.
    Thanks,
    Steve

    Hi,
    may be, 'willy introscope '.
    regards
    nag

  • One solution for Safari 3.2 crashing if you don't have any 3rd party apps

    So Safari 3.2 was crashing like crazy for me and i tried everything suggested on these forums without success. I never had any 3rd party "hacks" installed like PithHelmet that are known to cause the issue. I remembered i had a proxy server setup to access journals from my school library at home a while back. Tried disabling that and now safari 3.2 has been running without crashing for 2 days.
    Just putting it out there for those of you still having crashing issues. I'm sure it's not the cure-all, but maybe some of you still have a proxy enabled. I hope apple fixes this particular issue eventually, because i need to use the proxy.
    Message was edited by: zig_k

    I guess that is the other side of the analysis. I am similarly not really aware of the way that the proxy works -- I guess it confirms data and settings -- and with the PAC file, these are changed from time to time. I guess, if it is working in FF and not Safari, you might try a few things like turning off then on the proxy settings; creating another Location; resetting Safari (keep that one for later); trashing the relevant preference files; asking your sysadmin; and sending feedback to Apple, with the PAC file location.

Maybe you are looking for