Can any body please read this and ans me

hi all,
can any body please read this and tell is there any function module or some other thing is available.
Material masters are location specific, and Progistix maintains part details in Canadian $, now we need to get the logic how SAP converts the standard cost of the material from Canadian $ to US $
The plant number of Canada is 3002.

Hi
you would have to use the following function modules
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
regards
Dinesh

Similar Messages

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can any body please give me an idea and the Import and Export process?

Can any body please give me an idea and the Import and Export process? Excise Duty and other duties and so on.
I will be highly obliged for the help.
Regards,
Subhasish

for importing material,every importer has to file bill of entry in customs.
first vendor send some documents like certificate of origine , bill of lading, packing list etc to importer.
on the basis of those documents,importer makes supporting documents like duty calculation sheet, GATE declaration form,CHA declaration form,insurance certificate.
CHA (custom house agent ) file the bill of entry on behalf of impoter in customs.
custom verify it.
after duty payment, CHA can clears the consignment from custom.
there are two typs of BOE.
1 Home consumption BOE
2 Warehousing BOE
in 1st type of BOE , payment of duty is done at the time of custom clearance
and in 2nd type of BOE, importer can put material in warehouse without payment of duty. at time of using those material from warehouse,importer has to file out bond warehouse BOE and pay the all duties.

Uncaught Exception - Can any body please suggest what is wrong

SRM gurus,
Can any body suggest what is wrong with the below error
Fresh SRM 7 installation , all the configuration is complete but when shopping cart is created getting this error.
Checked the logical systems and all other setting everything is fine.
Not sure why this error is coming.
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: BUDGET_SC_CHECK of program SAPLBBP_PD
Form: PROCDOC_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BASE===========CP
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BO_SC==========CP
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BO_SC_ADV======CP
Edited by: srisrm on Dec 12, 2010 4:57 AM

hi
please go through the note no sapnote_0001276694
regards
prakash

Can any body please explain the hr payroll process in detail

Hi Experts,
I am newbie to HR abap.Can any body give their valuable experience regarding payroll proces in hr.
Thanks and Regards,
Sravanthi.

Check this out,
payroll
Re: payroll material
Hope this will help.
ashish

Can any body explain me this query?   select 'alter index '||index_name||' monitoring usage' as index_monitor from user_indexes where index_name='EMP';

Initially i've a put an index of emp table in monitoring state..
later i've got this query
select 'alter index '||index_name||' monitoring usage' as index_monitor from user_indexes where index_name='EMP';
can any body explain me what is the meaning of this query...
and how do that query in the strings of projection area works....
i'm totally confused
thank you in advance.

This is referred to as SQL generating SQL. It is most useful when you need to generate SQL statements for all indexes or indexes for one user. After generating the text you then would execute it in SQLPlus or the tool of your choice. If you combine this with a spool statement, SPOOL MyGeneratedScript.SQL you can run it with @MyGeneratedScript in SQLPlus. I combine this into a script which generates the file, calls the editor so you can look it over and then executes it. Here is an example of moving indexes to a different tablespace.
-- UTL_Move_Indexs_To_New_TableSpace_Script.SQL
/* This script will grab all the tables out of the specified source tablespace
** and move them into the specified target tablespace. Ensure the the target
** exists and has sufficient room. You must be logged in as the table owner.
ACCEPT v_source_tablespace_name PROMPT 'Enter source tablespace name: '
ACCEPT v_target_tablespace_name PROMPT 'Enter target tablespace name: '
SET HEADING OFF
SET FEEDBACK OFF
SET TERMOUT OFF
SET ECHO OFF
SPOOL _move_index.SQL
SELECT    'ALTER INDEX '
       || ndx.owner
       || '.'
       || ndx.index_name
       || CHR (10)
       || 'REBUILD '
       || CHR (10)
       || 'TABLESPACE '
       || UPPER ('&v_target_tablespace_name')
       || ';'
         sql_statement
FROM   dba_indexes ndx
WHERE      ndx.tablespace_name = UPPER ('&v_source_tablespace_name')
       AND ndx.index_type <> 'LOB'
ORDER BY ndx.owner,
         ndx.index_name;
SPOOL OFF
--Edit the move script
EDIT _move_index
--Reset parameters.
SET TERMOUT ON
PAUSE Hit Ctrl+C to ABORT, any key to CONTINUE,
-- Run the move script
SPOOL Move_Indexs_To_New_TableSpace.LOG
@_move_index
SPOOL OFF
--Reset parameters.
SET TERMOUT on
SET FEEDBACK on
SET HEADING on
Marcus Baocn

Can any body please help me

Hi all,
I have got a microstar MS 6340 ver 1 motherboard and i tried installing a PCI 32m nvida graphics card under windows xp. when ever i turn the PC on, i get no screen and the machine keeps beeping. the motherboard has an onboard graphice card but i dont know how to diable it. i have searched the web and cant find the manual to help me or someone to tell me what to do. can some one please help me disable the onboard graphic's.
Thanks a million.
Ps. if any body knows where to get the manual from, can you please post the link for me.
Cheers ) ) )

wird... in the v1 manual there is no indication for integrated VGA.... no wonder your board is the ms6340M v1 (is it??)....
and thats a little difference
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=131&MODEL=MS-6340M
here is the manual for this mainboard
http://download.msi.com.tw/support/mnu_exe/E6340Mv1.0.exe
there is the frame buffer seting but there is no disable option for the on board vga....
try the new bios... (but check if this is the corect board!!!)
this is the link for v4.7 bios
http://download.msi.com.tw/support/bos_exe/6340v47.exe
[size=15]but be cereful i'm not responsible for any miss flushes [/SIZE]

HELP ME PLEASE :(:(:(please read this and give any knowlege of the subject

ok i just whiped the harddrive on my computer today and i just reinstalled itunes. Is there ANY way to get the songs i already have on my ipod to get into my itunes library so when i update my ipod it wont empty it? PLEASE HELP ME.
Thank you,
Fabiano

You will have to use a third party program to copy from ipod to iTUnes. you ipod is not ment to be a backup of your music and you should make backups of your music once you copy from the iPod to iTunes/your PC http://www.apple.com/support/itunes/musicstore/backup/
You will have to first set the iPod to disk mode. To do this connect it to your PC, when itunes opens and says "This library is linked to another one do you want to delete blah blah" hit no, rightclick the ipod in iTUnes, hit options, then put a check mark beside "Enable Disk Usage". Hit ok
Now you can read the artical at iLounge here http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ and/or use yamipod here http://www.yamipod.com/main/modules/home/

HELP! Someone please read this and send any knowledge or opinions my way

Im having a major problem syncing my 160 Gb Classic to my Mac OS X.... I synced my ipod to my computer and it wiped it clean...nothing left..... then i went to try and resync all 23,000 songs and my itunes would freeze when the ipod eventually turned up in itunes (often it would show up on the desk top but not in itunes)
I called apple support and spoke with an agent named Michael and told him of my 160 classic ipod woes we went over many things together on the phone numerous times such as reseting ipod restarting my computer and trying many other things including updating itunes eventually I got it to sync but it did not sync all my music I was missing around 500 songs. Then When I played my Ipod the songs began pausing before playing skipping to the next song then skipping randomly. at one point I turned it off and it turned back on with a mind of its own & began to play a song... I tried to resync it and GOT THIS MESSAGE
*"iTunes has detected an iPod that appears to be corrupted. You may need to restore this ipod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPOD"*
I disconnected and tried to reconnect the ipod nothing Then restored it back to its factory settings... *And got this message*
*"The iPod "iPod" could not be restored. An unkown error occurred (1430)"*
I tried somemore and got this message
*"The iPod "iPod" could not be restored. An unkown error occurred (1416)"*
Then Michael from tech support said it must be a problem with my 3 month old Ipods harddrive... he sent me a box to send it away in for repair.
Then a few days later a friend who syncs his Ipod up to my computer came by and synced his I mentioned the problem and that Michael told me its with my ipod... The the same thing happened to my friends iPod.... He synced it to another friends computer and it seemed fine then he called me and said his music is skipping and pausing.. even though his was wiped by my computer and re synced on another
*Could this be a problem with my Mac computer? my Itunes? or is it just coincidence that two Ipods got messed up from trying to sync to my Mac? I don't know If I should send mine in for repair cause I have a feeling its a problem with something else...*

I am having the exact same problem. I just got a brand new HP Pavilion laptop recently and at first my 160gb classic worked fine with it, then at one point when I connected it to my laptop iTunes just froze. I couldn't see any of my files in my iPod but it showed that the space was being used. Then before I knew it I lost all my 32gb of music. I managed to get it to sync to computer and put some music back on but now I am back to the issue where iTunes just freezes and my music got wiped again. I cannot figure it out.

Please read this and help me.

I got passed on OCJP exam and need certificates right now so I sent lots of e-mail to oracle official e-mail.
like 3days ago, I got an requesting e-mail from [email protected] saying that I need to send my address to
[email protected] so that they can process my certificate through DHL.
I was so delighted to send my all information and address to [email protected] immediately but today, I got another requesting mail saying that they haven't get any response from me. Why didn't they get my response ? I'm sure I sent e-mail to [email protected]
I was confused and replied back to [email protected] but got auto reply saying that I got failed to send e-mail.
I think that [email protected] set me as spam or something because they always ignore me and actually
I've sent them e-mail a lot saying 'expedite my certificate through faster way'
Somebody check for me please...

Yeah, I would say it's same request. I request many official to expedite my shipment but they all said no.
so when I was just like giving it up, somebody sent e-mail to me saying that I need to send my address to [email protected] so that they can send my certificate through DHL
I was so pleased and sent my address to [email protected] but I got another e-mail saying they didn't get my reply.
I think [email protected] has problem or something with my e-mail account, give that they always ignore me.
below are the e-mail datails
Dear Customer:
Service Request Number 22293275 (AutoSR : OCP | OCP: 1 | Issue Type : Certification Success Kit) has been updated.
Dear Jeong ,
Our records ind icate that your Oracle Certified Professional, Java SE 6 Programmer success kit was sent to you as on 14-Sep-2011 and its a general practice that a candidate is required to wait for 4-6 weeks from the date of the shipment of success kit to receive the same . We see that you need your success kit urgently and hence we request you to provide us your address in the below format at [email protected] so that we can process the reshipment through DHL .
Testing ID :
Address Line1:
Address Line2:
Address Line3:
City:
State:
Zip code / Postal code:
Country:
Phone No:
Once your mailing address is verified your kit will be re-mailed. Please include your Prometric Testing ID- and SR# in all your emails.
We have not received any response for the same till date. Please mail us the details in 3 business days to SunCert so that we can assist you.
Note: If we do not receive any response by 27-Sept -2011, your Service Request will be closed and you will have to raise a new Service Request for your certification query.
Regards,
OCP Team.
To view the progress on-line please use the iSupport homepage at
http://global-service.oraclecorp.com/OA_HTML/iburdt01.jsp?srID=22293275
Please do not reply to this mail - please use iSupport instead.
Thank you for using iSupport,
Best Regards - Oracle

Can any body plz explain this?

hi all,
I has to write a program in java for converting Excel to PDF...I got this code...but i'm clear with wht is happing here,,,and in this code they used apache.fop...i'm not able to find fop api's. plz help me out.....
public static void main(String args[]) {
     try {
          ByteArrayOutputStream fopout=new ByteArrayOutputStream();
          FileOutputStream outfile=new FileOutputStream(args[2]);
          Driver driver =new Driver();
          driver.setOutputStream(fopout);
          driver.setRenderer(Driver.RENDER_PDF);
          Transformer transformer=TransformerFactory
          .newInstance().newTransformer(new StreamSource(new File(args[1])));
          transformer.transform(new StreamSource(new File(args[0])),
          new SAXResult(driver.getContentHandler()));
          PdfReader reader = new PdfReader(fopout.toByteArray());
          int n = reader.getNumberOfPages();
          Document document = new Document(reader.getPageSizeWithRotation(1));
          PdfWriter writer = PdfWriter.getInstance(document, outfile);
          writer.setEncryption(PdfWriter.STRENGTH40BITS, "pdf", null,
          PdfWriter.AllowCopy);
          document.open();
          PdfContentByte cb = writer.getDirectContent();
          PdfImportedPage page;
          int rotation;
          int i = 0;
          while (i < n) {
          i++;
          document.setPageSize(reader.getPageSizeWithRotation(i));
          document.newPage();
          page = writer.getImportedPage(reader, i);
          rotation = reader.getPageRotation(i);
          if (rotation == 90 || rotation == 270) {
               cb.addTemplate(page, 0, -1f, 1f, 0, 0,
               reader.getPageSizeWithRotation(i).height()); }
          else {
               cb.addTemplate(page, 1f, 0, 0, 1f, 0, 0);
          System.out.println("Processed page " + i);
          document.close();
     catch( Exception e) {
          e.printStackTrace();
regards
[email protected]

Okay. I think we've been here before.
How far have you got so far?
When you say "excel" do you really mean an "MS excel" file or do you mean a CSV file?
What are you using to read the excel file at the moment? Are you reading the excel file yet? Do you need to do anything with the data in the excel file? Do you have the option to retrieve the data in any other format?
What should the pdf file look like?
Please, take the time to explain your problem and circumstances. Just telling us "tell me wht is the solution for this task" doesn't cut it, "Plz " or no "Plz ".

Guys I need help please read this and try to understand it

I want to know that what does a new driver has to do with modem that it makes noises like "click click" during the gameplay...
Right now i am using the old version that came with the box.It is 43.45 that has been released almost an year ago.Believe me guys it works almost perfect no noise and nothing.
If i come into 2004 then the latest version is 56.72 .I've heard that nVidia has uploaded this driver on april 1st (Happy fool day from nVidia). Thus guys i wish to come into this new year and i want to update my driver,and when i install this driver it will give me trouble from the modem. Couple of more things i have checked and they're the driver that came with the box is by DETONATOR and these days the drivers says FORCEWARE and the second thing is that the old software that comes in CD from nVidia doesnt contain "DIGITAL VIBRANCE" but all new drivers has it. Could this problem is from here? I am totally puzzled first i thought that there is something wrong with the graphic card but when i checked it was modem.When i changed the modem same problem.I changed the slot, same thing. Thought there is a virus or spyware but there was not.Hardware is ok because old version is working fine.
PLEASE GUYS I NEED ALL OF YOUR SUGGESTIONS DONT IGNORE MY PROBLEM
GRAPHIC CARD is MSI nVIDIA FX-5200
MB is MSI 865P-NEO
Modem is CONEXANT
One more thing i want to mention
if i turn on pc and start playing games(any 3D games) will run perfect on any driver whether it is new or oldest. But if i connect to internet with modem and later disconnect it and then start playing games or any 3D presentation the modem starts crying (CLICK CLICK) and this is the same sound that comes when we start connecting(dialing, probably when it gives signal) the internet.
In this situation i have to completely turn off my pc and also unplugging it (DISCHARGING ELECTRICITY). and then, when i turn on the pc and start any game without connecting to internet everything runs fine (On the new drivers)....
Now as i have mentioned before i changed the slots removed and even reinstalled.Nothing happens just a click click sound.
but for the old driver everything runs fine even if i am online and watching 3D presentations or playing games....
So anybody ????????????????????????

assuming its a pci one as he suggests it may well be an irq thing
try playing swap the pci slot with it
'

ZEN SLEEK IS MESSED UP! please read this and try to he

ok hello. i just got the zen sleek for christmas. i previeosly had the muvo tx/fm mp3 player...... so i stupidly thought that i knew everything. so (before i installed the disk thing that comes with it) i charged it up and plugged it into my comp. THEN i started to read the directions! They said to NOT plug in your mp3 player, so i unplugged it quikly and tryed to turn it on to make sure everything was ok. It wasn't. Now my Zen has the little paper with arrows around it logo. but the arrows are not dark. which means that i could safley remove the hardware from the comp. the arrows were never dark. i installed the sisk and tryed to plug in my Zen sleek again, but now my computer isnt even readng it!!!!!! PLEASE HELP ME IN ANY WAY YOU CAN!!!
P.S: you can also email me at: [email protected]

of course. but when i open the little explorer deal icon, its not even reading that i have an mp3 player connected. but it is connected to my USB port

Can any body tell whether this logic will work or not

To calculate quantity for the material for particular month
This report is used to calculate demand plan(zzdpfc) for market 001 and 002
eg: the opt shld be
material number           month              quantity
1. 1000                           02/2007              40 (market 001+002 for the same      materila and same month)
2. 1000                          03/2007               20 (same as above)
3. 1001                           02/2007               30 (same as above)
i want to know whether this pgm will work according to this requirement or not .if not please change the code accordingly .please let me know it urgent.
REPORT ZPRODUCT_ROLL                           .
TableS: S507.
DATA: BEGIN OF T_DATA OCCURS 0,
       matnr LIKE S507-matnr,
       SPMON LIKE S507-SPMON,
       ZZDPFC LIKE S507-ZZDPFC,
       ZZMARKET LIKE S507-ZZMARKET,
       END OF T_DATA.
DATA:WA_DEMPLAN(10) TYPE C.
data:material(18) type c.
data : period like sy-datum..
period = sy-datum+0(6).
Select    mATNR SPMON ZZDPFC ZZMARKET
From S507
into corresponding fields of table t_DATA WHERE
VRSIO = '000' AND BEDAE = 'KSV' AND ZZDMTYP = '001'
AND ZZDPFC GT '0' AND ZZMARKET IN ('001','002').
AND SPMON >= PERIOD.
   SORT T_DATA BY MATNR SPMON.
write:/04 'Material',25 'Demand Plant', 50 'Period'.
LOOP AT T_DATA.
move t_data to material.
modify t_data.
*WRITE:/02 t_data-MATNR ,25 t_data-ZZDPFC,45 t_data-ZZMARKET,
*70 t_data-SPMON.
at new spmon.
sum.
write : /02 material color 5,25 t_data-zzdpfc COLOR 5 ,50 t_data-spmon color 5..
endat.
endloop.

hi arun,
use collect keyword in the loop, it add the quantity fields for the particular material
or
use control brake statement in the loop and endloop.
regards,
seshu.

Can any body help me in creating a jar using Weblogic server tool

I have created the class files of the container manged bean successfully.I want to create the jar file using the weblogic tool.
I have created a new jar file and now I have to add a bean class file and a home class file to it.In the tool I choose a the path using the choose button.When I say next it complaints that it cannot locate the bean files.
Can any body please help me soon..
waiting for your reply.

I had similar problems with the WLS deploy tool. I think they were solved by making sure that I started the tool from the directory that contained the root package of my EJBs.
It might work...

Can any body please read this and ans me

Similar Messages

Maybe you are looking for