Can any body tell exception condition in cells
Hi can anybody tell.
I have three coloumns budget , plan cost and actual cost.
I need to write an exception if plan cost and actual cost is greater than budget then these 2 cloumns should show in red.
But only those cells whose values are greater than budget.
So i have defined 2 formulas actual cost - budget and Plan cost - budget.
I aggreagaton tab general tab i have given BAD1 - Greater than 0.
definition tab - i have used the total actual cost.
dispaly tab- i have sed the deifference colooumn i.e actual cost - budget.
But iam able to see all the cells are highlighted in red .
I need only those cells whose values exceed budget.
Edited by: manukonda anil kumar on Dec 20, 2010 11:35 AM
Edited by: manukonda anil kumar on Dec 21, 2010 10:53 AM
Dear prasad
This is not about 2 colors. Like you said i have already there are coulumns for budget , plan and actual.
so i have to define exception when actual and plan are greater than budget then the 2 coulms shold appear in clours.
But there are cases in cells when actual and plan values are not greater than budget then those individual cells should not appear in colour .
But in my case the full coloumn is appearing in colour.
can u suggest.
Similar Messages
-
Can any body tell me OR condition in Process Chains.
Dear ALL
Can any body tell me OR condition in Process Chains..
I have a process chain 0FI_GL_4 datasource.
I this i have a start variant then execute infopackage then activate datastore data
and at last we have put the OR Condition which has a description Every (With End : OFIGL_O02 Process Chain has failed).
That was the description showing to me.
Now the process chain is running successfully , but iam not getting the OR Condition , why they have put .Hi Anil, Please refer this [article|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/005fa02b-8a27-2d10-66a1-df845ef07d15]. This explains how to use Intelligence in Process Chains. Second [article |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/705aefe8-8a27-2d10-7b8e-88017ee9158c]is reg. using Decision Steps in Process Chains.
-
Can any body tell me what is the need of creating shipping Instruction
Hi Everybody,
Can any body tell me what is the need of creating shipping Instruction in Material Management & where it is used.
Menu path -> IMG -> Material Management -> Purchasing - > Material Master - > Define Shipping instruction.
2. What is the use of Manufacturer Part Profile & how it is used in the SAP system.
Menu path -> IMG -> Material Management -> Purchasing - > Material Master - > Define Manufacturer Part Profile.
Thanks & Regds.....
RashmiThis characteristic describes the packaging and shipping requirements that have to be fulfilled by the vendor
The instructions issued to a vendor regarding the shipment or packing of ordered goods.
o CO coil
o NE unpacked
o NT nylon net
A manufacturer part profile contains indicators and control parameters, which define the conditions for using (inventory-managed or non-inventory-managed) manufacturer parts in the procurement process.
The manufacturer part profile specifies how manufacturer parts (MPN materials) can be used in the procurement process.
The manufacturer part profile is assigned to the master record for a firm's own inventory-managed material.
Among other things, it determines whether:
u2022 The MPN material or the inventory-managed material is to be entered in a purchase order
u2022 Info records can be created for the MPN material or the firm's own material
u2022 The MPN material can be changed during the procurement process -
Can any body tell me how to make changes in the print layout of Fb03.
hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
MaveIf you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu -
Hi i want to download BW , please can any body tell me that where can
hi i want to download BW , please can any body tell me that where can i have that
thanks
basuBW is not available, as far as I am aware, for free download at this time.
matt -
Can any body tell me the general tickets.
Hi all,
Can any body tell me the general tickets received by users in production support.means the issues which we have to solve.Hi
General tickets
1) SID missings
2) ODS activation failed
3) Delta failures from ODS to Cube
4) Authorizations to Co Codes for the reports
5) Error records in PSA
6) Special characters or Invalid characters
7)Timestamp error
Etc
Hope it helps
regards
AK
Assign Points if usefull -
Can any body tell me about dotCMS pullContent macro ?
Can any body tell me about what are the table used by dotCMS pullContent macro ?. Actually i have changed created date of news in contentLet table and inode table whereas whenever i am searching records with that date range those records are not appearing can any body please help me.
Regards,
Lokesh Kumar PattajoshiHi Praveen,
Event container is the container which stores the values of the BO attaribures which get assigned to that instance of the BO.
If you go to SWO1 transaction and check the BO for which the event is triggered, you would see all the possible attributes than can be assigned.
To pass the values of the BO event container to the workflow, you need to maintain the necessary binding between the BO event container and the workflow container. This can be done in the 'Basic Data', Start Events tab. If you click on automatic binding, the system would prompt for a default binding. You could opt to use that or create your own binding. Make sure that the datatypes match.
After mapping the event container to workflow container, you can check in the workflow log for the values passed to the workflow container. If you like to directly check the values stored in the event container, go to SWO1 and simulate an instance of the BO. You can then check the values there.
Hope this helps!
Regards,
Saumya -
I have interview in ibm , can any body tell queistion ask by ibm
hi all
iam sap fico consultantant i have interview in ibm , can any body tell queistion ask by ibm,if any way to getting interview quiestions please.......
thank u
chinnaHi,
Dude, I dont think any one will have questions asked by IBM as such. Try the links below which might help you in your interview. You can also search in this forum for more FAQ's. Get some real time issues from this forum
http://www.sap-img.com/financial/fi-faq.htm
http://www.erpgenie.com/sapfunc/fi.htm
http://www.sapprofessionals.org/?q=125_fi_questions_for_certification
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/sap+solutions&
All the best
Regards
Genie -
Can any body tell the seqence in the following events.
can any body tell the seqence in the following events.
at selection screen
at selection screen on field
at selection screen outputHi ,
The sequence of the events and the explanation is follows:
1)At selection-screen output : It is triggered when the selection screen is loaded in memory before being displayed.
2)At selection-screen on field:It is tiggered when the user key in the field.
3)At selection-screen : It is triggered before leaving the selection screen.
Reward if helpful.
cheers.
syed -
Microsoft dynamics ax used on a MAC operating system? Can any body tell me?
Dear ALL
Can Microsoft Ax Dynamics client be installed and used on a MAC operating system?
Can any body tell me?You might want to try using the contact us link on the Microsoft Dynamic Ax site. http://www.microsoft.com/en-us/dynamics/erp-explore-ax-capabilities.aspx
They will likely know the answer to your question. -
Recently Iam purchased a Iphone from U.S, but iam residing in India, so can any body tell me in india how can i get support as my phone charger is not working from where in india i can replace it
gosharma wrote:
What if we have Applecare? Applecare is worldwide. Isnt it?
Not on an iPhone. -
Can any body tell me when we do full buffering db tables
hello all
can any body tell me when we do full buffering , what changes will occurs in database server?
After buffer we added some fields in database table what changes will be there in database server?Hi Swamy,
refer this link
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21f244446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/935324d37011d194ba00a0c94260a5/content.htm
http://abapprogramming.blogspot.com/2007/11/buffering-in-sap-abap.html
Table Buffer:Table Buffer is a place on the RAM where we store the whole table temperorly.Single Buffer:It is one type of buffering techniques through which we can store single record of a table on RAM temperorly. If more details are present ...
This r some think to buffer the data in application server. Buffer not allowed will buffer data in AS. Data will be fetched directly from Database server. Buffer switched on means it buffers data in AP means data is fetched from application Server. Buffer switched allowed but switched off. Full buffer to store the table in AP. Generic buffer - It is a comparison of fields i.e. data retired by the matching record.
Cheers
Mohinder Singh Chauhan -
hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance
There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham -
Can any body tell me, can we attach field exits to Njoy trnsactions in 4.7
Hi,
can any body tell me how to attach field exits to the enjoy transactions in 4.7.
I was not been able to attch the field exits to "Account assignement catagory" in trnasaction ME51N(Purchase requisition creation) using the program "RSMODPRF".
Please suggest.
Best Regards
Ramanjaneya ReddyBut hey! Your in 4.7, use BADIs!
Goto transaction SE18, search and you will find some stuff like ME_PROCESS_REQ. There are several dozens for purchasing, so go for the new technics.
By the way, I'm not sure if workaround is still possible in 4.7.
Implementation will be done with SE19.
Regards,
Christian -
Can any body tell me how many records can a db hold in a minute
can any body tell me how many records can a db hold in a minute
user644700 wrote:
can any body tell me how many records can a db hold in a minuteI would hope not since it will depend on X number of factors where X is a very large number.
Did you have anything specific in mind (version, hardware, etc...)? I assume you mean load and not hold?
Maybe you are looking for
-
Hi, do u have any report in SAP which shows MM and FI balances in stock after any adjustments. thanks RP
-
I can't drag files from one shared library to another
My computers recognize and display all shared libraries, and the files play on each computer, but files cannot be copied from one to another. Is there a solution to this?
-
Condtion table name of (VBN1 transaction ) free goods SD
Hi all can any one tell me the condtion table name for <b>transaction VBN1</b> for <b>free goods SD</b>.its very urgent. Best Regards Bunty.
-
Inbox filling up with the same emails
My Inbox fills up many times a day with the same emails that It's already imported. I've trashed these new imports but it doesn't matter. Should I trash the plist? But will that lose my saved mail? The only thing that stops this temporarily is if I g
-
AdvancedDataGrid isItemSelected ?
I am trying to modify an itemrenderer used previously for dataGrid in a new AdvancedDataGrid. I am not having much luck getting the listData.owner .......here is a section of the code - please set me straight as to what I am doing wrong. dataProvider