Can any body tell me, how to send/receive the sms from java application
Hi All,
Can any body tell me, how to send/receive the sms from java application to mobile phones.
I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
the following error.
Cannot connect to GSM Device, error : -11
The best place to ask your question is at the JSMS website, forum or mailing list since this is no error that directly comes from a class belonging to the core Java classes.
Similar Messages
-
Can anybody tell me how to send/receive the sms from java application
Hi All,
Can any body tell me, how to send/receive the sms from java application to mobile phones.
I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
the following error.
Cannot connect to GSM Device, error : -11Which jsms? Google finds several.
Try the website where you downloaded it. -
Can any body tell me how much bw configured on port from below mentioned config details.
sh int GE-WAN3/1.720
GE-WAN3/1.720 is up, line protocol is up
Hardware is GigabitEthernet Interface, address is 0013.7f6d.2bc0 (bia 0013.7f6d.2bc0)
MTU 4474 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 29/255, rxload 130/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 720.
ARP type: ARPA, ARP Timeout 04:00:00
Keepalive not supported
43483205208 packets input, 30686252708584 bytes
4126465891920915 packets output, 125766989568145 bytes
and what is the above value indicate as it showing too much high BW.
Pl. helpJC,
The interface bandwidth is 1 Gbps as you can see below,
MTU 4474 bytes, BW 1000000 Kbit, DLY 10 usec,
The below are interface stats (or counters) that indicates the number of packets that came in via this interface
43483205208 packets input, 30686252708584 bytes
4126465891920915 packets output, 125766989568145 bytes
You can use "clear counters" to reset the above stats.
-Nagendra -
Can any one tell me how to send one PO to mutilple mail ids in vendor maste
Hi Experts,
Can any one tell me how to send one PO as a mail to multiple vendors who are all maintained in my vendor master record
Suppose I have 3 mail ids in my Vendor master record and I created a PO with that vendor, will that PO goes to all the three mail ids maintained in the vendor master record or only to one ?
Inorder to send to multiple mail ids, Do we need to do any configure any thing in SPRO settings functionally, if so where we have to maintain?
Or shall an Abaper needs to maintain a code for that.?
Please suggest me, I would appreciate your feed back.
Best Regards,
SairamGo to XK02 enter the vendor code
go to the communication tab
Email will be there press the ---> button
you can add many Emails in the list.
Please ensure that the message output is configured by
the SAP BASIS team
No need of any configuration
G.Ganesh Kumar -
Can any body tell me how to make changes in the print layout of Fb03.
hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
MaveIf you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu -
hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance
There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham -
Can any body tell me how many records can a db hold in a minute
can any body tell me how many records can a db hold in a minute
user644700 wrote:
can any body tell me how many records can a db hold in a minuteI would hope not since it will depend on X number of factors where X is a very large number.
Did you have anything specific in mind (version, hardware, etc...)? I assume you mean load and not hold? -
can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??
hi,
there's some microsoft support to this issue. check here http://support.microsoft.com/kb/2008385
regards.
From out of Nowhere -
Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K -
Can any body tell me How to store string array in a array
Can any body tell me How to store string array in a array
YesNot quite sure what question you're answering but here's how to copy an array.// given a String[] strArr
// pre Java 6
String[] newStrArr = new String[strArr.length];
System.arrayCopy(strArr, 0, newStrArr, 0, strArr.length);
// post Java 6
String[] newStrArr = Arrays.copyOf(strArr, strArr.length);Edit:
Or in fact use clone() as mark pointed out.
Message was edited by:
dwg -
CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?
CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?
Settings>general>accessibility>led flash alerts off
-
Can any body tell me how to pull SAP-CRM data into BW
Hi BW guru`s,
Does anybody tell me how to pull SAP-CRM data into BW.
Is there any configuaration setings takes place in CRM system or BW system?
Provide few of CRM datasources names (Transaction data Datasources)
Please explain indetail and give some examples.
Thanks in advance,
venkatHi.......
SAP CRM uses BW Adapter to extract data from SAP CRM and send it to SAP Business Information Warehouse and SAP NetWeaver Business Intelligence. For mBDocs, BW Adapter extracts objects for CRM business transactions and CRM billing use the BAdI CRM_BWA_MFLOW. However, in releases prior to SAP CRM 2005, after using transaction code RSA5 to activate business content in SAP CRM, you must use transaction code BWA5 to activate the business content for the BW Adapter.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Hope this helps you.........
Regards,
Debjani........ -
Can any body tell me how to know the daily loaded ODS & Cubes
Hi ,
Please tell me , I want to know the datatargets which are used for daily data loads ..
Thanks
PTHi,
You can check it by RSMO with data range and observe the daily loads.
Or You can check it by Manage screen of each target, there you can see the date of loads
or you can select the target and select the monitor sysmbol in top-->it will show the data loads for that particular target.
Regards
Pcrao. -
Can any one tell me How to load data in matrix from user table
Hi,
we need to load data to matrix when page loads. After loading data we should add row to that matrix and update the values in database without effecting previous data. It should have functionality like UDO Default Form. Can any help me out in this issue.
Regards,Hi Souji,
try this,
SAPbouiCOM.Form oForm;
SAPbouiCOM.DataTable DBTable;
SAPbouiCOM.DBDataSource dbDatasource;
string strqry;
oForm = SBO_Application.Forms.Item("FormUID");
int i;
SAPbouiCOM.Item oitem;
oitem = oForm.Items.Item("ItemUID");
objMatrix = (SAPbouiCOM.Matrix)oitem.Specific;
objMatrix.AddRow(1, objMatrix.RowCount + 1);
dbDatasource = (SAPbouiCOM.DBDataSourceoForm.DataSources.DBDataSources.Item("TableName");
DBTable= oForm.DataSources.DataTables.Add("UniqueName");
strqry = "paste Query that you want to fetch";
DBTableActivity.ExecuteQuery(strqry);
for (i = 0; i <= DBTable.Rows.Count - 1; i++)
objMatrix.FlushToDataSource();
dbDatasource.SetValue("column1(name)", i, System.Convert.ToString(DBTable.GetValue(0, i)));
dbDatasource.SetValue("column2(name)", i, System.Convert.ToString(DBTable.GetValue(1, i)));
dbDatasource.SetValue("column3(name)", i, System.Convert.ToString(DBTable.GetValue(2, i)));
dbDatasource.InsertRecord(i + 1);
objMatrix.LoadFromDataSource();
If it helps you, give me the reward points.
Thanks
Sravan Kumar Pothu -
Can any one tell me how to send Body in Email
Hi,
I have a internal table which contain information
Dear Sir,
pls find attached file.
Thanks and Regards
chandra
I want to send that message with attached PDF file,
my PDF file is going as a attached format if email address is maintained in Customer master table.
Regards
Chandra.Hi chandrashekar,
DATA:
I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA:
W_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
W_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
W_BUFFER TYPE STRING.
DATA:
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = ' '
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION '/1BCDWB/SF00000482'
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE W_BUFFER I_TLINE INTO W_BUFFER.
ENDLOOP.
TRANSLATE W_BUFFER USING '~'.
DO.
I_RECORD = W_BUFFER.
APPEND I_RECORD.
SHIFT W_BUFFER LEFT BY 255 PLACES.
IF W_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
REFRESH :
I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR W_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
I_OBJTXT = 'Find attached the output of the smartform.'.
APPEND I_OBJTXT.
I_OBJTXT = 'Regards,'.
APPEND I_OBJTXT.
I_OBJTXT = 'Sravanthi'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
W_DOC_CHNG-OBJ_NAME = 'Smartform'.
W_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10 .
W_DOC_CHNG-OBJ_DESCR = 'Smart form output'.
W_DOC_CHNG-SENSITIVTY = 'F'.
W_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'Smartform'.
CONCATENATE 'smartform output' 'pdf'
INTO I_OBJPACK-OBJ_DESCR.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = ' '.---------------> email id
I_RECLIST-EXPRESS = 'X'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_CHNG
PUT_IN_OUTBOX = 'X'
commit_work = 'X'
TABLES
PACKING_LIST = I_OBJPACK
CONTENTS_BIN = I_OBJBIN
OBJECT_HEADER = W_OBJHEAD
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF sy-subrc NE 0.
WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
After exceuting this program check status of the mail in the SOST transaction.
Regards,
Sravanthi
Maybe you are looking for
-
How do I save a card and where?
I have a card I want to save and need to know where and how to save it?
-
What sort of dial-up modems does one use with a "Bionic Desk Lamp" iMac?
Yes, I still use dial-up (and indeed, my aging Performa 5215 is still on its factory 14.4 modem). I'm planning on buying a used G4 iMac on eBay (see my posting in the OS 9 forum for related questions), but what sort of dial-up modem do I use, that wi
-
Hyperion Planning 11.1.2.1.0 Dataform validation issue
Hi All, Is there any way that if the validation fails the user should not be able to Save data in hyperion dataform. I have a scenario like this : I have budget in one row in dataform Flash in other and in the third I have a formula coloum Budget - F
-
Question regarding order partners (IHPA)
Hello, we have a partner determination procedure with 9 partner functions. Some of them are from partner type KU (customer), some PE (personnel number) and some AP (contact person). In my custom report i need to have name and adress of each of this 9
-
How to create a BOM without default warehouse on 8.82
Hi Expert, I have several item will make on 2 warehouse at same day for ship to different area. original I created to 2 different item code and 2 BOM for those 2 warehouse. on forecast, I set those 2 item code , after MRP running, 8.8 will let me k