Can any one expain the concept of Date Interval for Miles/Kms Accumulation

Hi ,
Can anyone explain the concept of Date Interval for Miles/Kms Accumulation V_T706P.
Where these entries are used?
Thanks.

For example we have the below mentioned cumulative rates,
1. 0 to 1000KM - 1$ per KM
2.1001 to 2000KM - 2$ per KM
If employee entered 1500KM in a single trip, the system will automatically calculate 2000$ (1000+(500*2)).
If employee entered 10 trips and each trip he has travelled 150KM in a month. But system will not add the no.of KM travelled for each trip.He will get reimbursement for 150KM travelled for each rip.
Thanks,
Nandagopal C

Similar Messages

Can any one explain the concept of Hash ( # ),

Hi All,
I am generating the report on Billing Cube.. for that cube I have DS 2lis_13_vdhdr, 2lis_13_vditm,
I am executing the report with characteristics Material , Billing Number and Key Figures Billing Value.
For Example : I am seeing the report By Material , in last line it is showing Hash ( # ),
When I am drill down by material by Billing no with Billing value.
Now it is showing the billing value agents the Billing Number and in the same time it is showing hash for the same Billing Number.
Eg: Material Billing No Billing Value
 120 199001 400 USD
 122 199002 500 USD
 125 199003 300 USD
 # 199001 000.00
 199002 000.00
 199003 000.00
Can any one explain the concept of Hash ( # ), and why the Billing No is reputing in Hash..
I have same problem in other Cubes with other Characteristics
How can I permanently Restrict Hash.. my user dont want to see in report..
Regards,
Shaik

Shaik,
since the thread in the Business Explorer forum has been marked as answered , I assume that this thread can also be closed as answered ... please assign points and close as answered..
Arun
other post
How can I permanently Restrict Hash..in Query level ( # )

Can any one share the Oracle Reports 6i Developer demo table scripts?

Hi,
I have to learn the Report 6i for my office project, I have installed the report 6i developer but I could not get the Demo CD, can any one share the Scripts for table (viz. Stock, stock_history , indcat ) creation and also the insert script for data population or provide the URLs where I can find the same.
thanking you in advance.
regards,
Sham.

Hi Denis,
Thanks for the reply, I have the setup for forms and reports 6i, what i was looking is the script to create the tables used in the
Oracle® Reports Developer
Building Reports
Release 6i
January, 2000
Part No. A73172-01
the table names are stocks, indcat etc, generally these demo script come along with the demo CD provided by oracle as i don't have the CD i am looking for these table creation script. if you have these scripts kindly share the same with me.
regards,
Sham.

Hi, can any body explain the concept of UTILIZATION IN EXCISE

hi,
sap gurus,
can any body explain the concept of Utilization in excise, if possible send me the documentation
part of that please.
please explain me on this also
in direct factory sales from direct factory to customer how utilisation works
in depot sales: first material has to reach from factory to depot and then it has to be passed to
customer then in this situation how utilisation works in SAP.
regards,
balaji.t

Dear balaji
Export under Rebate is the procedure in which the exporters first pay the central excise duty before clearing the goods from the factory and subsequently get it back by applying for rebate after the goods are exported. They have to apply to the Division or to the Maritime Commissioner (designated exclusively to look after all Export related issues) as the case may be, along with the required documents (usually the Export Promotion copy of the Shipping Bill and Bill of Lading) to prove that their goods had actually been exported.
Rebate can be claimed for both the inputs (purchased from indigenous markets and used in the manufacture of exported goods) as well as for the final products. Normally, rebate is being widely opted by non-excise assessees (for example garment exporters) who procure raw materials locally, manufacture their final products and export them. It is similar to Drawback of Customs duties in respect of Imported raw materials.
From SD side, you have to make settings in Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoices --> Maintain Default Excise Groups and Series Groups.
Here for the combination of sales area, shipping point, plant, excise group and series group, you have to maintain Export type [N under the tab Export]
thanks
G. Lakshmipathi

Can any one have the oracle AIA certification dumps

Hi All,
can any one have the Oracle AIA certification dumps please provide.
Thanks,
Siva

Hi All,
can any one have the Oracle AIA certification dumps please provide.
Thanks,
Siva

Can any one give the difference

can any one give the difference
between normal java class and java bean
Is every java bean is a java class

A java bean is a class (always)
A class does not have to be a java bean:
For a bean you need to have a no argument constructor
follow any of the other java bean guidelines/requirements...
http://java.sun.com/developer/onlineTraining/Beans/index.html

Can any one give step by step screen shots for dialog programming

can any one give step by step screen shots for dialog programming ..
thanks
venki...

Hi
see the following links and example programs and practice the same dialog pool program
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Reward points for useful Answers
Regards
Anji

Can any one recommend a good mixer/control surface for Soundtrack pro?

Hey,
Can any one recommend a good mixer/control surface for Soundtrack pro? I was looking at the Mackie Universal Pro, does anyone have any experience with that or any others?
Many thanks in advance,
Gus

I have to put in another vote for OWC and against ANYTHING else. I bought a Western Digital MyBook Studio Mac Edition several years ago and it did not play well with my old G-series minitower nor the Intel iMac that replaced it last year. The drive was noisy, would cause sleep issues, lock up, overheat and, when allegedly working, dragged down performance.
I had to leave it turned off most of the time and do TM backups when I remembered--not good.
Recently I grew sufficiently browned off at the device to rip out the perfectly good WD SATA drive inside it and order an OWC Mercury Elite Pro enclosure with FireWire 800, USB 2 and eSATA ports. The old drive required only minutes to install in the OWC and has behaved perfectly since. No lockups, overheating, and the same drive is actually quieter in the new enclosure than the old.
WD makes fine hard drives but their enclosures are not very friendly, even those sold as "Mac Editions."
EDIT: forgot one point. If you have a desktop Mac, don't get a "mobile" or "portable" drive that has no source of power other than the computer. If you MUST use USB, it's possible to have dropouts if the USB bus gets overwhelmed while the drive is connected. Go with a desktop dirve with a separate power supply if you can. If you must go with a USB portable drive lacking its own power supply, also buy a powered USB hub. That usualy provides portable drives with enough power to stay with the program when used at home.

Can any one wat the below topics means

hi,
can any one tell me wats the scope in the below mentioned topics and is it advantageous to work on this.
SAP Netweaver, post-installation configuration, smoke tests, customer business scenario implementation.
thanks in advance,
vinayaka

Hi
u have lots of scope for working in SAP netweaver
SAP NetWeaver provides an open integration and application platform and permits the integration of the Enterprise Services Architecture. You can unify business processes across technological boundaries, integrate applications for your employees as needed, and access and edit simple information easily and in a structured manner.
SAP NetWeaver is the basis for all SAP solutions on a given hardware. The business applications and the SAP xApps use the key areas of SAP NetWeaver.
SAP NetWeaver covers the following topics and components:
1.Security
2.People Integration:
- Multi-channel access
- Portal
- Collaboration
3.Information Integration:
- Business Intelligence
- Knowledge Management
- Master Data Management
4.Process Integration:
- Integration Broker
- Business Process Management
5.Application Platform:
- Java
- ABAP
- Business Services
- Connectivity
- DB and OS abstraction
- SAP Knowledge Warehouse
6.Life Cycle Management:
- Customizing
- Software Change Management

Can any one validate the below queries related to temp tablespace

For Temporary Tablespace Free and Used Space Information, I am using the following query
SELECT fs.tablespace_name tspace,
sum(fs.bytes)/(1024*1024) tot_ts_size_MB,
sum(df.bytes_free)/(1024*1024) free_ts_size_MB,
sum(df.bytes_used)/(1024*1024) used_ts_size_MB
FROM dba_temp_files fs,
(select tablespace_name, bytes_free, bytes_used from v$temp_space_header) df
WHERE fs.tablespace_name(+) = df.tablespace_name
GROUP BY fs.tablespace_name;
For getting how much space is being used by current users, I am using the following query
SELECT b.tablespace tablespace_name,
a.sid sid,
a.username username,
(b.blocks * c.value)/(1024*1024) Current_Usage
FROM v$session a, v$sort_usage b,
(select value from v$parameter where name = 'db_block_size') c
WHERE a.saddr = b.session_addr;
Can any one validate, that above queries are right or not?

Hi,
1.for first query i think u can also use only v$temp_Space_header to find out
the required details by
SELECT tablespace_name, SUM(bytes_used)/1024/1024 "Tot Used Space in MB",
SUM(bytes_free)/1024/1024 "Tot Free Space in MB"
FROM V$temp_space_header
GROUP BY tablespace_name;
2.http://www.dbazine.com/oracle/or-articles/weeg3
Thanks
Kuljeet

Can any one explain the steps to coinfigure PGP Encryption in B2B

Hello B2B Guru's,
Can any one explain how to configure PGP Encryption in B2B console?
were to specify path for loading pgp encryption jar in b2b console?
is it mandatory that PGP Encryption should have class to implement Call out interface?
which methods we need to implement in Call Out interface?
Thanks,

Please refer :
How to configure Call out in B2B ?

Can any one give the solution

One standard program is copied to zprogram i want to change that report Header(in output screen)Report name:Vendor Age Analysis-Forecasted payment.it will show in output as a report header.

Hi
you can do the following steps:
1) go to se38
2) type your program name.
3) select one of the radio buttons available there " attributes".
4) click on change.
5) you will get a screen.
6) there you can change the title of the program as your wish.
7) save it and actiavte it.
8) execute it.
Hope it is useful if i understood what you need.
reward points if useful.

Can any one expain APO-dp/snp production supports..........

hay APO gurs
this is suresh, new for APO -DP/SNP production support,what are my role and responsibilities in production support,exactly what i can do in production i dont know, can any respon plesss ,i am very thankeful to them......byeeee
regarda
Suresh Kumar.

hay scm gurea
please help me i am new to scm ,i need how to trouble shooting in DP,if it is in SNP how?
2. in production support which kind of jobs run daily/weekly in DP/SNP
3.what are the main errors happen in DP/SNP production supporting.
pleass give me answera this are my quires .
Regarding
suresh kumar
Edited by: suresh kumar on Mar 30, 2010 3:46 PM

Can any one identify the XML error....

SELECT EXTRACTVALUE(:NEW.REQUEST, '/Message/body'),
EXTRACTVALUE(:NEW.REQUEST, '/Message/from')
INTO V_REQUEST, V_MOB
FROM DUAL;
SELECT ACC_NUM, RGSTR_FLAG, LL_NUM
INTO V_ACC_NUM, V_RGSTR_FLAG, V_LL_NUM
FROM CUST_INFO
WHERE CUST_MOBILE_NUM LIKE V_MOB;
ERROR
ERROR at line 4:
ORA-01403: no data found
it works fine when I do
WHERE CUST_MOBILE_NUM LIKE 505282455;
Please can someone identify the error.
thanx.
REQUEST FIELD
<message>
<to>123</to>
<from>789</from>
<body>unbill</body>
<messagenumber>01</messagenumber>
</message>
THANX.

CORRECTION
<MESSAGE>
<TO>907</TO>
<FROM>505282455</FROM>
<BODY>UNBIL</BODY>
</MESSAGE>

Can any one Identify the error

SELECT EXTRACTVALUE(:NEW.REQUEST, '/Message/body'),
EXTRACTVALUE(:NEW.REQUEST, '/Message/from')
INTO V_REQUEST, V_MOB
FROM DUAL;
SELECT ACC_NUM, RGSTR_FLAG, LL_NUM
INTO V_ACC_NUM, V_RGSTR_FLAG, V_LL_NUM
FROM CUST_INFO
WHERE CUST_MOBILE_NUM LIKE V_MOB;
ERROR
ERROR at line 4:
ORA-01403: no data found
it works fine when I do
WHERE CUST_MOBILE_NUM LIKE 505282455;
Please can someone identify the error.
thanx.

REQUEST FIELD
<message>
<to>123</to>
<from>789</from>
<body>unbill</body>
<messagenumber>01</messagenumber>
</message>

Can any one expain the concept of Date Interval for Miles/Kms Accumulation

Similar Messages

Maybe you are looking for