Can any one explain how the Requests deletion in an ODS & Cube works?

Can any one explain how the Requests deletion in an ODS & Cube works & differs?

It works in the normal way as you delete a request but following are the differences between them
1) If you try to delete a request from the ODS, all the requests which are loaded after this request also get deleted, and in the cube its not.
2) You cannot delete a request from the ODS once its change log has been deleted, similary you cannot delete a request from the cube that has been compressed.
3) you can delete overlapping requests from a Cube. but in ODS its not possible.
Regards,
Bharat

Similar Messages

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

Can any one explain me the relation between BDC and reports events?

hi experts.....
can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
thanks in advance

The forums are expert forums. So the first thing I would do is change your name.
It's like entering a grand prix in a car with a "Student Driver" sign.
Rob

Can any one explain How transport mechanism happens

explain the concept of Transporting objects or packages from dev to production

Follow this steps in Development server
First login into development server
1)Try to keep all the objects in one folder(say myfolder) under portal content.
2)Now come to system administrator->tranport-> tansport package->export->portal content-> create a new folder
3)Select this new folder right click new transport package-> give the name and id->finish ->and close the transport package.
4)Now open the transport package which u have created just now.(make sure that u r transprt package is opend at right in content area)
5)Now select your folder which contains actual content(i.e iviews,pages,worksets,roles,etc ,, in this case my folder) right click add all objects to tansport package
6)Click on export button
7)Click on start export button
8)Download the export file using downlaod export file link
9)Save on your desktop
Now login into production server or quality server
Now importing the object inot quality server.
1)Go to system administartor->tansport->transport package-> import
2)Source for package file as client. click on browse and and select the .epa file which u have saved on to desktop (i.e from 9 step from above)
3)Click on upload
4)Select content to be overwritten as all and click on import
5)You get a message a import successful.
To check the object are present in your quality server or productin server
Go to the content administartor->portal content and check u r folder
try out this thread .
transfering objects from Prod to Dev
rewards point.

Can any one explain the steps to coinfigure PGP Encryption in B2B

Hello B2B Guru's,
Can any one explain how to configure PGP Encryption in B2B console?
were to specify path for loading pgp encryption jar in b2b console?
is it mandatory that PGP Encryption should have class to implement Call out interface?
which methods we need to implement in Call Out interface?
Thanks,

Please refer :
How to configure Call out in B2B ?

Can any one explain the concept of Hash ( # ),

Hi All,
I am generating the report on Billing Cube.. for that cube I have DS 2lis_13_vdhdr, 2lis_13_vditm,
I am executing the report with characteristics Material , Billing Number and Key Figures Billing Value.
For Example : I am seeing the report By Material , in last line it is showing Hash ( # ),
When I am drill down by material by Billing no with Billing value.
Now it is showing the billing value agents the Billing Number and in the same time it is showing hash for the same Billing Number.
Eg:       Material     Billing No     Billing Value
     120          199001     400 USD
     122          199002     500 USD
     125          199003     300 USD
     #          199001     000.00
               199002     000.00
               199003     000.00
Can any one explain the concept of Hash ( # ), and why the Billing No is reputing in Hash..
I have same problem in other Cubes with other Characteristics
<b>How can I permanently Restrict Hash.. my user dont want to see in report..</b>
Regards,
Shaik

Shaik,
since the thread in the Business Explorer forum has been marked as answered , I assume that this thread can also be closed as answered ... please assign points and close as answered..
Arun
other post
How can I permanently Restrict Hash..in Query level ( # )

Can any one tell me the exact procedure of how to update XPERIA NEO V to ICS using both PC companion and SUS.

Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.

SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Can any one explain me about Listeners in Java

Hi,
Can any one explain the Listeners concept in Java??
Will that work like net send in Windows NT??
How can we achieve the net send type of messaging in an Intenet application??
Is there any possibility??
Please help me out...
Thanks in advance,
Chaitanya.

The idea is that the "observable" object holds a list of listening classes which conform to a given interface. When an event occurs it walks the list calling a specific method in all the listeners with whatever parameters are suitable to speficy the event. Very often the listeneing objects are inner classes of some larger class which implement whatever effect the event is to have on the larger class.
Anyonymous inner classes are a convenient abbreviation here.
Usually the observable class has methods called add???Listener and
remove???Listener to add and remove listeners from it's list. There's also often a protected method called fire???Listeners (where ??? is the event type).
So for instance:
public interface DirtyListener {
   public void dirtyChanged(boolean to);
class DataModule {
   private Set dirtListeners = new HashSet(10);
   public void addDirtyListener(DirtyListener d) {
      dirtListeners.add(d);
   public void remiverDirtyListeners(DirtyListener d) {
      dirtListeners.remove(d);
   public void fireDirtyListeners(boolean to) {
      Iterater it;
      for(it = dirtyListeners.iterator(); it.hasNext();)
         ((DirtyListener)it->next()).dirtyChanged(to);
class ObservingClass {
    DateModule data = new DataModule();
    data.addDirtyListener(new DirtyListener() {
      public void dirtyChanged(boolean to) {
        saveButton.setEnabled(to);

Can any one explain me about bursting in bi publisher

hi all
can any one explain me about bursting in bi publisher
i need with small example with screen shots
Thanks
Sreedhar

Hi,
http://blogs.oracle.com/BIDeveloper/2009/03/bursting_1.html
look into this http://www.strsoftware.com/blogs/oracle/2009/12/how-to-burst-and-deliver-documents-from-bi-publisher-enterprise/
Thanks,
Srikanth

Hi gurus, can any one explain me about Badi & Bapi with eg.?

Hi gurus,
Can any one explain me about Badi & Bapi with examples.
Regards
Raghu

Hi Raghu
1) Badis means:
The BAdIs of the enhancement concept are not treated as standalone objects, but are integrated in the overall concept. Thus, the tools for defining BAdIs are part of the Enhancement Builder included in the ABAP Workbench.
Transaction SE18, up to now the only entry point for defining classic BAdIs, now manages classic and new BAdIs. When an existing BAdI is displayed or changed, it analyzes whether the BAdI is a classic or a new one, and then switches to the respective tool. In the case of a new BAdI, this tool is the enhancement spot editor
2) Bapis means:
BAPIs can be called within the R/3 System from external application systems and other programs. BAPIs are the communication standard for business applications. BAPI interface technology forms the basis for the following developments:
Connecting:
New R/3 components, for example, Advanced Planner and Optimizer (APO) and Business Information Warehouse (BW).
Non-SAP software
Legacy systems
Isolating components within the R/3 System in the context of Business Framework
Distributed R/3 scenarios with asynchronous connections using Application Link Enabling (ALE)
Connecting R/3 Systems to the Internet using Internet Application Components (IACs)
PC programs as frontends to the R/3 System, for example, Visual Basic (Microsoft) or Visual Age for Java (IBM).
Workflow applications that extend beyond system boundaries
Customers' and partners' own developments
Thanks
Trinath

Can any one explain me about Field symbols in Genral Reports?

Can any one explain me about Field symbols in Genral Reports?
If possible, plz explain me with the code to explain me about the field symbols.
Regards,
Krishna Chaitanya

Syntax
FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
Extras:
1. ... typing
2. ... STRUCTURE struc DEFAULT dobj
Effect
The FIELD-SYMBOLS statement declares a field symbol <fs>. The naming conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
Addition 1
... typing
Effect
You can use the addition typing to type the field symbol. The syntax of typing is described under Syntax of Typing. The typing specifies which memory areas can be assigned to the field symbol (see Checking the Typing) and in which operand positions it can be used.
Note
You can omit the addition typing outside of methods. In this case, the field symbol has the complete generic type any and is implicitly assigned the predefined constant space during the declaration.
Addition 2
... STRUCTURE struc DEFAULT dobj
Effect
If you specify the addition STRUCTURE instead of typing for a field symbol, and struc is a local program structure (a data object, not a data type) or a flat structure from the ABAP Dictionary, this structure is cast for the field symbol <fs>. You have to specify a data object dobj that is initially assigned to the field symbol.
The field symbol copies the technical attributes of structure struc as if it were completely typed. When you assign a data object using the addition DEFAULT, or later using ASSIGN, its complete data type is not checked in non- Unicode programs. Instead, the system merely checks whether it has at least the length of the structure and its alignment.
In Unicode programs, we differentiate between structured and elementary data objects. For a structured data object dobj, its Unicode fragment view has to match the one of struc. In the case of an elementary data object, the object must be character-type and flat, and struc must be purely character-type. The same applies to assignments of data objects to field symbols typed using STRUCTURE when using the ASSIGN statement.
Note
Field symbols declared using the addition STRUCTURE are a mixture of typed field symbols and a utility for casting structured data types. You should use the additions TYPE or LIKE for the FIELD-SYMBOLS statement to type field symbols, while the addition CASTING of the ASSIGN statement is used for casting.
Example
The first example shows the obsolete usage of the addition STRUCTURE.
DATA wa1 TYPE c LENGTH 512.
FIELD-SYMBOLS <scarr1> STRUCTURE scarr DEFAULT wa1.
<scarr1>-carrid = '...'.
The second example shows the replacement of STRUCTURE with the additions TYPE and CASTING.
DATA wa2 TYPE c LENGTH 512.
FIELD-SYMBOLS <scarr2> TYPE scarr.
ASSIGN wa2 TO <scarr2> CASTING.
<scarr2>-carrid = '...'.
Also,
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols

Please any one explain me the Different pay scales available for following

hi ,
Please any one explain me the Different pay scales available for following
streams.
sql,pl/sql developer-------------1 year
sql,pl/sql developer--------------2 years
forms ,Reports developer--------1 year
forms ,Reports developer--------2 years
jdeveloper--------------1 year
jdeveloper--------------2 years
oracle apps technical consultant(any module)----------1 year
oracle apps technical consultant(any module)---------2 years
oracle functional consultant(any module)-------------1,2 years
oracle workflow consultant------------------------1-2 years
Regards,
zakeer

You can probably earn even more if you Oracle ACE Member.

Can any one know how do restrict that fields in mm

hi gurus
can any one know how do we restrict the fields in the material master. Where do we control do any one know the transaction code for that.
Thanks in advance

OMSR
and
OMS9
Help for OMSR
Assign Fields to Field Selection Groups
To define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance, you must assign the field to a field selection group. You may assign a field to one field selection group only.
Before including customer-defined fields in a field selection group together with standard fields, or assigning standard fields to a different field selection group, familiarize yourself with the assignment of fields to field selection groups in the standard R/3 System.
Standard settings
The values of the field selection groups have been preassigned as follows:
001-110 Material master for industry
111-120 Reserved for customers (except where the values are already in use)
121-150 Material master for industry
151-210 Material master for retail
211-240 Reserved for customers
Recommendation
If possible, use the setting in the standard R/3 System. No further action is then required. If you want to make individual fields inaccessible, the easiest way is to group them together in a single field selection group and to set it to Display or Hide.
Activities
1. Check the setting in the standard R/3 System.
For this, you need to know the data screen on which the relevant field appears in the material master, and the name of the screen field, for example, MARA-MEINS in the case of the base unit of measure.
2. If necessary, change the assignment of fields to field selection groups as required.
Further notes
In the case of long texts, you define whether the entire screen is hidden or displayed, or whether entries are mandatory or optional. For this reason, each screen has been assigned to one of the following dummy fields:
LTEXT_BEST Purchase order text
LTEXT_GRUN Basic data text
LTEXT_IVER Internal comment
LTEXT_PRUE Inspection text
LTEXT_VERT Sales text
help for OMS9
Maintain Field Selection for Data Screens
In this IMG activity, you create and maintain field references. You can see where a field reference is used by choosing Where-used list.
Activities
Define or change the field references as required (except for field references with the prefix SAP which must not be changed). New field references must begin with Y or Z.
Changing the Field Selection Options for a Field Selection Group
1. Specify the field selection group.
2. Select the field selection option (hide, display, required entry, or optional entry) for each field reference as required.
3. Save your data.
Creating a Field Reference
1. Choose New entries.
2. Specify a field reference beginning with Y or Z.
3. Select the field selection option for each field selection group as required.
4. Save your data.
Changing a Field Reference
1. Double-click the relevant field reference.
2. Change the field selection option for each field selection group as required.
3. Save your data.
reward if usefull
Message was edited by:
Umakant Bhangale

Can any one explain BC SETS and ECATT

Can any one explain BC SETS and ECATT and explian whts the different.send me a good tutor abt BCSETS,ECATT (except SAP help)

Hi,
Please refer the link,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0f7bad90-0201-0010-82bc-dfeb17df7f08
Regards,
Hema.
Reward points if it is useful.

Can any one knowing how do you trouble shooting in alert config

Hi,
in my scenario i am using alert configaration..but i am not able to find the errors ..but error are there.can any one knowing how do you trouble shoot in alert config
thanks for rply..

Hi,
XI CCMS Alert Monitoring : Overview and Features
XI CCMS Alert Monitoring : Overview and Features
Triggering XI Alerts from a User Defined Function
Triggering XI Alerts from a User Defined Function
Alert Management - the Ideal Solution for Monitoring Your System
Alert Management - the Ideal Solution for Monitoring Your System
Thanks,
Madhu
Edited by: Madhu sudhan Reddy on Jul 24, 2008 12:07 PM

Can any one explain how the Requests deletion in an ODS & Cube works?

Similar Messages

Maybe you are looking for