Can any one give pros and cons of upgradation for Essbase 6.5 to 9.3.1

Hi,
plz let know,
major differences between these two(Essbase 6.5 and 9.3.1)
which one is stable, advantages and disadvanges, which one you suggest
Plz let me know.
Thanks,
sudhakar

Hi Sudhakar,
As we know every new version is a upgrade version of previous release.
So new version is always better, but there is some scenario when previous version could be better like 9.2.x is better and stable version than 9.3.0 (As we find)
Answer of your (What you are asking )
definitely 9.3.1 is better and stable version
so go for 9.3.1
Thanks
Dhanjit G.

Similar Messages

Can any one give step by step screen shots for dialog programming

can any one give step by step screen shots for dialog programming ..
thanks
venki...

Hi
see the following links and example programs and practice the same dialog pool program
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
<b>Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB</b>
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
<b>Reward points for useful Answers</b>
Regards
Anji

Can any one give me answer for these questions

Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value

ANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B

Can any one give me hint how to create(dsplay) calendar in jsp 1.2

can any one give me hint how to create(dsplay) calendar in jsp 1.2
friends
i wants to display calendar (not the date) in tabular way please give me hint how to create it

Hi,
i would just add my question cos it looks similar , how can i add calendar of the whole year and let the user browse and select it
thanX in advance

Can any one give guidence

hi, experts
    i am seraching job on abap
    here is my objects
u2022     Developed a Stock overview report.
u2022     Developed a Sales order report.
u2022     Developed Vendor analysis report.
u2022     Developed a report on Account receivable items.
ALV Reports:
u2022     Developed a report to display Invoice and delivery schedules.
u2022     Developed interactive report for displaying Purchase order and item details.
BDC (Batch Data Communication):
u2022     Developed a BDC program for migrating vendor master data (XK01) using table control.
u2022     Developed an Interface program for uploading purchase order data using session method.
Scripts and Smart Forms:
u2022     Developed a Purchase order document and developed driver program.
u2022     Modified form Medruck with logo and fields.
u2022     Maintained sales order document in Pdf format.
ALE/IDOCS:
u2022     Created Message types, Idoc types and customized idoc details for customer details using custom idoc.
u2022     Developed Idocs based on message types Matmas ,Cremas and Debmas.
u2022     Created Extended idocs for customer details.
BADI:
u2022     Added Screens in purchase order application.
u2022     Customized additional menuu2019s based on requirement.
ALVOOPS:
u2022     Developed a program for migrating bank master data (FI01) using simple inheritance.
u2022     Created Abstract class for displaying invoice details.
u2022     Created Hyperlinku2019s, Printed documents using custom control.
ALV Reports:
u2022     Developed an interactive report for displaying purchase order & respective items using Hierarchical Sequential Alvs.
u2022     Developed Interactive report for displaying company data and customer codes.
BDC (Batch Data Communication):
u2022     Developed a BDC program for uploading customer master data (XD01) using Session method.
u2022     Developed an Interface program for uploading material master data(MM01) using call transaction method.
Dialog programming:
u2022     Developed a dialog program for customer details and purchase order details using Tabstrip control.
u2022     Developed a dialog program for customer details and item details using Tabstrip control with subscreen.
ALE/IDOCS:
u2022     Developed Idocs from existing ones using Change pointer functionality.
u2022     Distributed vendor master data using Standard Idoc functionality.
BAPI:
u2022     Developed a Bapi interface program for creating a purchase requisition.
u2022     Developed a custom Bapi interface program.
ALVOOPS:
u2022     Created Exception Handling, Printed documents using custom control.
      can any one give guidence how to prepare for interviews and how to work on my objects,

I cannot provide guidance you seek, but want to point out that such "summary" should work well on LinkedIn. Why don´t you place your personal summary there and use that channel to support your effort?
Otto

Can any one give notes

hello
can any one give me notes on funds management. thanx for sending me
ashok

Hi
Funds management
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
http://sapsuperusers.com/forums/local_links.php?catid=1&linkid=715
Funds management :
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://ot.bloomu.edu/Documents/SAP/Word%20Docs/New/SAPReportsJan2006.pdf
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Why we cant use commit in trigger, can any one give proper explanation

Why we cant use commit in trigger, can any one give proper explanation

You shouldn't use a commit in a trigger if it's part of the same transaction as the action happening on the table.
Eg. Suppose you have a table that stores details of orders, and it has a trigger that updates the stock table.
If a customer comes along and creates an order but decides part way through that actually, they don't want the order after all, the transaction is rolled back.
If you don't put a commit in the transaction, then the stock table details remain unchanged - no order, so no stock reduction. If, however, you forced the commit to happen in the trigger, you now have no order, but the stock table details have changed.
That's not what you want to happen!
Sometimes it does make sense to have a commit in the trigger, but this is very much the exception. If you come across a table mutating error, it usually means that you have a problem with your design and that you need to rethink it, NOT bodge it by using autonomous_transaction and a commit.
Of course, the times when you'd use triggers should be few and far between - the above example is NOT how I'd code an orders-stock transaction; I'd have some PL/SQL that handled the transaction, rather than direct inserts onto the table.

Concurrent problem-can any one give idea 4 my assignment?

Create a GUI program to trace out any braces and keep track of the line having wrong closure of any
braces dynamically and identify the previous line typed if error prone note some red symbol in the
marigin. The marigin however must dynamically increase the line count of the coding.
can any one give idea 4 my assignment?

Providing any solution for your task makes no sense to anyone here. You need to manage your assignment, so start with it. Do not waist time asking somebody else to do your work!
Start! Go to work! Now!
Any specific questions you need to ask on your way can be answered here.

Can any one give the difference

can any one give the difference
between normal java class and java bean
Is every java bean is a java class

A java bean is a class (always)
A class does not have to be a java bean:
For a bean you need to have a no argument constructor
follow any of the other java bean guidelines/requirements...
http://java.sun.com/developer/onlineTraining/Beans/index.html

Can any one recommend a good mixer/control surface for Soundtrack pro?

Hey,
Can any one recommend a good mixer/control surface for Soundtrack pro? I was looking at the Mackie Universal Pro, does anyone have any experience with that or any others?
Many thanks in advance,
Gus

I have to put in another vote for OWC and against ANYTHING else. I bought a Western Digital MyBook Studio Mac Edition several years ago and it did not play well with my old G-series minitower nor the Intel iMac that replaced it last year. The drive was noisy, would cause sleep issues, lock up, overheat and, when allegedly working, dragged down performance.
I had to leave it turned off most of the time and do TM backups when I remembered--not good.
Recently I grew sufficiently browned off at the device to rip out the perfectly good WD SATA drive inside it and order an OWC Mercury Elite Pro enclosure with FireWire 800, USB 2 and eSATA ports. The old drive required only minutes to install in the OWC and has behaved perfectly since. No lockups, overheating, and the same drive is actually quieter in the new enclosure than the old.
WD makes fine hard drives but their enclosures are not very friendly, even those sold as "Mac Editions."
EDIT: forgot one point. If you have a desktop Mac, don't get a "mobile" or "portable" drive that has no source of power other than the computer. If you MUST use USB, it's possible to have dropouts if the USB bus gets overwhelmed while the drive is connected. Go with a desktop dirve with a separate power supply if you can. If you must go with a USB portable drive lacking its own power supply, also buy a powered USB hub. That usualy provides portable drives with enough power to stay with the program when used at home.

Pls can any one suggest me the Existing Report Name for Active and InActive

Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .

hi,
my transaction is VL02N change outbound delivery.

Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JK

Hi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
    documentheader = wa_documentheader
TABLES
    accountgl      = it_accountgl
    accountpayable = it_accountpayable
    currencyamount = it_currencyamount
    return         = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        return         = it_return
        currencyamount = it_currencyamount "currencyamount
        accountpayable = it_accountpayable "accountpayable
        accountgl      = it_accountgl "accountgl
      EXCEPTIONS
        OTHERS         = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Pros and cons of select for update clause

hi,
Can anybody explain what are the
pros and cons of select for update clause
11.2.0.1

As commented, there are no pros versus cons in this case.
What is important is to understand conceptually what this do and why it would be use.
Conceptually, a select for update reads and locks row(s). It is known as pessimistic locking.
Why would you want to do that? Well, you have a fat client (Delphi for example) and multiple users. When userA updates an invoice, you want that invoice row(s) locked and prevent others from making updates at the same time. Without locking, multiple users updating the same invoice will result in existing updated data being overwritten by old data that also has been updated. A situation called lost updates.
For web based clients that are stateless, pessimistic locking does not work - as the clients do not have state and pessimistic locking requires state. Which means an alternative method to select for update needs to be used to prevent lost updates. This method is called optimistic locking.
So it is not about pros versus cons. It is about understanding how the feature/technique/approach works and when to use it.. and when it is not suited to use it. All problems are not nails. All solutions are not the large hammer for driving in nails.

Trying to way the pros and cons of upgrading to the octane

3 lines, husband and son have ENV2's and I have an ENV3 with no problems at all with the shut down issue and have had it 2yrs. We have no home phone and my phone is the main line so it's on 24/7 since I have an elderly Mom that lives in the area I have too. I don't text a ton and I do receive some tweets and bettery life is very good. We are due for upgrades and online at verizon it's saying we can all get the octane free. Started reading all the user reviews and have some questions I need addressed if anyone can help. For the most part I think the ENV2 and 3 are just about the same except I find the keyboard layout better on the 3. I plan on looking at one in store and brining a list of stuff with me to check too. Mary
Low volume- Know there was a big discussion on this and complaints galore. On my ENV3 on the front at the top where I listen to calls is that also a speaker and that's why I can hear it good when closed and the octane does not work like this when closed? I can make my own ringtones and amplify them same for hubby but this would be big cons for us if they didn't do something to correct it on newer phones coming out.
Battery life seemed to be a complaint with some people. I know if you text a ton and send photos that will eat up battery life so are some phones defective with the battery or are people maybe just sending a lot of photo message to eat up battery life I wonder. With light texting and a few photos I can go a few days before I loose some bars now so hoping it would be the same on the octane.
Back light stays on when powered down- user specific defect?
To answer an incoming call, you must push OK first to unlock the device then press SEND to pick up the call. Should be a single button push to answer or at best OK twice, not 2 separate- True or false or maybe they don’t have the settings for answering a call right? Only have to push one button on my env3 and 2.
slow frustrating interface glitchy software awkward front keypad- front keypad looks like my ENV3 with a contact button and an ok button to push and navigate music and photos and such does the ok button do that? Maybe they have updated the software so it's not glitchty now?
you have to open the flip to see missed calls and silence the alarm. True or false? See missed calls and alarm function on front of ENV3 when it goes off and this is important to me
person on the other end of the line hears an echo. when i press "2" "12" is displayed- User specific glitches?
2.5mm headphone jack. you cannot play music without the micro sd card- I load music on my micro card now so have one and putting music on the actual phone itself is not a concern for me and I have the head phone adapter to use my regular head phones.
speaker isn't very loud while on speaker phone- glitch with that users phone or all of them as I do use that function quite a bit.
keyboard set up a little wonky- from photo looks like my ENV3 with space bar in the middle which I love better than the ENV2 keyboard
dropping calls on regular basis- User specific to their area and service? Hard to tell as they didn't state if all the other phones they have had never did that in their area. I get no dropped calls at home or out an about with any verizon phones we have had, we get great service here, only exception might be if we are way out in the boonies which is rarely but for home and out and about in town I need good reception so would assume this phone would work the same on our service as the ENV2 and 3 do and our old flip phones did.
there is no indicator that I have a voicemail message- guessing that has to be a user glitch as every phone we have had has a voice mail indicator so does it not have one?
Case back is very hard to get off without bending the whole thing and I can see that once it’s a bit worn, it will probably be hard to keep on. I never dropped my ENV but have already dropped this twice due to a more slippery nature. Its also harder to open quickly- not sure if they bought a case other than the black rubberized one from verizon which I have for my ENV3 and is fine or they are talking about the phone itself? Why would it be harder to open quickly? Defective hinges on that one?
for the camera. It doesn't have a zoom in option, which is strange- My ENV3 does not have a zoom function. Don’t care as I have $2,000 worth of professional equipment to take good photos so just need to snap something once in a while out and about to maybe send to someone and my ENV3 in daylight is great for that so assume this is just as good if not a little better camera quality.

We have 3 Octanes, I don't personally have one, I've not heard any complaints by any of them. My responses are in Bule below.
acraftylady wrote:
3 lines, husband and son have ENV2's and I have an ENV3 with no problems at all with the shut down issue and have had it 2yrs. We have no home phone and my phone is the main line so it's on 24/7 since I have an elderly Mom that lives in the area I have too. I don't text a ton and I do receive some tweets and bettery life is very good. We are due for upgrades and online at verizon it's saying we can all get the octane free. Started reading all the user reviews and have some questions I need addressed if anyone can help. For the most part I think the ENV2 and 3 are just about the same except I find the keyboard layout better on the 3. I plan on looking at one in store and brining a list of stuff with me to check too. Mary
Low volume- Know there was a big discussion on this and complaints galore. On my ENV3 on the front at the top where I listen to calls is that also a speaker and that's why I can hear it good when closed and the octane does not work like this when closed? I can make my own ringtones and amplify them same for hubby but this would be big cons for us if they didn't do something to correct it on newer phones coming out. No complaints
Battery life seemed to be a complaint with some people. I know if you text a ton and send photos that will eat up battery life so are some phones defective with the battery or are people maybe just sending a lot of photo message to eat up battery life I wonder. With light texting and a few photos I can go a few days before I loose some bars now so hoping it would be the same on the octane. Wife's phone goes 3-4 days without a charge.
Back light stays on when powered down- user specific defect? I've never seen this, but they are always on.
To answer an incoming call, you must push OK first to unlock the device then press SEND to pick up the call. Should be a single button push to answer or at best OK twice, not 2 separate- True or false or maybe they don’t have the settings for answering a call right? Only have to push one button on my env3 and 2. I believe it's one button to answer.
slow frustrating interface glitchy software awkward front keypad- front keypad looks like my ENV3 with a contact button and an ok button to push and navigate music and photos and such does the ok button do that? Maybe they have updated the software so it's not glitchty now? Never heaard complaints.
you have to open the flip to see missed calls and silence the alarm. True or false? See missed calls and alarm function on front of ENV3 when it goes off and this is important to me
person on the other end of the line hears an echo. when i press "2" "12" is displayed- User specific glitches? This was a problem early on with octanes, it's been fixed.
2.5mm headphone jack. you cannot play music without the micro sd card- I load music on my micro card now so have one and putting music on the actual phone itself is not a concern for me and I have the head phone adapter to use my regular head phones.
speaker isn't very loud while on speaker phone- glitch with that users phone or all of them as I do use that function quite a bit.
keyboard set up a little wonky- from photo looks like my ENV3 with space bar in the middle which I love better than the ENV2 keyboard
dropping calls on regular basis- User specific to their area and service? Hard to tell as they didn't state if all the other phones they have had never did that in their area. I get no dropped calls at home or out an about with any verizon phones we have had, we get great service here, only exception might be if we are way out in the boonies which is rarely but for home and out and about in town I need good reception so would assume this phone would work the same on our service as the ENV2 and 3 do and our old flip phones did. Never had problem with dropped calls and our octanes are used mainly in 3 different areas.
there is no indicator that I have a voicemail message- guessing that has to be a user glitch as every phone we have had has a voice mail indicator so does it not have one?
Case back is very hard to get off without bending the whole thing and I can see that once it’s a bit worn, it will probably be hard to keep on. I never dropped my ENV but have already dropped this twice due to a more slippery nature. Its also harder to open quickly- not sure if they bought a case other than the black rubberized one from verizon which I have for my ENV3 and is fine or they are talking about the phone itself? Why would it be harder to open quickly? Defective hinges on that one?
for the camera. It doesn't have a zoom in option, which is strange- My ENV3 does not have a zoom function. Don’t care as I have $2,000 worth of professional equipment to take good photos so just need to snap something once in a while out and about to maybe send to someone and my ENV3 in daylight is great for that so assume this is just as good if not a little better camera quality.

Pros and Cons of upgrading GT60 RAID0 to SSD and HDD

I purchased a GT60-0NCR-002US from Amazon last fall and am thinking of upgrading the HD set up.
Currently it has 2 500gb drives arranged in a RAID0.
I'm considering upgrading this to a 256GB SSD and a 1TB HDD and am curious to get some feedback about the pros and cons of doing this.
I'm assuming this setup would be considerably faster than the current one since I'd have the OS and all program files on the SSD. I'm not sure whether the 7200rpm 32gb cache HDD would be faster or slower than the current RAID0 but since this would only contain my documents and media, I don't think it's of that much concern.
Another question I have is how I'd go about getting Windows back on the system after replacing the hard drives. Could I reinstall an image of the current OS or would the fact that I'm changing the hard drive set up make that impossible?
Any advice would be appreciated.

Quote from: joshsayers on 23-May-13, 09:18:47
I just noticed on the original Amazon page where I bought the computer that the rpm of each 500GB disk is 7200. Considering they are in a RAID0 format, wouldn't I then be sacrificing speed going to one 1TB 7200rpm drive?
Maybe the decrease in speed for the data/media HDD would be more than compensated by having the OS and all software run off an SSD drive, though...
Regarding the re-installation of Windows: yes, I have the backup disk here. So it would just be a matter of re-installing on the SSD drive before the regular HD was installed? I called MSI help and asked them about this and the guy told me that because I would be going from RAID0 to two separate HDDs that this would affect the BIOS and thus the original Windows backup disk would be obsolete. Any truth to this?
The SSD + HDD will be much better overall. For media, does it really MATTER how fast it is? In all honesty, not really. The SSD makes everything else snappy, so what if you have to wait an extra 10 seconds when you copy a movie over and stuff? I wouldn't care, overall the laptop will FEEL much faster, and it generally will be.
There is SOME truth to what he said. You will have to change the bios to go from a RAID to AHCI or IDE (AHCI is preferred, but it may not work....I'm not sure). THAT much is true. The restore disk should work as usual though. It doesn't care WHERE it gets installed at, just that it gets installed. Atleast, it didn't matter for me.

Can any one give pros and cons of upgradation for Essbase 6.5 to 9.3.1

Similar Messages

Maybe you are looking for