Can any one help to know difference between flex 3 and flex 4

Hai
     Now i have my complete code in flex 3
     Need to convert complete code to flex 4
     Is code conversion will support flex 4 or any need any new sdk for it..
     I need to know whether it will affect the complete code..

Take a look at http://www.adobe.com/go/learn_flex4_featuremigrate_en
and http://opensource.adobe.com/wiki/display/flexsdk/Flex+4+Backwards+Compatability
-Gaurav
http://www.gauravj.com/blog

Similar Messages

  • Can any one tell me the difference between third party sales & intercompany

    Hai
    can any one tell me the difference between third party sales & intercompany billing
    reg

    Hi,
    In THIRD PARTY, Goods are sent to customer from the Vendor and no Delivery happens from Company Plant
    In THIRD PARTY, We will Pay to the Vendor and Bills Customer.
    In THIRD PARTY, the PR will be generated automatically from the Sales order
    In INTERCOMPANY Process, Goods are sent to customer from the Supplying Company code  to which an order was placed from the Ordering Company code
    In INTERCOMPANY,, Plant of the supplying company code will be assigned to the Ordering Sales Organisation
    In INTERCOMPANY , We Bills the customer and settles to the SUPPLY COMPANY CODE
    We will use two Pricing procedures, One Normal pricing and other is INTERCOMPANY pricing procedure.
    These are the Major differences.
    Please check these and revert back if you need more details
    regards,
    santosh

  • Can any one tell me the difference between VK11 and MR21

    Hi Folks,
    I have changed price of a material using VK12.
    When I go to the transaction MR21, it is still showing the old price.
    Can any one help what is the difference between VK11 and MR21.
    And i which scenarios these two were used?
    Thanks in Advance
    Gopi Krishna

    Hii,
    VK11: This is price master record to determine the sale price or discounts or freight or taxes which we going to charge to the final customer.  Through this transaction we will determine the price automatically either in sales or billing document.  These transaction is only applicable for sales & distribution module for determining the pricing for customers.
    The price determined through this we use in revenue realisation.
    MR21: Through this trnsaction Finance or Cost users upload the cost of the material.  The cost is
    Standard Cost or Moving average cost.
    Cost= Raw Material CostProcessing Cost(product process cost )Overheads(employee salaries)
    This cost is maintained at each material master in accounting view either standard cost or moving average cost.
    These cost is determined for every material movement within the company.
    Example: Production, transfer posting, goods issue- system post the quantity and at the same time system create an inventory entry i.e accounting entry for the transaction.  In this accounting entries, system consider the values from material master for generating accounting entry.
    If you upload production for 10 MT of material A and in material master if kept the cost of the material as 1000 then the accounting entry in production time as
                  Finish Goods Dr          10000
                            To Cost of Production Cr        10000
    These cost also determined sales transaction through VPRS condition type.
    Rewards if it helps
    Regards
    Goutham

  • Can any one help to know sales order deletion field name

    Hi,
    I would like to know,once order is deleted,where we can see the updation in table level nd let me know filed name.
    Thanks,
    Mohan.

    Dear Mohan
    Once sales order is deleted you can not see the data in table VBAK or VBRP.
    Regards
    Happy Surana

  • Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

    Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

    Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
    From Here  >  http://support.apple.com/kb/TS3694

  • I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?

    I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • Can any one help me in giving hr abap objects

    can any one help me in giving hr abap objects for practice, plz send some requriments which really need to worked

    Hi,
    Till the time you can work with these. I'll let you know more.
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf</a>
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf</a>
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf</a>
    I'll send you more in half hours.
    If helpful do reward the points.
    Regards
    Amit

  • Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am mack from Karachi Pakistan

    Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am maqsood  from Karachi Pakistan

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • TS1875 when trying to turn off compatibility mode on my itunes, i dont have a compatibility tab after right clicking properties. Can any one help

    When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • I have a early 2008 macbook 13 inch and dont have the pass word can any one help?

    I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.

    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

    im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled  switched it on and off what next?

    Did you try downloading the movie from iTunes on your iPad?  I know it takes longer but I'd try that. 
    Also try to reset all settings. 
    Settings > General > Reset. Reset all settings. 

  • Can not down load new i tunes up date says old bonjour can not be removed seek advice i tunes is nothing but a pain can any one help

    can not down load i tunes up date because old bonjour can not be removed can any one help
    because apple must know about this problem but are not help full

    I would try uninstalling all of the Apple software and then reinstalling it using these instructions:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    You migh want to try doing this when in safe mode.

  • Can any one help? "Windows cannot repair this computer automatically."

    I have a laptop satellite L455-S5000.
    And when I try and trun on my computer a black screen comes on that says "windows is loading files..."
    and after it loads a window pops up saying "startup repair is checking your computer for problems..."
    and after that gets done it says "Windows cannot repair this computer automatically" so I click "Send information about this problem (recommended)" and then I click "finish" then it shuts down. when I try turning it back on it does the same thing over. Please can any one help me fix it? Im really clueless about computers and I have know Idea what is wrong with it, or how to even go about fixing it. thanks.

    _Ashley_
    Turn the laptop off, hold down F8, turn the laptop on and let go of F8 when you see the Advanced Boot Options.
    In here, choose Repair Your Computer then press enter, follow the prompts, choose System Restore and restore your laptop to a point before the problems started.
    If the laptop cant get you there, a system recovery starts the laptop from it's factory state but you loose your programs and files doing that. Holding the "0" beside "9" while you turn the laptop on boots the laptop from its recovery partition if you accept data loss.

  • Hello everyone, can any one help regarding activation

    i have got iphone 4s, i factory unlocked my iphone 4s, but now when ever i put any sim apart from the orignal SIM,it goes on to activation required, then it says Sim not valid , though i get the signal bars at the top, and carrier in SETTINGS->GENERAL->ABOUT-> also changed from orignal carrier to new. I dont know what to do, Can any one help me, i have paid for the factory unlocking to a guy and now that guy is not picking my phone, i dont know what to do.

    Ask him... he is not the carrier. ONLY the carrier can authorize unlocking it. There is a process that has to be followed involving restoring the phone after the unlock has been approved. If the phone was hacked at any time prior to requesting a legitimate unlock, it may not be usable at all after attempting to have it legitimately unlocked.

Maybe you are looking for

  • Use Adobe Reader (or others) in Java Swing

    Hi, is there an adobe solution to show pdf files inside an java swing application? Regards Arno

  • PSE Photo Editor will not launch

    Bought PSE12 on 9/5/14 with new camera.  Installed and runs fine on Windows 7 desktop.  Installs on laptop.  Everything except Photo Editor will launch on the laptop.  I have uninstalled and reinstalled it several times.  It has made no difference

  • Add SIP Domain to Lync 2013

    Hello, I'm looking to add an additional SIP domain to Lync 2013 Standard.  We plan to give a group of users a login with the new SIP domain and add them to an existing front end pool.  Aside from adding the SIP domain within Topology Builder, what ar

  • Export still valid after approving updates

    Hi, I am currently in a process of setting up replica servers for each site. I do this with an export of the content and the database. Yesterday I have approved 5 new updates on my WSUS master server. My question is can I still use that content + db

  • How do I install software

    Just had my hard drive replaced. Tried to install Office by inserting disk but it doesn't install.