Can any one offer advice,,,Wireless routers/base stations ?

I have iMac G5 (Tiger 10.4) I am considering going wireless- but know very little. ( My ISP is Wanadoo) If I look to getting a router from Wanadoo, or separate source, what should I be aware of in terms of any 'extras' needed.
Does expenceof the Airport Extreme Base station offer an easier way (ie is it plug /play) or do you need a degree to install and operate. Your views and advice of how to about this (and possible economic outlets) would be most appreciated....Cheers loons

Oh also on a site note: Normaly if you are behind a router / NAT the IP's you have a private non routable IPs. Something like 192.168.1.xxx or 192.168.2.xxx. There are a few others.
Anyhow your router is configured to run as a DHCP server for your local network. Anyhow nothing stops you from assigning static non routable IPs to your computers. You can even mix and match...
For example in my network every computer with a server role has a static IP in the range from 192.168.2.10 to 192.168.2.49. The router is configured to assign IP addresses to computers that do not have a static one from 192.168.2.50 to 192.168.2.100.
So if my notebook roams arround it uses DHCP, if friends bring their PC for a LAN party they get a dynamic IP for the time they stay while I can access the servers over a static IP.
This of cause has nothing to do with your external IP that you get most likely over DHCP from your ISP and that can change.

Similar Messages

...can any one offer any advice ... My iMac crashed :( I need it for work :( :( the error is Exited with signal 8 Fsck failed ! ... There is a bunch of text b4 that and little bit after but that seems to the main thing ..? Any help would be amazing

My iMac crashed ... When I try to reboot I get nonlove... The error message is Exited with signal 8.... Fsck failed ! And then it says a few line and killing all processes and then it turns it self off again ...
ANy any suggestions would be fantastic

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Got my unlocked iPhone 3gs I can receive calls but not send. My iPhone was bought from the UK but I am using Spanish Movistar. Can any one offer a solution

I got my iPhone 3gs and wanted to use my old Movistar number. I can receive incoming calls but I can't call out. Can anyone offer a solution?

Didn't ask them as this was an unlocked phone, it should have worked straight away sending and receiving calls

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

HT4623 I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me to sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

moynul82 wrote:
but still it is not deliver to apple.
If Apple has not received your phone, obviously it can't even be evaluated for warranty purposes. Have you tried calling AppleCare to verify whether they have received the phone or not?

Can not down load new i tunes up date says old bonjour can not be removed seek advice i tunes is nothing but a pain can any one help

can not down load i tunes up date because old bonjour can not be removed can any one help
because apple must know about this problem but are not help full

I would try uninstalling all of the Apple software and then reinstalling it using these instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
You migh want to try doing this when in safe mode.

Can any one plz send me a screenshots of LDB

Can any one plz send me a screenshots of LDB

Hi
Goto SE36 Tcode and press f4 and see the related LDB and its components like Selections, Structures, Database program etc
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
<b>Reward points for useful Answers</b>
Regards
Anji

Hi, Some one hacked into my AirPort Base Station, which initially I had not secured with password. Now they took control by adding their own password. How can I regain ownership back?

Hi there,
I have an intruder into my AirPort Base Station wireless connection. The Station initially I did did not protect it with a Password, so the intruder branded it a name and put on a password. Is there any way I can deactivate the intruder's password and regain ownership?
Thanks for your answers in advance.

Some one hacked into my AirPort Base Station.....
No, they did not have to "hack" into your AirPort at all. Since the door to your wireless network was wide open, they simply walked right in.
Is there any way I can deactivate the intruder's password and regain ownership?
Hold the reset button on the back of the AirPort in for 9-10 seconds, and then release. Allow a full minute tor the AirPort to restart to a slow, blinking amber light.
The AirPort is back to new, out of the box settings. You can can now reconfigure it again......hopefully this time with a password.

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!

Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj S

I already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.

I have a early 2008 macbook 13 inch and dont have the pass word can any one help?

I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.

Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Hi gurus, can any one explain me about patches in SAP?

Hi gurus,
Can any one explain me about patches in SAP?
Regards
Raghu

Hi Raghu,
If you do bit of googleing you will get information.
http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm
http://help.sap.com/saphelp_smehp1/helpdata/en/57/4e0eb0eae6457ea69b509813048989/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/a8/02784278b66255e10000000a155106/content.htm
http://www.saptechies.com/support-package-stack-guide-sap-netweaver-70/
http://www.sapdev.co.uk/upgrade/sap-patching.htm
http://www.erpgreat.com/basis/sap-patch-administration.htm
Regards,
Deepanshu Sharma

Hi gurus, can any one explain me about Badi & Bapi with eg.?

Hi gurus,
Can any one explain me about Badi & Bapi with examples.
Regards
Raghu

Hi Raghu
1) Badis means:
The BAdIs of the enhancement concept are not treated as standalone objects, but are integrated in the overall concept. Thus, the tools for defining BAdIs are part of the Enhancement Builder included in the ABAP Workbench.
Transaction SE18, up to now the only entry point for defining classic BAdIs, now manages classic and new BAdIs. When an existing BAdI is displayed or changed, it analyzes whether the BAdI is a classic or a new one, and then switches to the respective tool. In the case of a new BAdI, this tool is the enhancement spot editor
2) Bapis means:
BAPIs can be called within the R/3 System from external application systems and other programs. BAPIs are the communication standard for business applications. BAPI interface technology forms the basis for the following developments:
Connecting:
New R/3 components, for example, Advanced Planner and Optimizer (APO) and Business Information Warehouse (BW).
Non-SAP software
Legacy systems
Isolating components within the R/3 System in the context of Business Framework
Distributed R/3 scenarios with asynchronous connections using Application Link Enabling (ALE)
Connecting R/3 Systems to the Internet using Internet Application Components (IACs)
PC programs as frontends to the R/3 System, for example, Visual Basic (Microsoft) or Visual Age for Java (IBM).
Workflow applications that extend beyond system boundaries
Customers' and partners' own developments
Thanks
Trinath

Can any one tell me how to send one PO to mutilple mail ids in vendor maste

Hi Experts,
Can any one tell me how to send one PO as a mail to multiple vendors who are all maintained in my vendor master record
Suppose I have 3 mail ids in my Vendor master record and I created a PO with that vendor, will that PO goes to all the three mail ids maintained in the vendor master record or only to one ?
Inorder to send to multiple mail ids, Do we need to do any configure any thing in SPRO settings functionally, if so where we have to maintain?
Or shall an Abaper needs to maintain a code for that.?
Please suggest me, I would appreciate your feed back.
Best Regards,
Sairam

Go to XK02 enter the vendor code
go to the communication tab
Email will be there press the ---> button
you can add many Emails in the list.
Please ensure that the message output is configured by
the SAP BASIS team
No need of any configuration
G.Ganesh Kumar

Can any one offer advice,,,Wireless routers/base stations ?

Similar Messages

Maybe you are looking for