Can any one please execute the program in ECC 6.0 - Dynamic Select Dump
Hi,
I am getting dump when I execute the following code in ECC 6.0 with Oracle DB. it works fine in 46, 47 unicode and non unicode and ERP2004.
If I remove the period '.' after '''4500016938''' it works fine. I just want to make sure it is ECC 6.0 issue.
TABLES: EKKO.
DATA L_WHERECOND TYPE TEXT50 OCCURS 0 WITH HEADER LINE.
CONCATENATE 'EBELN' 'EQ' '''4500016938''' '.'
INTO L_WHERECOND SEPARATED BY SPACE.
APPEND L_WHERECOND.
SELECT SINGLE * FROM EKKO
WHERE (L_WHERECOND).
WRITE: SY-SUBRC.
WRITE: EKKO-EBELN, ekko-ebeln.
I really appriciate for your help.
Thanks
Swamy
Yes, you do not need the "." at the end. The period is after the WHERE clause
WHERE (L_WHERECOND). "<<---- RIGHT HERE
BTW, got a dump in my ECC6.0 system too.
Regards,
RIch Heilman
Similar Messages
-
Can any one please send the pdf document TEP12
Hi Portal experts,
Can any one please send the pdf document TEP12?
Thanks,
Jitender>
jitender d wrote:
> Hi Portal experts,
> Can any one please send the pdf document TEP12?
>
> Thanks,
> Jitender
You are not allowed to ask for any Document like this
Reported......
Faisal -
Urgent can any one please gimem the sample code any simple BDC
Hi all,
Can any provide me with a simpel BDC code which involes the upload of the billing date and it's line items in a sales order creation transaction.it's a urgent requirement.
wegHi,
Refer this link u will get sample code and steps to proceed with
http://www.sapdevelopment.co.uk/bdc/bdc_call.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
Thanks & Regards,
Judith. -
Can any one please send me sample programs using java mapping..
<b>Can any one please send me sample programs using java mapping with input and output?</b>
please let me know how to get started with java mapping?
Prerequisites for java mapping ?
What are the jars need to be deployed for SAX,DOM. And how to do it in NWDS?
Use of Execute() and setparameter() ... StreamTransformation?
Some sample program using java mapping with simple logic(input and output)?Hi,
Did you go thro these blogs?
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
Nice blogs to start Java Mapping.
Go thro this one too.
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
Regards,
P.Venkat
Message was edited by:
Venkataramanan -
Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?
Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor! -
I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???
Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.
-
the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???
Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.
-
Can any one please tell me how to configure the oracle data gaurd. in steps
can any one please tell me how to configure the oracle data gaurd. in steps
Hi,
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
Regards
Yoonas -
Can any one please help me resolving the following error while accessing online lync meeting portal
When I am try to access the Join
Online Meeting link in a meeting portal in Lync Online, I am receiving the above of the following error messages in Microsoft Internet Explorer or Chrome browser.
Can any one please suggest me how to overcome this issue.
Thanks in advance
Kiran MarriHi,
Did the issue happen only for you or for multiple users?
You will need a valid conference for the URL to work. Please check if you did any typo for the URL. For example, in the format:
https://meet.contoso.com/username/confID
You can try to schedule a new conference from Outlook, check if the full URL like the example above and try to use this URL to join meeting.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
URGENT : can any one please give me BAPI related material
Hi there,
please help me i am a new learner to BAPI i dont know any thing about it can any one please send me the BAPI related material and also related videos or screen cams if available.http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g....>ALL
STEP BY STEP for BAPI
http://sap-img.com/abap/bapi-step-by-step-guidance.htm
BAPI Programming Guide
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
BAPI User Guide
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://ifr.sap.com/catalog/query.asp
http://www.****************/Tutorials/BAPI/BAPIMainPage.htm
step by step BAPI Creation with screen shots.
http://www.sapgenie.com/abap/bapi/example.htm
BAPI Programming guide: -
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
BAPI user guide: -
http://help.sap.com/saphelp_46c/helpdata/en/7e/5e115e4a1611d1894c0000e829fbbd/frameset.htm
BAPI STEP BY STEP PROCEDURE: -
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
Example:-
http://www.erpgenie.com/abap/bapi/example.htm
PDF download: -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200dd1cc-589e-2910-98a9-bb2c48b78dfa
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.planetsap.com/Bapi_main_page.htm
http://www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.****************/Tutorials/BAPI/CustomBAPICreation2/page1.htm
There are 5 different steps in BAPI.
Create BAPI Structure
Create BAPI Function Module or API Method.
Create BAPI object
Release BAPI Function Module.
Release BAPI object.
Step1. Creating BAPI Structure:
Go to <SE11>.
Select Data Type & Enter a name.
Click on Create.
Note: Always BAPI should be in a development class with request number (Not Local Object).
Select Structure & hit ENTER.
Enter the fields from your database. Make sure that the first field is the Primary Key Field.
Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
Enter TR.CODE <SE37>.
Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
Go back to <SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says ATTRIBUTES and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says IMPORT.
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says EXPORT.
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
Then hit <ENTER>.
Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
Enter function Module name and hit <ENTER>.
Select the second FORWARD ARROW button (>)to go to next step.
Check if every thing looks ok and again click on FORWARD ARROW button (>).
Then select YES and click on <SAVE>.
Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
Edit -> Change Release Status -> Object Type Component -> To Implemented.
Edit -> Change Release Status -> Object Type Component -> To Released.
Edit -> Change Release Status -> Object Type -> To Implemented.
Edit -> Change Release Status -> Object Type -> To Released.
Then click on <SAVE>.
Then click on Generate Button (4th button from left hand side looks like spinning wheel).
Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
First click on the middle button and then select ALL and hit ENTER.
Goto tab ALPHABETICAL and look for the object that you created. This shows that the BAPI object has been created successfully
BAPI/RFC Interface
A remote function call is a call to a function module running in a system different from the caller's.
The remote function can also be called from within the same system (as a remote call), but usually caller and callee will be in different systems.
In the SAP System, the ability to call remote functions is provided by the Remote Function Call interface system (RFC). RFC allows for remote calls between two SAP Systems (R/3 or R/2), or between an SAP System and a non-SAP System.
RFC consists of the following interfaces:-
A calling interface for ABAP programs
Any ABAP program can call a remote function using the CALL FUNCTION...DESTINATION statement. The DESTINATION parameter tells the SAP System that the called function runs in a system other than the caller's.
RFC communication with the remote system happens as part of the CALL FUNCTION statement.
RFC functions running in an SAP System must be actual function modules, and must be registered in the SAP System as "remote".
When both caller and called program are ABAP programs, the RFC interface provides both partners to the communication. The caller may be any ABAP program, while the called program must be a function module registered as remote.
Calling interfaces for non-SAP programs
When either the caller or the called partner is a non-ABAP program, it must be programmed to play the other partner in an RFC communication.
To help implement RFC partner programs in non-SAP Systems, SAP provides-
External Interfaces
RFC-based and GUI-based interfaces can be used by external programs to call function modules in SAP R/2 or R/3 systems and execute them in these systems.
Vice versa, ABAP programs in R/2 or R/3 can use the functions provided by external programs via these interfaces.
Reward points.. -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software. -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
Can any one please tell me why this e-class is not working
Hi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar BHi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar B -
Can any one tell whether the concept which i understood is correct or not
hai everyone
iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
concept as i understood about DriverManager:
suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
help me to clear my confusion
thanks in advancehai everyone
iam studying jdbc and this is what i understood about
the basic concept .can any one tell whether the
concept which i understood is correct or not
whenever the statement class.forName("driver class")
is executed driver class is loaded and registered
with drivermanager.Internally drivr class contains a
static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
}That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
whenever the statement class.forName("driver class")
is executed,static bloc is executed first and driver
class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
concept as i understood about
DriverManager:
suppose there may be situations where an application
developed in java has to deal with one or several
databases and this is accomplished with one or
different driver classes.so all these driver classes
are to be managed and this is done by DriverManager
class and in order to make the driver class itself
known to the driver manager we have to register the
driver classes with the help of registerDriver()
method of DriverManager class because
DriverManager is the class which will attempt
to load the driver classes into memory..Except for that last part, yes.
DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
what i understood is since the responsibility of
loading the class is done by class.forName("driver
class") only registering of the driver class is done
as the class is alredy loaded.Right. -
Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.
Maybe you are looking for
-
I have the following data in savings plan 4051 wagetype (regular contribution) 10000 priority is set to L 4054 wagetype catch up contribution 5000 When i run payroll , at Function LIMIT Input is 4051 10000 4054 : 5000 processing Individual limits WT
-
Cannot compile db2 application [SOLVED]
OK ppl i really need your help. I'm trying to compile a db2 program. I have a sqc file. I have done: db2 prep 13.sqc bindfile db2 bind 13.bnd gcc -I$DB2DIR/include -I~/sqllib/include -c 13_01.c and then when i try to do: gcc -o program 13_01.o -Wl,-r
-
Hi All, I have a doubt regarding the usage of webservice runtime. I have a scenario where we have a webdynpro ABAP program which displays all the messages for a particular interface. In our scenario we have only an Integration server of PI 7.1. In th
-
Query for CSV string construction
Empid Ename 1 a 1 b 2 C 2 d 3
-
Firefox constantly crashing with Windows 7
My computer was upgraded about a week ago with a new hard drive, new version of Windows (7 64 bit) installed on it, and everything else newly installed and up to date as far as I know, including the latest version of Firefox (26.0). Prior to this I h