Can any one pls tell me the procedure of crm datasourse data extraction r/3
hi
pls can any one pls tell me the procedure of crm datasourse data extraction from r/3
regards
subbu
Subbu,
First off please don't post the same question twice. I have locked your other question due to it being a duplicate.
Second off: don't expect an answer to your question immediately.
Third off: You need to read the rules of engagement before posting any more questions here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Fourth: You question is way too vague and honestly if you would have done a search or read some introductory material on CRM, you would have learnt that the CRM middleware handles the data transfer.
Last: I'm locking this thread because your question is way too vague, please take a look at the CRM wiki and help.sap.com and read all the associated documentation about CRM on those sites.
CRM wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/home
Then you can come back here if you have a detailed question after reading those materials.
Take care,
Stephen
CRM Forum Moderator
Similar Messages
-
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JKHi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
documentheader = wa_documentheader
TABLES
accountgl = it_accountgl
accountpayable = it_accountpayable
currencyamount = it_currencyamount
return = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = wa_documentheader
TABLES
return = it_return
currencyamount = it_currencyamount "currencyamount
accountpayable = it_accountpayable "accountpayable
accountgl = it_accountgl "accountgl
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. -
I am new to Java, can any one pls tell me what exactly is "Build Path".
Hi Techies...
i am new to Java, can any one pls tell me what exactly is "Build Path".
thanx in adv.
Regards
Nitin.V
Edited by: Nitin.V on Feb 12, 2008 11:08 PM
Edited by: Nitin.V on Feb 12, 2008 11:09 PMThe "BuildPath" is a place where all the "resources" referenced by your java program exists.
please visit http://www.u.arizona.edu/~jtmurphy/H2R/java.htm for more info -
I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.
Follow the instructions at the link I posted
have a lot of old stuff transferred from Mac to Mac to Mac that is slowing down everything
If that included Power PC apps, read here > Lion upgrade questions and answers: Apple Support Communities -
the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???
Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.
-
Can any one please tell me how to configure the oracle data gaurd. in steps
can any one please tell me how to configure the oracle data gaurd. in steps
Hi,
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
Regards
Yoonas -
Can any one please tell me why this e-class is not working
Hi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar BHi
I want to listen the following e-class. But its not running. Can any one please tell me why its not working
I have windows media player 11 in my system
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/34b9359e-0701-0010-f59d-ee014d5079b3?prtmode=navigate"></a>
Best Regards
Ravi Shankar B -
Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?
Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor! -
Can any one pls let me know how to set up budget in HRMS ..
Hi Gurus,
Can any one pls let me know, how to setup Budget in HRMS ..
with regards
user600722Hi,
Thank you for the Valuable Information Sir ....
with Regards
User600722 -
Can any one say What are the mandatory parameters in BAPI_GOODSMVT_CREATE
Hi,
Can any one say What are the mandatory parameters in
BAPI_GOODSMVT_CREATE.
Helpful answer will be rewarded.Hi,
The following is an abap program making used of the BAPI function BAPI_GOODSMVT_CREATE to do Goods Receipts for Purchase Order after importing the data from an external system.
BAPI TO Upload Inventory Data
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
02 - MB31 - Goods Receipts for Prod Order
03 - MB1A - Goods Issue
04 - MB1B - Transfer Posting
05 - MB1C - Enter Other Goods Receipt
06 - MB11
Domain: KZBEW - Movement Indicator
Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
errflag.
data: begin of pcitab occurs 100,
ext_doc(10), "External Document Number
mvt_type(3), "Movement Type
doc_date(8), "Document Date
post_date(8), "Posting Date
plant(4), "Plant
material(18), "Material Number
qty(13), "Quantity
recv_loc(4), "Receiving Location
issue_loc(4), "Issuing Location
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
del_no(10), "Delivery Purchase Order Number
del_item(3), "Delivery Item
prod_doc(10), "Production Document No
scrap_reason(10), "Scrap Reason
upd_sta(1), "Update Status
end of pcitab.
call function 'WS_UPLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
itab-move_type, itab-entry_qnt, itab-entry_uom,
itab-entry_uom_iso, itab-po_number, itab-po_item,
pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
TESTRUN = ' '
IMPORTING
goodsmvt_headret = mthead
MATERIALDOCUMENT =
MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
else.
write:/ mthead-mat_doc, mthead-doc_year.
perform upd_sta.
endif.
endif.
FORM UPD_STA *
form upd_sta.
loop at pcitab.
pcitab-upd_sta = 'X'.
modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
endform.
*--- End of Program
Reward for useful answers.
Regards,
Raj. -
I created an iMovie. When I try to export it crashes. Can any one walk me through the problem. In 3 hours, my mom's 80th b'day is taking place and this was one of the gifts.
All of the Spry files are missing and the basic_fs.css. It's a long list. If you use Chrome or Safari, you can view source (Safari) or Inspect Element (Chrome) and under Resources you will see the missing files highlighted.
-
I was wondering if anyone out there has been using an i pad sucessfully with someone who is suffering from Motor Neurone Disease. I am trying to work out what is the best way to be able to communicate with my father as this disease progresses. Any thoughts would be fantasticly appreciated.
Midnight Sun wrote:
Hi, thanks for the suggestions.
I tried the changes you suggest to my rc.conf, Windtalker. They were my original settings when I first installed Arch.
Everything works as before, except my eth0 seems to have a different address, but I still can't resolve names.
The thing is I could ping the DNS server and google before, and they responded, if I pinged their ip addresses. So I must be connecting to the internet, mustn't I?
But I still can't ping www.google.com , just get unknown host. So i think it's got to be a DNS problem because its when I try to use names instead of ip's that I get trouble.
Here is what I'm thinking(guessng), can anybody tell me if this is right:
When I ping www.google.com, ping needs to resolve the name so it can send the pings.
So ping asks Arch (the kernal or a network daemon) for help.
Arch finds a Nameserver's ip in resolv.conf, and tries to resolve the name by sending a request to the Nameserver via the default gateway.
The default gateway is linked to my router via eth0 in rc.conf
So, Arch can use the router to get the ip address for the name from the server and give it to ping.
And ping can ping it.
But ping just waits a while and says: unknown host
Any ideas?
I looked in Arch Bugs and found this http://bugs.archlinux.org/task/12643
could it be a problem with dhcpcd. It does seem to be running, but how can I find out more about what its up to.
Cheers all.
Please post the output of ifconfig.
Do you have any other machine connected to the same router? If yes, do you use static or dynamic ip-adress there? -
Can any please tell me how I can print from my iPad air to my hp printer??????
Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint -
Can any one share what is the flow of mm
HI
GURUS WHAT IS THE FLOW OF MM
THANKS IN ADVANCEHi,
MM Process Flow
The typical procurement cycle for a service or material consists of the following phases:
<b>1. Determination of Requirements</b>
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
<b>2. Source Determination</b>
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
<b>3. Vendor Selection and Comparison of Quotations</b>
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
<b>4. Purchase Order Processing</b>
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
<b>5. Purchase Order Follow-Up</b>
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
<b>6. Goods Receiving and Inventory Management</b>
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and under deliveries of ordered goods.
<b>7. Invoice Verification</b>
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment
Reward if useful
Chandru -
Hi experts(I need one badi to copy the ECC to CRM request date forsales ord
Hi experts,
I am creating the sales order in ECC Va01 it is getting reflected in CRM (Crmd_order) transaction but when i am creating a Follow-up trans in that i am selecting sales option-->to OCM Quotation the request date at the header level is automatically changed to todays date so i want same date which is there in Va01 request date so please tell be the BADI which one i have to use.
Urgent requirement.
Thank youI can use it but in that badi the date is same like Va01 request date (REQ_DATE_TZTF) so i cannot changed it i some the the date getting changed to todays date so please give the other badi which solves my problem
Maybe you are looking for
-
Ipod nano 4gb and ipod video 80g with windows vista
hello! i've been trying (rather unsuccessfully) to sync the ipod nano to my laptop which has windows vista OS. i have the latest itunes 7.2 (just updated today from 7.1) and i always get the "found new hardware" pop-up everytime i plug the ipod nano
-
Installing J4680 on Windows 7 Laptop
This one is driving me crazy!!!! I have a relatively new J4680 connected to my home wireless network. I currently have 4 computers successfully printing to it: 2 Dell Windows 7 desktops (which are connected via ethernet to the access point), 1 Windo
-
I have 2 tables Table Parent_child_table: ID | Parent_id | Name 1 | NULL | Kitchen 2 | 1 | Freezer 3 | NULL | Garden 4 | 3 | Grass Table Products: ID | parent_child_table_ID | Price | Comment 1 | 2 | 111 | aaaa 2 | 4 | 12 | vv I want to select Name f
-
4.3 title safe in 16.9 frame
Hi everyone. I have just started producing TV commercials in FCP Studio and using the latest JVC HD camera. I am shooting and editing 16.9 but got caught today with the title just out of the 4.3 zone. As 80% of viewers in Australia dont have 16.9 set
-
i am unable to sync my new iphone 4 with itunes.i am unable to see in the device tab, i am unable to sync my new iphone 4 with itunes.i am unable to see in the device tab