Can any one recommend a good mixer/control surface for Soundtrack pro?

Hey,
Can any one recommend a good mixer/control surface for Soundtrack pro? I was looking at the Mackie Universal Pro, does anyone have any experience with that or any others?
Many thanks in advance,
Gus

I have to put in another vote for OWC and against ANYTHING else. I bought a Western Digital MyBook Studio Mac Edition several years ago and it did not play well with my old G-series minitower nor the Intel iMac that replaced it last year. The drive was noisy, would cause sleep issues, lock up, overheat and, when allegedly working, dragged down performance.
I had to leave it turned off most of the time and do TM backups when I remembered--not good.
Recently I grew sufficiently browned off at the device to rip out the perfectly good WD SATA drive inside it and order an OWC Mercury Elite Pro enclosure with FireWire 800, USB 2 and eSATA ports. The old drive required only minutes to install in the OWC and has behaved perfectly since. No lockups, overheating, and the same drive is actually quieter in the new enclosure than the old.
WD makes fine hard drives but their enclosures are not very friendly, even those sold as "Mac Editions."
EDIT: forgot one point. If you have a desktop Mac, don't get a "mobile" or "portable" drive that has no source of power other than the computer. If you MUST use USB, it's possible to have dropouts if the USB bus gets overwhelmed while the drive is connected. Go with a desktop dirve with a separate power supply if you can. If you must go with a USB portable drive lacking its own power supply, also buy a powered USB hub. That usualy provides portable drives with enough power to stay with the program when used at home.

Similar Messages

Hey! Can any one recommend a good quality and user friendly external hard drive?

Hey! Can any one recommend a good quality and user friendly external hard drive?

Most reliable/highly recommended are those from Other World Computing (OWC):
http://eshop.macsales.com/

Can any one give step by step screen shots for dialog programming

can any one give step by step screen shots for dialog programming ..
thanks
venki...

Hi
see the following links and example programs and practice the same dialog pool program
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
<b>Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB</b>
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
<b>Reward points for useful Answers</b>
Regards
Anji

Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JK

Hi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
    documentheader = wa_documentheader
TABLES
    accountgl      = it_accountgl
    accountpayable = it_accountpayable
    currencyamount = it_currencyamount
    return         = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        return         = it_return
        currencyamount = it_currencyamount "currencyamount
        accountpayable = it_accountpayable "accountpayable
        accountgl      = it_accountgl "accountgl
      EXCEPTIONS
        OTHERS         = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Pls can any one suggest me the Existing Report Name for Active and InActive

Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .

hi,
my transaction is VL02N change outbound delivery.

Control Surface for Logic Pro 7.2

Hi Everybody !
I'm a newbie in Mac and Logic Pro. I want to buy a control surface for Logic Pro.
I found that Behringer B-CONTROL FADER BCF2000 Controller is compatible with Mac and Reason 3.0 but I'm not sure that it is compatible with Logic Pro. And it is within my budget !
Can anybody give some comments on this model ? Any suggestion other than this model ??
Cheers,
edtayin

Hi Everybody !
I'm a newbie in Mac and Logic Pro. I want to buy a
control surface for Logic Pro.
I found that Behringer B-CONTROL FADER BCF2000
Controller is compatible with Mac and Reason 3.0 but
I'm not sure that it is compatible with Logic Pro.
And it is within my budget !
Can anybody give some comments on this model ? Any
suggestion other than this model ??
Cheers,
edtayin
Just in case you buy one (and you should), I put a tutorial
on how to set it up with Logic. The manual is not really
clear on everything. Just go here
http://www.logicprohelp.com/viewtopic.php?p=16210#16210
It should get you up and running.
P.S. the BCF also does let you control Plugin
parameters along with 32 presets you can customize
it to your workflow.
Duel Processor 1.8 G5, Duel Raptors drives, 2GB Ram Mac OS X (10.4.6) LP72,Reason,StylusRMX,Digitech,TCHelicon,BBE Sound Processors, JBL 4311 Monitors

Can any one suggest a good downloder which work like internet download manager for MacBook

Can any one suggest me a downloder which works lo IDM
I have already used flocks etc..

Just open your Downloads window on your web browser.
MacBook Pros can't run Mac OS X 10.0.x. Please verify in Apple menu -> About This Mac what Mac OS X version you are using, and update your signature.

Control surface for Logic Pro

Hi There
Any ideas- what is the best control surface to use with Logic Pro?I would like a controller with at least 16 or 24 individaul faders.
Does the Mackie X Bus emulate a controller for Logic Pro?
thank you
G4 1.25 gig Mac OS X (10.3.8) G4,

I'm using a Mackie Control Universal and absolutely love it. The integration with Logic is top-notch. It would be nice to add an Extender and have 16 faders, but I'm finding that for what I do 8 faders at a time is plenty.
The X Bus has a Mackie Control layer that gives you the same amount of control. I believe the MCU's buttons are all displayed up on the X Bus screens. I'm sure you can find out more in the owners manual: http://www.mackie.com/products/digitalxbus/pdfs/X200OM_Ver1_04.pdf
Good luck!

Using Yamaha AW2400 as control surface for Logic Pro 9

I am a freelance pro sound engineer currently working as tech support for a local school. They have a Yamaha AW2400 in their studio, something which I have never come across before despite using numerous Yammy desks. They also have a Mac running Lion and Logic Pro 9.
What I want to do is use the desk as a control surface for Logic and record direct to the Mac if possible. I have installed the Yamaha USB-MIDI drivers on the Mac and had the desk running as a device for file transfer (via the USB connection) but everything else is beyond my knowledge of the desk and Logic.
I am a Pro Tools guy so Logic is a bit new to me but I know how to setup a new control surface. and the basic operations.
What I need help with is...
- what control surface to use as there is no preset on the desk for a AW2400
- what port settings to use on Logic
- what TX and RX settings to use on the AW2400
- what Remote Out settings to use on the AW2400
- any other info I may need
Thanks in advance, hope some can help.

See page 204 of the AW2400 User Guide...
http://www2.yamaha.co.jp/manual/pdf/pa/english/recorders/aw2400_en_om_b0.pdf
Note: the User Guide says that only LP7 is supported but you never know.. it may work with LP9... Test and see..

Can any one expain the concept of Date Interval for Miles/Kms Accumulation

Hi ,
Can anyone explain the concept of Date Interval for Miles/Kms Accumulation V_T706P.
Where these entries are used?
Thanks.

For example we have the below mentioned cumulative rates,
1. 0 to 1000KM - 1$ per KM
2.1001 to 2000KM - 2$ per KM
If employee entered 1500KM in a single trip, the system will automatically calculate 2000$ (1000+(500*2)).
If employee entered 10 trips and each trip he has travelled 150KM in a month. But system will not add the no.of KM travelled for each trip.He will get reimbursement for 150KM travelled for each rip.
Thanks,
Nandagopal C

Any suggestions on a good video editing software for MacBook Pro

I have just joined the MacBook Pro community would like an idea for good video software options

Also, compare the hardware specification (not just minimums) needed to actually
use the video editing software; plus consider external storage options of huge
capacity since most portable computers don't really have all that much storage.
A few years ago some suggested Avid Media Composer as professional software
but then in the same discussion, said the MacBook Pro may not be able to handle
the demands of the application; and went on to suggest an Apple Mac Pro tower.
Some software needs require further study prior to committing resources & funds
to discover perhaps the product may/may not be adequate. Avid likely is still costly.
Hopefully you can get a great editor with a few creative options, for a decent price.
Good luck & happy computing!

Can any one suggest a realtime audio recorder for Reaktor in Logic please?

Hi all,
So its been a few days so far with Logic Pro 7 on my new intel Mac, I made the jump from PC land and Nuendo and am trying to get up to speed.
What I am in dire need of is an application that I can use at the same time as Logic to record the output of some granular parts from Raktor5.
Basically I am trying to manually do some tweaks on sounds that I just want to be recorder into audio files and then inport them into logic for further editing.
Can any one make a good suggestion for such a think, or does Logic have something similar to this already built in?
Thank you all in advance for the help and past help I have recieved in this forum.
Cheers!

Hi all,
Thanks for the ideas... I went with the recorder box and that solution worked perfect! I used to be on a PC and had a Creamware system that allows for routing of audio any where with as many drivers as you want EG: Asio2, Wave and such at the same time so you could just have (at the time I was using Nuendo3) your DAW up, open an instance of soundforge and start weaking Reaktor ensembles from within your DAW host while recording direct to disk in sound forge with out having to do anything, it worked amazingly well.
This is the next best thing.
Now I just need to spend more time in Logic to learn my way around as I am a new user..
Cheers!

Can any one help me to sign a application ??

can any one help me to sign rotate me for n73

But for your own security, please don't publish you IMEI on this or any other public web site.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Can any one explian transpotation steps(process)

hai,
     When am transporting my objects from dev to q am getting errors. plz can any one explian the process inthe sense steps for transportation

Hi,
PLease follow these steps
1.      In the Data Warehousing Workbench, choose the Transport Connection functional area (transaction RSOR) by choosing the pushbutton in the left navigation window or by choosing the menu option Goto ® Transport Connection.
You can display or hide the left navigation window in the Data Warehousing Workbench by choosing Navigation Window On/Off.
       2.      Collect objects that you want to transport and check the settings.
More information: Collecting Objects
Objects Being Transported for the First Time (Package $TMP)
       3.      To transport the selected objects, choose Transport Objects. The Change Object Directory Entry dialog box appears.
       4.      Under Attributes, in the Package field, enter a transportable customer package (beginning with Y or Z).
This prompt only appears once for all collected objects. If you want to transport objects in different packages, you must collect the objects more than once.
You can change the package assignment subsequently.
More information: Changing Package Assignments
       5.      Save your entries. A dialog box appears where you are prompted for a transport request.
       6.      In the Request field, enter a transportable request or create a new request first.
       7.      Choose Continue.
       8.      Choose CTO Transport Organizer: Overview. The Workbench Organizer:Requests screen appears.
       9.      Release the individual tasks first and then the complete request.
Ensure that you release any requests with locked objects beforehand.
In the Collected Objects screen area, the system displays the corresponding information for individual objects in the following columns:
●        Last Changed by
●        Last changed by
●        Transport Request
●        Transport Request Holder
●        Package
   10.      In the log display in the lower screen area of Collected Objects, check the status of the transport.

Whts speciality in dvm we can have a custom db table? can any one justify?

Hi All,
DVM is used for static look up similar to this we can have a custom db table can any one tell y we need to go for DVM?
Thanks & Regards,
Rakes

You can use the DVM functions within XSLT transformations. You can not do that with DB adapter.
marc

Can any one recommend a good mixer/control surface for Soundtrack pro?

Similar Messages

Maybe you are looking for