Can any one suggest a good downloder which work like internet download manager for MacBook

Can any one suggest me a downloder which works lo IDM
I have already used flocks etc..

Just open your Downloads window on your web browser.
MacBook Pros can't run Mac OS X 10.0.x. Please verify in Apple menu -> About This Mac what Mac OS X version you are using, and update your signature.

Similar Messages

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

Can any one suggest a realtime audio recorder for Reaktor in Logic please?

Hi all,
So its been a few days so far with Logic Pro 7 on my new intel Mac, I made the jump from PC land and Nuendo and am trying to get up to speed.
What I am in dire need of is an application that I can use at the same time as Logic to record the output of some granular parts from Raktor5.
Basically I am trying to manually do some tweaks on sounds that I just want to be recorder into audio files and then inport them into logic for further editing.
Can any one make a good suggestion for such a think, or does Logic have something similar to this already built in?
Thank you all in advance for the help and past help I have recieved in this forum.
Cheers!

Hi all,
Thanks for the ideas... I went with the recorder box and that solution worked perfect! I used to be on a PC and had a Creamware system that allows for routing of audio any where with as many drivers as you want EG: Asio2, Wave and such at the same time so you could just have (at the time I was using Nuendo3) your DAW up, open an instance of soundforge and start weaking Reaktor ensembles from within your DAW host while recording direct to disk in sound forge with out having to do anything, it worked amazingly well.
This is the next best thing.
Now I just need to spend more time in Logic to learn my way around as I am a new user..
Cheers!

Can any one suggest me useing right way for using cost centers

Hello Guru's
I am in implementation Projec, The client is in Depote Sales process, i just want to know about the cost cenetr and their importance we are creating 20 different cost centers is it really required to create 20 different cost centers, for integrations with MM And SD should i have to take one cost center per plant for Purcase and Sales related activites are should i have to take different Cost Centers Purcase different and Sales different
Can any one suggest which is the right way to use the cost center for integration
Management     0010     DI10100010
Finance & Accounts     0020     DI10100020
HR and Personnel & Admin     0030     DI10100030
Purchase - Equipment     0040     DI10100040
Purchase - Parts     0050     DI10100050
Purchase - General     0060     DI10100060
Imports     0070     DI10100070
Sales & Marketing - Equipment     0080     DI10100080
Sales & Marketing - Parts     0090     DI10100090
Sales - Miscalenous     0100     DI10100100
Exports     0110     DI10100110
Logistics     0120     DI10100120
Services & Technical     0140     DI10100140
Information Technology & Systems     0150     DI10100150
Warehouse     0160     DI10100160
Workshop      0170     DI10100170
Workshop ( Repairs )     0180     DI10100180
Production     0190     DI10100190
Internal Audit     0200     DI10100200
Legal     0210     DI10100210
Training & Development     0220     DI10100220
Research & Development     0230     DI10100230
Moderator: Please, read basic SAP material on help.sap.com

hi,
my transaction is VL02N change outbound delivery.

Can any one suggest me how to use drawPixels method for 40 series devices

Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .

If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry.

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support

Pls can any one suggest me the Existing Report Name for Active and InActive

Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .

hi,
my transaction is VL02N change outbound delivery.

Can any one tell whether the concept which i understood is correct or not

hai everyone
iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
concept as i understood about DriverManager:
suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
help me to clear my confusion
thanks in advance

hai everyone
iam studying jdbc and this is what i understood about
the basic concept .can any one tell whether the
concept which i understood is correct or not
whenever the statement class.forName("driver class")
is executed driver class is loaded and registered
with drivermanager.Internally drivr class contains a
static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
}That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
whenever the statement class.forName("driver class")
is executed,static bloc is executed first and driver
class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
concept as i understood about
DriverManager:
suppose there may be situations where an application
developed in java has to deal with one or several
databases and this is accomplished with one or
different driver classes.so all these driver classes
are to be managed and this is done by DriverManager
class and in order to make the driver class itself
known to the driver manager we have to register the
driver classes with the help of registerDriver()
method of DriverManager class because
DriverManager is the class which will attempt
to load the driver classes into memory..Except for that last part, yes.
DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
what i understood is since the responsibility of
loading the class is done by class.forName("driver
class") only registering of the driver class is done
as the class is alredy loaded.Right.

New To SOA, can any one suggest how to proceed

Hi All,
I am new to SOA i want to learn basics in SOA. Can any one suggest me how to proceed, I know Web Services.
Thanking You,
Rakesh.

Marc made a list of resources too :
http://orasoa.blogspot.com/2007/05/newbie-getting-started-with-oracle-soa.html
the quickstarts are nice to start with too, just to see what the tools can do, how the concepts work etc

Hi There Can Any one Suggest me Any Discoveror Report?

Hi There,
Can Any one Suggest me Any Discoveror Report with it's name and respective responsibality.
Bachan

Hi William,
I am writting a sample code for you :
go to code wizard, select your node VBAk (where you have the attribute VBLEN )
and select the attribute. Now code will be automatically generated.
    DATA LO_ND_VBAk TYPE REF TO IF_WD_CONTEXT_NODE.
    DATA LO_EL_VBAk TYPE REF TO IF_WD_CONTEXT_ELEMENT.
    DATA LS_VBAk TYPE WD_THIS->ELEMENT_VBAk.
    DATA LV_VBLEN TYPE WD_THIS->ELEMENT_VBAk-VBLEN.
navigate from <CONTEXT> to <VBAk> via lead selection
    LO_ND_VBAk = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX__VBAk ).
get element via lead selection
    LO_EL_VBAk = LO_ND_VBAk ->GET_ELEMENT( ).
alternative access via index
lo_el_VBAk = lo_nd_VBAk ->get_element( index = 1 ).
@TODO handle not set lead selection
    IF LO_EL_VBAk IS INITIAL.
    ENDIF.
get single attribute
    LO_EL_VBAk ->GET_ATTRIBUTE(
      EXPORTING
        NAME = `VBLEN`
      IMPORTING
        VALUE = LV_VBLEN ).
Now based on the value LV_VBLEN select values from database table and fill the internal table.
DATA LT_VBAk TYPE WD_THIS->ELEMENTSVBAk. " this the table to keep the values
select VBLEN ERDAT ERNAM AUDAT from VBAK into table LT_VBAk where VBLEN = LV_VBLEN.
Now you can bind the table to appropriate node.
Regards,
Monishankar C

Can any body suggest the best institute which sap basis and netweaver admin

can any body suggest the best institute which sap basis and netweaver admin

Hi,
methodex is the best institute in hyderabad.
Thanks& Regards
sekhar

Can any one recommend a good mixer/control surface for Soundtrack pro?

Hey,
Can any one recommend a good mixer/control surface for Soundtrack pro? I was looking at the Mackie Universal Pro, does anyone have any experience with that or any others?
Many thanks in advance,
Gus

I have to put in another vote for OWC and against ANYTHING else. I bought a Western Digital MyBook Studio Mac Edition several years ago and it did not play well with my old G-series minitower nor the Intel iMac that replaced it last year. The drive was noisy, would cause sleep issues, lock up, overheat and, when allegedly working, dragged down performance.
I had to leave it turned off most of the time and do TM backups when I remembered--not good.
Recently I grew sufficiently browned off at the device to rip out the perfectly good WD SATA drive inside it and order an OWC Mercury Elite Pro enclosure with FireWire 800, USB 2 and eSATA ports. The old drive required only minutes to install in the OWC and has behaved perfectly since. No lockups, overheating, and the same drive is actually quieter in the new enclosure than the old.
WD makes fine hard drives but their enclosures are not very friendly, even those sold as "Mac Editions."
EDIT: forgot one point. If you have a desktop Mac, don't get a "mobile" or "portable" drive that has no source of power other than the computer. If you MUST use USB, it's possible to have dropouts if the USB bus gets overwhelmed while the drive is connected. Go with a desktop dirve with a separate power supply if you can. If you must go with a USB portable drive lacking its own power supply, also buy a powered USB hub. That usualy provides portable drives with enough power to stay with the program when used at home.

Hey! Can any one recommend a good quality and user friendly external hard drive?

Hey! Can any one recommend a good quality and user friendly external hard drive?

Most reliable/highly recommended are those from Other World Computing (OWC):
http://eshop.macsales.com/

Can any one tell me where do we have to change the Language for Vendor curr

Hello
Can any one tell me where do we have to change the Language for Vendor currerncy?
Is it in the vendor master record or in the Currency settings.
Please tell me the path or Tcode for it.
Best Regards,
Sairam.

hi sai
do you want to change the currency or langauge ?

Good download manager for macbook pro

i am looking for a good download manager for macbook pro, to delay downloads until free zone data use for exede internet service

i am looking for a good download manager for macbook pro, to delay downloads until free zone data use for exede internet service

Can any one suggest a good downloder which work like internet download manager for MacBook

Similar Messages

Maybe you are looking for