Can any one suggest about sapi
hi gurus,
can any one explain,. what is sapi . what for it used.
regards,
praveen
Hi,
The BI Service API (SAPI) is a technology package in the SAP source system that enables the close integration of data transfer from SAP source systems into a BI system.
The SAPI allows you to
● make SAP application extractors available as a basis for data transfer into BI
● carry out generic data extraction
● use intelligent delta processes
● access data in the source system directly from BI (VirtualProvider support)
http://help.sap.com/saphelp_nw04s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
Regards.
Similar Messages
-
Can any one explain about the SAP Testing process in Implementation Project
Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..
hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus -
Can any one suggest me useing right way for using cost centers
Hello Guru's
I am in implementation Projec, The client is in Depote Sales process, i just want to know about the cost cenetr and their importance we are creating 20 different cost centers is it really required to create 20 different cost centers, for integrations with MM And SD should i have to take one cost center per plant for Purcase and Sales related activites are should i have to take different Cost Centers Purcase different and Sales different
Can any one suggest which is the right way to use the cost center for integration
Management 0010 DI10100010
Finance & Accounts 0020 DI10100020
HR and Personnel & Admin 0030 DI10100030
Purchase - Equipment 0040 DI10100040
Purchase - Parts 0050 DI10100050
Purchase - General 0060 DI10100060
Imports 0070 DI10100070
Sales & Marketing - Equipment 0080 DI10100080
Sales & Marketing - Parts 0090 DI10100090
Sales - Miscalenous 0100 DI10100100
Exports 0110 DI10100110
Logistics 0120 DI10100120
Services & Technical 0140 DI10100140
Information Technology & Systems 0150 DI10100150
Warehouse 0160 DI10100160
Workshop 0170 DI10100170
Workshop ( Repairs ) 0180 DI10100180
Production 0190 DI10100190
Internal Audit 0200 DI10100200
Legal 0210 DI10100210
Training & Development 0220 DI10100220
Research & Development 0230 DI10100230
Moderator: Please, read basic SAP material on help.sap.comhi,
my transaction is VL02N change outbound delivery. -
Can any one suggest a good downloder which work like internet download manager for MacBook
Can any one suggest me a downloder which works lo IDM
I have already used flocks etc..Just open your Downloads window on your web browser.
MacBook Pros can't run Mac OS X 10.0.x. Please verify in Apple menu -> About This Mac what Mac OS X version you are using, and update your signature. -
Can any one help about visit planning
Hi SAP Gurus,
can any one knows about visit planning in sapcrm and how we will integrate and without crm also they can plan their visits in ms-outlook
Regards,
reddyas a starter use the following link:http://help.sap.com/saphelp_crm50/helpdata/en/48/7b044017355c0ce10000000a1550b0/frameset.htm
this will give a good overview of the functionality.
hope this helps
RH -
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.
Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support -
I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution
Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?
-
Pls can any one suggest me the Existing Report Name for Active and InActive
Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .hi,
my transaction is VL02N change outbound delivery. -
Can any one suggest me how to use drawPixels method for 40 series devices
Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry. -
New To SOA, can any one suggest how to proceed
Hi All,
I am new to SOA i want to learn basics in SOA. Can any one suggest me how to proceed, I know Web Services.
Thanking You,
Rakesh.Marc made a list of resources too :
http://orasoa.blogspot.com/2007/05/newbie-getting-started-with-oracle-soa.html
the quickstarts are nice to start with too, just to see what the tools can do, how the concepts work etc -
Hi There Can Any one Suggest me Any Discoveror Report?
Hi There,
Can Any one Suggest me Any Discoveror Report with it's name and respective responsibality.
BachanHi William,
I am writting a sample code for you :
go to code wizard, select your node VBAk (where you have the attribute VBLEN )
and select the attribute. Now code will be automatically generated.
DATA LO_ND_VBAk TYPE REF TO IF_WD_CONTEXT_NODE.
DATA LO_EL_VBAk TYPE REF TO IF_WD_CONTEXT_ELEMENT.
DATA LS_VBAk TYPE WD_THIS->ELEMENT_VBAk.
DATA LV_VBLEN TYPE WD_THIS->ELEMENT_VBAk-VBLEN.
navigate from <CONTEXT> to <VBAk> via lead selection
LO_ND_VBAk = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX__VBAk ).
get element via lead selection
LO_EL_VBAk = LO_ND_VBAk ->GET_ELEMENT( ).
alternative access via index
lo_el_VBAk = lo_nd_VBAk ->get_element( index = 1 ).
@TODO handle not set lead selection
IF LO_EL_VBAk IS INITIAL.
ENDIF.
get single attribute
LO_EL_VBAk ->GET_ATTRIBUTE(
EXPORTING
NAME = `VBLEN`
IMPORTING
VALUE = LV_VBLEN ).
Now based on the value LV_VBLEN select values from database table and fill the internal table.
DATA LT_VBAk TYPE WD_THIS->ELEMENTSVBAk. " this the table to keep the values
select VBLEN ERDAT ERNAM AUDAT from VBAK into table LT_VBAk where VBLEN = LV_VBLEN.
Now you can bind the table to appropriate node.
Regards,
Monishankar C -
Can any one suggest a realtime audio recorder for Reaktor in Logic please?
Hi all,
So its been a few days so far with Logic Pro 7 on my new intel Mac, I made the jump from PC land and Nuendo and am trying to get up to speed.
What I am in dire need of is an application that I can use at the same time as Logic to record the output of some granular parts from Raktor5.
Basically I am trying to manually do some tweaks on sounds that I just want to be recorder into audio files and then inport them into logic for further editing.
Can any one make a good suggestion for such a think, or does Logic have something similar to this already built in?
Thank you all in advance for the help and past help I have recieved in this forum.
Cheers!Hi all,
Thanks for the ideas... I went with the recorder box and that solution worked perfect! I used to be on a PC and had a Creamware system that allows for routing of audio any where with as many drivers as you want EG: Asio2, Wave and such at the same time so you could just have (at the time I was using Nuendo3) your DAW up, open an instance of soundforge and start weaking Reaktor ensembles from within your DAW host while recording direct to disk in sound forge with out having to do anything, it worked amazingly well.
This is the next best thing.
Now I just need to spend more time in Logic to learn my way around as I am a new user..
Cheers! -
How can i detect the Firefox the Popup blocker settings by using javascript, so that i can show message to user, saying" popup settings are on, please turn off or allow the site". can any one help me out. Thanks in advance.
Hi William,
I am writting a sample code for you :
go to code wizard, select your node VBAk (where you have the attribute VBLEN )
and select the attribute. Now code will be automatically generated.
DATA LO_ND_VBAk TYPE REF TO IF_WD_CONTEXT_NODE.
DATA LO_EL_VBAk TYPE REF TO IF_WD_CONTEXT_ELEMENT.
DATA LS_VBAk TYPE WD_THIS->ELEMENT_VBAk.
DATA LV_VBLEN TYPE WD_THIS->ELEMENT_VBAk-VBLEN.
navigate from <CONTEXT> to <VBAk> via lead selection
LO_ND_VBAk = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX__VBAk ).
get element via lead selection
LO_EL_VBAk = LO_ND_VBAk ->GET_ELEMENT( ).
alternative access via index
lo_el_VBAk = lo_nd_VBAk ->get_element( index = 1 ).
@TODO handle not set lead selection
IF LO_EL_VBAk IS INITIAL.
ENDIF.
get single attribute
LO_EL_VBAk ->GET_ATTRIBUTE(
EXPORTING
NAME = `VBLEN`
IMPORTING
VALUE = LV_VBLEN ).
Now based on the value LV_VBLEN select values from database table and fill the internal table.
DATA LT_VBAk TYPE WD_THIS->ELEMENTSVBAk. " this the table to keep the values
select VBLEN ERDAT ERNAM AUDAT from VBAK into table LT_VBAk where VBLEN = LV_VBLEN.
Now you can bind the table to appropriate node.
Regards,
Monishankar C -
Can any one suggest an efficient solution to.....
I have the following problem:
I have a long log file of around 5 MB.
I have to write a java code to parse this file. Each message in this file has a log type which is alphanumeric.There are around 100 types of messages and more than 1000 messages.
I have to group the messages on the basis of their log type and write them to an output file so that all messages of same log type are together in the output file.
Can anyone suggest an efficient solution to this problem ?so you need to sort the file? How is the file organized? If messages are stored on individual lines its pretty straight forward. You could buffer the file into a vector then sort the vector. Here's some quick code to buffer a file to a vector.
public static Vector bufferFile(String filename)
Vector bufferedFile = new Vector(0,1);
String message = "default";
try
BufferedReader infile = new BufferedReader(new FileReader(filename));
while(message!=null)
message=infile.readLine().trim();
// ignore blank / empty lines
// could add other filters to remove badly formed messages here
if(message.length()==0 || message.charAt(0)==' ')
// do something / nothing with the garbage messages
else
// add the message to the vector
bufferedFile.addElement(message);
infile.close();
catch(FileNotFoundException e){};
catch(IOException e){};
catch(NullPointerException e){};
return bufferedFile;
}Now you have your Vector, you can use any one of number of sort algorithms to order them how you want, then write a reverse of this method which writes back to a file from a vector, line by line. Hope this helps,
Tom -
How to open .app flash animation in mac and i os. can any one suggest.
I just published one flash animation with interactivity as .app file to open in mac and ios, but its not working.
Kinldy any one please suggest the procedure to open the swf file in mac and ios.
Thanks
DineshHi moccamaximum
thanks for your reply. if publish to AIR for IOs its asking for certificate,..
Thanks
Dinesh.B
Maybe you are looking for
-
Maintain settlement rule for AUC
I am getting following error in T.code AIAB. 'You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.' Anyinputs to resolve would be appreciated. Thanks in anticipation. Regards, Prasad
-
How can I change the language of a block of text
Hi, Working in a bilingual environment, I am constantly switching languages as I write e-mail. Using Mail 3.5, if I forget to change the dictionary language before I start writing, Mail logically marks most words as spelled incorrectly. After having
-
Quality issues with inserted video file
Hello, can anyone help me with a video problem in Captivate 6.1, please! I'm currently working on a Captivate project where I need to include a movie file. I have the same movie in two different formats .mov and .wmv, which are both looking just grea
-
Hi all, I have problem with process flow, when i am deploying process flow it not deployed and i am getting workflow is not properly installed error. where i have to install workflow is it in database(oracle 10g) or in OWB software. Thanks, Kumar.
-
I just finished iOS 5 and Lion updates for all devices. I am using the restrictions setting in iOS so that no one can turn off location services (I realize there are other ways around, but this seems like a good idea to help track a lost/stolen devi