Can any one tell how to modify the PO that is being sent as an email?

Hi,
Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
First of all I would like to know the name of the userexit where this PO is being sent as an email.
It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
Thanks,
Krishna

Eswar,
Thanks for your email.Can you please be bit clear.I am new to this area.
Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
Please give me clear solution.
Thanks,
Krishna

Similar Messages

Can any one tell how to create pivot table

Hi ,
Am trying to create a pivot tabel in the MDM Import Manager. Iam able to see the preview of the pivot table which i want to create. But when i try to click "OK" button, an error message getting displayed like...
"The new table cannot be created because the data source is not updatable.You may need the data source to an updatable format such as Microsoft Access before proceeding".
Due to the above error am not able to create pivot table, plz let me know if any one know how to solve this problem
Thanks & regards
Praveen k

Hi Praveen ,
The solution to your problem is -
The data source must be updateable in order for MDM to
create the new pivot or reverse pivot table. However, you can still
perform the steps leading up to table creation including the preview
even on a data source that is not updateable, so that you can explore
pivoting or reverse pivoting as a transformation option. If you then
decide you want to actually create the new table, convert the data
source into a format that is updateable (such as Microsoft Access) and
perform the pivot or reverse pivot on the new data source.
To create a pivot table, you must identify the source fields that
participate in the pivot, which ones contain metadata and which ones
contain data, which ones must be combined, the one-to-one
correspondence between metadata and data fields and/or field
combinations, and the key field or fields.
To create a pivot table:
1. In the drop-down list of source tables, make sure the table you want to
pivot is the current source table.
2. In the Source Hierarchy tree, select all the field nodes corresponding to
both the metadata fields and the data fields by which you want to pivot.
3. Right-click on one of the nodes and choose Create Pivot Table from the
context menu, or choose Source > Create Pivot Table from the main
menu
4. MDM opens the Create Pivot Table dialog
5. In the Key Fields dual-list drop-down control, move one or more fields
from the Available Fields list to the Selected Fields list to identify the
key fields on which to perform the pivot
6. In the dual-list control of fields, drag-and-drop the data fields from the
Field Values Become Field Names list to the Field Values Become
Field Values list
7. If necessary, select two or more fields in either list that must be
combined into a field combination, and click on the Combine button, or
right-click on one of the fields and choose Combine from the context
menu
8. If necessary, drag-and-drop fields or field combinations within each list
to create the one-to-one correspondence between metadata fields and
data fields.
9. Click on the Preview button to display a preview of the first ten records
of the pivot table
10. When you have verified that the pivot operation you have defined will
have the desired effect, click OK to close the Create Pivot Table dialog.
11. The MDM Import Manager creates a new table named table <Pivot>
in the data source (where table is the name of the original source
table).
12. In the drop-down list of source tables, select the newly created pivot
table on which to perform subsequent import processing.
Hope that helps ...
Regards
Deepak Singh

Can any one tell me what is the full form of this?

hi,
i am runing the SQL Trace in to the database for the session. and i run the query as :
PARSING IN CURSOR #20 len=75 dep=0 uid=58 oct=3 lid=58 tim=14339580839 hv=4009215815 ad='685d5708'
SELECT EMP_NO
FROM EMP WHERE EMP_NAME = :1
END OF STMT
PARSE #20:c=0,e=492,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=14339580833
EXEC #20:c=15625,e=3248,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=14339596641
FETCH #20:c=0,e=226,p=0,cr=15,cu=0,mis=0,r=0,dep=0,og=1,tim=14339599490
what are the full form of this. What i know is this
c---number of times OCI procedure was executed
e---elapsed time in seconds executing
cr--number of buffers gotten in current mode (usually for update)
r---number of rows processed by the fetch or execute call
cu-cpu time in seconds executing
this are the correct. if wrong can anyone tell me what is the full form of this above statement

c = the total CPU time consumed by the Oracle process during the call
e = amount of wall time elapsed during the call
cr = number of Oracle database blocks obtained by the call in consistent mode from buffer cache.
r = number of rows processed.

Can Any one tell me what is the step in calling a function from a *.lib file in Labview application

Hi, I am working on Labview 8.0.
I am trying to communicate to a thrid party HW using the driver file he has provided to me.
The drive file is a *.lib file.
I am unable to call the function from the lib file.
I could get only from a DLL.
Pls help .
Regards
-Patil

patil wrote:
When it is possible in Lab Windows, why calling a function from a static library is prohibited?
I was trying to use Function node, but found that it is only for functions from a DLL file.
Will CIN be useful.?
LabWindows is not the same as LabVIEW. LabVIEW cannot call .lib files. LIB files are intermediary products and you need to use a wrapper DLL that's compatible with the object format of the .lib file. It's as simple as that. LabWindows creates C application and from that perspective is no different than a regular C
compiler. That's why you can call .lib files because that's how .lib
files are used.
A CIN, as pointed out, is something completely different and will not help you.

Can any one tell me what is the master data upload sequence in sap pm...? i am new to sap pm module..

Hi experts,
Please help me to get the sequence for master data upload in sap pm ......

Probably yet another Blog/Document for someone to create..
Here's my offerings:
Finance data: chart of accounts, g/l accounts cost centres, profit centres, activity types, etc
Configuration data
Classes/characteristics
Inspection characteristics
Master Warranties/Permits/Partners/Documents
HR masters
Work centres
Materials
Functional locations
Equipment (serial numbers)
Measurement points/documents
BOMs
Task Lists
Maintenance items/plans
Maintenance plan schedule
Historical orders (if required)
Historical notifications (if required)
Historical Measurement documents (if required)
PeteA

Can Any one tell me what's the purpose of this RSA Function.

The Code is Decompiler From a java class, And I hope to know what's done with the rsaprivatecrtkey.
    static byte[][] a(RSAPrivateCrtKey rsaprivatecrtkey)
        byte abyte0[][];
        int i1;
        int k1;
        abyte0 = new byte[8][0];
        i1 = (i1 = rsaprivatecrtkey.getModulus().bitLength()) + (i1 & 1);
        Object obj = null;
        boolean flag = false;
        k1 = i1 >> 3;
        abyte0[0] = new byte[k1];
        byte abyte1[];
        int j1;
        if((j1 = (abyte1 = rsaprivatecrtkey.getModulus().toByteArray()).length) != k1 + 1) goto _L2; else goto _L1
_L1:
        abyte1;
        true;
        abyte0[0];
        0;
        k1;
          goto _L3
_L2:
        abyte1;
        0;
        abyte0[0];
        k1 - j1;
        j1;
_L3:
        System.arraycopy();
        abyte0[1] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPrivateExponent().toByteArray()).length) != k1 + 1) goto _L5; else goto _L4
_L4:
        abyte1;
        true;
        abyte0[1];
        0;
        k1;
          goto _L6
_L5:
        abyte1;
        0;
        abyte0[1];
        k1 - j1;
        j1;
_L6:
        System.arraycopy();
        k1 = i1 >> 4;
        abyte0[2] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getCrtCoefficient().toByteArray()).length) != k1 + 1) goto _L8; else goto _L7
_L7:
        abyte1;
        true;
        abyte0[2];
        0;
        k1;
          goto _L9
_L8:
        abyte1;
        0;
        abyte0[2];
        k1 - j1;
        j1;
_L9:
        System.arraycopy();
        abyte0[3] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPrimeExponentP().toByteArray()).length) != k1 + 1) goto _L11; else goto _L10
_L10:
        abyte1;
        true;
        abyte0[3];
        0;
        k1;
          goto _L12
_L11:
        abyte1;
        0;
        abyte0[3];
        k1 - j1;
        j1;
_L12:
        System.arraycopy();
        abyte0[4] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPrimeExponentQ().toByteArray()).length) != k1 + 1) goto _L14; else goto _L13
_L13:
        abyte1;
        true;
        abyte0[4];
        0;
        k1;
          goto _L15
_L14:
        abyte1;
        0;
        abyte0[4];
        k1 - j1;
        j1;
_L15:
        System.arraycopy();
        abyte0[5] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPrimeP().toByteArray()).length) != k1 + 1) goto _L17; else goto _L16
_L16:
        abyte1;
        true;
        abyte0[5];
        0;
        k1;
          goto _L18
_L17:
        abyte1;
        0;
        abyte0[5];
        k1 - j1;
        j1;
_L18:
        System.arraycopy();
        abyte0[6] = new byte[k1];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPrimeQ().toByteArray()).length) != k1 + 1) goto _L20; else goto _L19
_L19:
        abyte1;
        true;
        abyte0[6];
        0;
        k1;
          goto _L21
_L20:
        abyte1;
        0;
        abyte0[6];
        k1 - j1;
        j1;
_L21:
        System.arraycopy();
        abyte0[7] = new byte[4];
        if((j1 = (abyte1 = rsaprivatecrtkey.getPublicExponent().toByteArray()).length) <= 4) goto _L23; else goto _L22
_L22:
        abyte1;
        false;
        abyte0[7];
        0;
        4;
          goto _L24
_L23:
        abyte1;
        0;
        abyte0[7];
        4 - j1;
        j1;
_L24:
        System.arraycopy();
        return abyte0;
    }

By the way, I want to learn that if it have to show a mount on the desktop when time machine is backing up?

Can any one tell me what is the size or dimension I have to use to run a android air project.

I know there is like a 800 X 400 pix. for it.
but with the new phones it might have changed to 1920 X 1080

You must download the latest AIR SDK:
Download Adobe AIR SDK
Extract the contents of the .zip file somewhere. After that go into Flash's Help menu and use the "Manage AIR SDK" option. Browse to the location you extracted AIR to and choose that folder. Now you will have a publish target for whatever version you download.
You should continuously check the AIR SDK release notes to see when it was last updated. If you notice a newer point release is out, you should always update.
Adobe AIR Help | Release Notes
For example I just noticed they put out a new version yesterday, Nov 25th, so I need to update myself hehe.
Sorry for the late replies. We all get busy during the holidays!
Note: Every time you update your AIR you should pay attention to the version it is and update your apps XML to reflect that. Right at the top, the namespace in the XML contains the version of AIR SDK used. At the time of this post you should be setting it to 15.0 from whatever it currently is. Flash will let you know that with an error message if you try to export anyhow.

Can any one tell me how to change the current row header in FB1LN tcode

Hi,
can any one tell me how to change the current row header in FB1LN tcode.
I want to show input date also in the layout.
Regards
Mave

Hi
I know two ways:
- transaction obvu: here you can insert new fields, but only if these fields are included in certain table (like BKPF, BSEG, BSIS.....
- if your field isn't included in those table, you have to modify the structure RFPOS and manage it in the BTE 1650. After updating RFPOS you have to run the program RFPOSXEXTEND to update the structure RFPOSXEXT.
Max

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

Can any one tell me how to write the properites files and how to acces

can any one tell me how to write the properites files and how to acces thoose files
plz let me no
thanks in advance

http://www.exampledepot.com/egs/java.util/Props.html

Can any one tell me how to stream the images in flash.

Hello Friends,
i have created a dynamic page flip book with xml, i want to
zoom the images in swf loaded, with streaming, so that user can
preview the image while a good quality image is loading. I wanna
know that how to load a part of large image or swf.
Image effect like :-
http://www.zoomify.com/
Can any one tell me how to stream the images in flash.

On Thu, 17 Apr 2008 05:53:27 +0000 (UTC), "FlashDavil"
<[email protected]> wrote:
>I wanna know that how to load a
>part of large image or swf.
You show a preview and use loadMovie() to load a big file.
You can
create a preloader (progress bar) showing how much part is
loaded,
while user sees the small image. When you achieve 100% tou
show that
big image. What's more?
> Can any one tell me how to stream the images in flash.
What are you talking about is not a "streaming", but
"progressive
download". Images "streaming" is impossible.

Can any one tell me how to attach a pdf file to the mail through workflow

I have a smart which i am able to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

Hi,
To create the task for attachment
Use the BOR SELFITEM and method NOTES_APPEND.
The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
But the TYPE : OBJ.
Similarly using NOTE_DISPLAY method u can display the documents u like.
In any work item u have the facility to attach any atttchment for further circulation .
Attchment @ WORKITEM
1.Click the workitem for which you want to create the attchment
2.Press create attachment
3. Add the attachment u like (PDF)
Reward points for useful answer.
Richard A

Can any one tell me how to remove the 3 buttons at the top of a dialog?

Hi all
Can any one tell me how to remove the 3 buttons at the top of a dialog?
The Close, Minimize and the other I don�t know what you call that one.
Thanks for you time All
Have a great day
Craig

Try http://java.sun.com/docs/books/tutorial/uiswing/components/frame.html#setDefaultLookAndFeelDecorated

Can any one tell me how to include the company logo and some poictures into the Teststand report

1. Can any one tell me how to include the company logo and some pictures into the Teststand report?
2. How to include the waveforms into the report?

http://zone.ni.com/devzone/cda/epd/p/id/3619
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Can any one tell me the exact procedure of how to update XPERIA NEO V to ICS using both PC companion and SUS.

Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.

SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Can any one tell how to modify the PO that is being sent as an email?

Similar Messages

Maybe you are looking for