Can any usb mp3 player/phone connect to an ipad?

what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?

itoikenza wrote:
what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?
No.

Similar Messages

  • Msi usb mp3 player i/o error

    i recently connected my megastick usb mp3 player and windows diaplyed a window that says: the request could not be performed because of an i/o device error. Now i can not store files to my usb mp3 player. How do i fix this problem???

    An I / O error often indicates a read/write problem to the device, oftern ocours more on Harddisk dri'ves. Upgrading the firmware to the player should sort this out, otherwise there may be someting else wrong with the player. For example the player cannot read/write to a specific cluster on the harddisk. But as the player is PSS (i think), (Portable Solid State) then this is a bit odd, but could possibly be the same problem as above , not read/writeing to a specifc sector/cluster of the memory.

  • Can a bluetooth 4.0 phone connect to bluetooth 3.0...

    Can a bluetooth 4.0 phone connect to bluetooth 3.0 headset
    Solved!
    Go to Solution.

    Should not be a problem. Can you be more specific - which phone and which headset ?

  • ITunes tells me there is an update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

    iTunes tells me there is an iOS update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

    I haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
    Here's a description of the update. Not a lot of changes for iPad 1/2.
    iOS 5.1 Software Update
    http://support.apple.com/kb/DL1504
    You can wait a while & update at your convenience.
     Cheers, Tom

  • TS3367 How can I change my facetime phone number on my ipad? my apple id number is correct, but it is still showing up wrong in facetime.

    How can I change my facetime phone number on my ipad? my apple id number is correct, but it is still showing up wrong in facetime.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • How can I get flash player to work on my iPad?

    How can I get flash player to work on my iPad?

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • The equipment:       Iphone 4S 16gb VZW with personal hotspot      Ipad 3 32gb wi-fi only        The issue:     I turn on the personal hotspot on the phone, connect to the ipad over wi-fi or bluetooth and surf the web flawlessly. I turn on the VPN on

    The equipment:
    Iphone 4S 16gb VZW with personal hotspot
    Ipad 3 32gb wi-fi only
    The issue:
    I turn on the personal hotspot on the phone, connect to the ipad over wi-fi or bluetooth and surf the web flawlessly. I turn on the VPN on the ipad and cannot access my work network. I check the IP address of the phone prior to the connection of the VPN and it registers a VZW IP that the phone is supposed to broadcast. I turn the VPN in and the ipad reflects the VPN IP address that I'm trying to connect to back to the phone and THAT is what the phone tries to project. My RMS vendor and our network provider have both been identified as not being the culprit. I've spent about 8 hours on the phone with an IOS Senior Advisor and we are both perplexed by this. He has been gracious enough to maintain daily contact with me and he's forwarded it up to those higher than him.
    This worked back in April of this year and quit working in May or June. That means it worked on IOS5 and quit working IOS 5.
    Anyone else having these issues?

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • Since downloading iTunes 11, can't access iTunes store, phone connects fine. When I try to access store application crashes, any fix?

    Since downloading iTunes 11 cannot connect to iTunes store. Crashes every time whether phone connected or not, any fix??

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • MP3 Player in Connect 8

    The description for the Connect Pro MP3 Player states:
         "--- NOTE: Do not use with Adobe Connect 8 ---"
    Is there any intention of updating this for version 8, or is the capability provided some other way?  I find it nice to have sound in a lobby so participants can set their volume and have found this player to be a good source for this.
    Karl_S

    Yes, it is being updated.  Understand the Pods on the Exchange are developed by partners, customers, and some Adobe employees outside of their normal duties.  These are not supported by Adobe.  So, that being said it will be updated soon.  The Pod is being tested and re-worked for C8 and beyond.
    There is another option that works great:
    1. Launch Apple GarageBand
    2. Create a new project - Podcast
    3. Remove all tracks except the podcast track
    4. Drag and drop music from your iTunes library
    5. Drop them so that each song is one after another on the same track
    6. When done, choose Export Podcast to Disk from the Share menu
    7. Choose the option for MP3 Encoder for the "Compress Using" drop down menu
    8. You will then have a large MP3 file that you can upload to Connect by using Share Document, then select the file, and you will see the player which will sync across all attendees.
    Note of caution: with this method you will see that all attendees regardless of status (Host, Presenter, Attendee) will have control over the pausing and playing of music. That means that if user A in St. Louis hits the pause button, then all attendees will see the music pause.  Solution: Start the music playing, then move a Note pod over the top of the MP3 pod so it is hidden. Only Hosts can then control the music. Another option might be the presenter only area.
    This works quite well because Adobe Connect natively supports uploading MP3 files.
    Enjoy!

  • Mount usb mp3 player

    Having some probs mount my mp3 player.
    Dmesg gives this:
    usb 1-1: new full speed USB device using uhci_hcd and address 6
    usb 1-1: device descriptor read/all, error -71
    lsmod gives this:
    usb_storage            62272  0
    usbserial              25576  0
    usbcore               100484  5 usb_storage,ndiswrapper,uhci_hcd,usbserial
    ide_core              102864  29 usb_storage,ide_floppy,ide_cd,ide_disk,via82cxxx,
        trm290,triflex,slc90e66,sis5513,siimage,serverworks,
        sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,
        it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,
        cmd64x,atiixp,amd74xx,alim15x3,aec62xx
    Any ideas. Thanks in advance.

    jaboua wrote:
    briancurtin wrote:what is in your fstab file?
    That doesn't matter if the kernel reports device problems
    I didn't think so either but here it is anyway:
    # /etc/fstab: static file system information
    # <file>        <dir>         <type>    <options>          <dump> <pass>
    none                   /dev/pts      devpts    defaults            0      0
    none                   /dev/shm      tmpfs     defaults            0      0
    /dev/cdrom             /mnt/cd   iso9660   ro,user,noauto,unhide   0      0
    /dev/dvd               /mnt/dvd  udf       ro,user,noauto,unhide   0      0
    /dev/fd0               /mnt/fl   vfat      user,noauto             0      0
    /dev/hda3 / ext3 defaults 0 1
    /dev/hda1 /boot ext2 defaults 0 1
    /dev/hda2 swap swap defaults 0 0

  • How do I make bootable USB mp3 player/flash disk?

    hi
    i have a big problem. less than a month ago i have backed up my computer using the latest version of Norton ghost v10.0. i then burned the data on to a DVD and i kept it safe. today i encountered a problem i could not cess the internet on my laptop, nor uninstall/install a program, nor get access to help and support. therefore i got the backup DVD inserted it into the DVD drive i opened Norton ghost clicked recovery and then clicked recover my computer. i told it where to look for the backup and then started restore but i then ran into an error message which says the below:
    cannot complete the restore of recovery point d:\Toshiba ghost image001.v2i
    -Error EC8F178F: Cannot complete the restore of recovery point: D:\Toshiba ghost image001.v2i.
    --Error EC8F03F1: Cannot open recovery point 'D:\Toshiba ghost image001.v2i'.
    ---Error EBAB03E9: Internal Application Error: Memory Access Violation c0000005: Application tried to read memory at 034bac3c.
    i have another way of restoring the data this is by making a mp3 player or flash disk boot the computer but on the flash disk there will be the operating system. is there any way to make the flash disk bootable.
    i would like to know this because if it boots up from the flash disk or mp3 i can then delete the contents on the HDD and restore the data.
    and also when trying to restore it says a file or program is using the file its trying to restore.
    can somebody help,
    regards

    Hello Samee
    The best way to boot the unit in DOS mode is to use external floppy drive. This drive is not expensive and if your data are so important you can invest a few euros to buy it. Using start disk you will be able to boot into DOS mode and do what you want to do.
    I also recommend you to contact Norton and see if they have some simply solution how to install created image.
    With mp3 player you will not be able to boot up.

  • USB MP3 Player (MPman f50)

    Hi all,
    I've downloaded a program to upload MP3's to my MpMan f50, called mplinuxman.
    However, when I start it up, it says it can't find my USB mpman. Do I have to do something special to get USB working on my system?
    This is what dmesg gives my about USB:
    [root@evelien bin]# dmesg | grep -i usb
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    USB Universal Host Controller Interface driver v2.2
    uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    [root@evelien bin]#

    Aha, I was using 2.6.9 and the USB module wasn't loaded.
    Now for another problem, my USB device does not show up in /dev. Altough it's not a problem, I can access my mp3 mplayer fine with mplinuxman, but only as root.

  • USB MP3 Player

    Recently I buyed a MP3 Player and Arch (with KDE SC) not mount or give access to the device.
    lsusb shows this ID: 1234:5678 Unknow
    I try to mount the device but it's not working...

    ouput:
    00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
            Subsystem: ASRock Incorporation Device 2570
            Flags: bus master, fast devsel, latency 0
            Memory at f8000000 (32-bit, prefetchable) [size=64M]
            Capabilities: <access denied>
            Kernel driver in use: agpgart-intel
            Kernel modules: intel-agp
    00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
            Flags: bus master, 66MHz, fast devsel, latency 32
            Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
            I/O behind bridge: 0000a000-0000afff
            Memory behind bridge: ff000000-ff0fffff
            Prefetchable memory behind bridge: b7f00000-f7efffff
            Kernel modules: shpchp
    00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
            Flags: fast devsel
            Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
    00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
            Subsystem: ASRock Incorporation Device 24d0
            Flags: bus master, medium devsel, latency 0, IRQ 16
            I/O ports at e000 [size=32]
            Kernel driver in use: uhci_hcd
            Kernel modules: uhci-hcd
    00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
            Subsystem: ASRock Incorporation Device 24d0
            Flags: bus master, medium devsel, latency 0, IRQ 19
            I/O ports at e400 [size=32]
            Kernel driver in use: uhci_hcd
            Kernel modules: uhci-hcd
    00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])                                                   
            Subsystem: ASRock Incorporation Device 24d0                                 
            Flags: bus master, medium devsel, latency 0, IRQ 18                         
            I/O ports at e800 [size=32]                                                 
            Kernel driver in use: uhci_hcd                                             
            Kernel modules: uhci-hcd                                                   
    00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
            Subsystem: ASRock Incorporation Device 24d0
            Flags: bus master, medium devsel, latency 0, IRQ 16
            I/O ports at ec00 [size=32]
            Kernel driver in use: uhci_hcd
            Kernel modules: uhci-hcd
    00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
            Subsystem: ASRock Incorporation Device 24d0
            Flags: bus master, medium devsel, latency 0, IRQ 23
            Memory at ff27fc00 (32-bit, non-prefetchable) [size=1K]
            Capabilities: <access denied>
            Kernel driver in use: ehci_hcd
            Kernel modules: ehci-hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
            Flags: bus master, fast devsel, latency 0
            Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
            I/O behind bridge: 0000b000-0000bfff
            Memory behind bridge: ff100000-ff1fffff
            Kernel modules: shpchp
    00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
            Flags: bus master, medium devsel, latency 0
            Kernel modules: intel-rng, iTCO_wdt
    00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
            Subsystem: ASRock Incorporation Device 24d0
            Flags: bus master, medium devsel, latency 0, IRQ 18
            I/O ports at 01f0 [size=8]
            I/O ports at 03f4 [size=1]
            I/O ports at 0170 [size=8]
            I/O ports at 0374 [size=1]
            I/O ports at fc00 [size=16]
            Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
            Kernel driver in use: ata_piix
            Kernel modules: ata_piix
    00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
            Subsystem: ASRock Incorporation Device 24d1
            Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
            I/O ports at d400 [size=8]
            I/O ports at d000 [size=4]
            I/O ports at cc00 [size=8]
            I/O ports at c800 [size=4]
            I/O ports at c400 [size=16]
            Kernel driver in use: ata_piix
            Kernel modules: ata_piix
    00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
            Subsystem: ASRock Incorporation Device 24d0
            Flags: medium devsel, IRQ 17
            I/O ports at 0400 [size=32]
            Kernel driver in use: i801_smbus
            Kernel modules: i2c-i801
    00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
            Subsystem: ASRock Incorporation Device 9761
            Flags: bus master, medium devsel, latency 0, IRQ 17
            I/O ports at d800 [size=256]
            I/O ports at dc00 [size=64]
            Memory at ff27f800 (32-bit, non-prefetchable) [size=512]
            Memory at ff27f400 (32-bit, non-prefetchable) [size=256]
            Capabilities: <access denied>
            Kernel driver in use: snd_intel8x0
            Kernel modules: snd-intel8x0
    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] (prog-if 00 [VGA controller])
            Subsystem: ASUSTeK Computer Inc. A9550GE/TD
            Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
            Memory at e0000000 (32-bit, prefetchable) [size=256M]
            I/O ports at a800 [size=256]
            Memory at ff0f0000 (32-bit, non-prefetchable) [size=64K]
            Expansion ROM at ff0c0000 [disabled] [size=128K]
            Capabilities: <access denied>
            Kernel driver in use: radeon
            Kernel modules: radeonfb, radeon
    01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary)
            Subsystem: ASUSTeK Computer Inc. A9550GE/TD (Secondary)
            Flags: bus master, 66MHz, medium devsel, latency 32
            Memory at d0000000 (32-bit, prefetchable) [size=256M]
            Memory at ff0e0000 (32-bit, non-prefetchable) [size=64K]
            Capabilities: <access denied>
    02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
            Subsystem: ASRock Incorporation Device 8139
            Flags: bus master, medium devsel, latency 32, IRQ 22
            I/O ports at b800 [size=256]
            Memory at ff1ffc00 (32-bit, non-prefetchable) [size=256]
            Capabilities: <access denied>
            Kernel driver in use: 8139too
            Kernel modules: 8139too, 8139cp

  • Can't browse store without phone connected

    Why Can't I access without the phone connected to the computer?  Not being able to do this guarantees that I will never purchase apps, music, etc. from Nokia as I will only hook up my phone if there is something I want.

    Can you provide more details ? May sound silly but...Is your PC connected to Internet and have you sign-in in the Nokia Suite ?
    No issues here as seen in the attachment ...
    Else, you may browse here ..
    Attachments:
    Nokia Suite - Nokia Store.png ‏220 KB

  • I have Apple ID for using iTunes, but haven't signed in. Now my Ipad stolen, how can I use Find My Phone for finding my Ipad?

    Who can help me, to add my Ipad to Deviecs in Find My Phone. I was usually using my Ipad sign in iTunes for download music, but haven't signed in iCloud yet. Now my I Ipad stolen, how can I use Find My Phone?

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
    If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

Maybe you are looking for