Can any1 pls guide me wid eficient mobile simulator to carry out ma project
Actually v r bout to start a proj based on mobile technology,as our group members r building t on java so can any1 guide us wid some well known simulator..
Saish wrote:
Maybe the OP sent it via SMS? :^)You can make forum posts via SMS?! Messaging phones: 1, Smartphones: 0.
Since I'm not up to speed on my Xzibit-speech, not exactly sure what the OP means...but if he's looking to send text messages to a Java app and then do something, the only experience I've had was sending a text message to an e-mail, and treating the SMS message as though it were an e-mail, and using java to parse it for relevant information. I haven't tried sending a response back, but the return address should be contained within the original message.
Similar Messages
-
How can SAP tRFC server tell client through JCo that function carried out?
SAPs "Transactional RFC Technical Description" document (release 4.0) says in section Transactional RFC on page 6: "Finally, the server tells the client, that the function has been carried out and the client acknowledges this.".
How can the server tell this to the client when the server communicates with the client through JCo (Java Connector)?System.out.println goes to console, which is not a file... This whole thing is much easier if you use standard logging:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm -
Hi there can any1 pls help..??
i have an ipod 2g 8g, it no-longer connects to itunes & also is not recognized when connected in the usb port. I have tried many times to reset the device by pressing & holding the home & power button.. No app's are displayed on the screen it just displays a picture of a usb cable & the itunes circle, when it does attempt to re boot i do get a pic of the apple but nothing else..!!??? has any1 ever experience this & been successful in a repair...??? thank you for you time
kind regardsSee:
Guide to restoring your iPod Touch 2G | Reset and unfreeze iPod Touch
Reset iPod Touch -
Hi! can any1 pls let me know how to create a look up table in labview and use that in the vi.
hello !
i have no idea how to build a lookup table(as v use in microcontroller) in labview and use that in vi.pls help me
txs
nitin
Solved!
Go to Solution.If the lookup table is always going to remain the same (e.g. a character generator or something similar) you can place the values in a 2D array constant on your diagram, with the input value as one column, the equivalent as the other. When you need to perform the lookup you use an index array to return all the values in the "input column", search it using "search 1D array" and use the resulting index number to index the other column's data. If the values may change, then it would probably be best to load an array control with your equivalent values from a file.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Blogging-Can you pls guide me to some resouces for custom etc...
Hi All.
I'd like to really customize iWeb Blog to have such things as sides of information, catagories on the sides, picture placement etc.... A lot of people have done it so I thougt some peeps here may be able to guide me to some good resources.....
Thanks tons and good nite.
TomHi Rag,
Goto Design > Tables tab and right clik on any of the table and select Import from Database > select Import database tables option.
In the pop up select the datasource of your target DB and enter the part of the table name like 'w%' and click on Read tables option, It will populate all the tables in the tablelist.
Once the above step is done and click on tables you need for importing or select All if you need to import all the tables and click on import tables option.
Once the above steps are done click on save button. Goto Tasks tab and select the required task and in the below panel goto Source tab > click on Add/Remove button and add your source tables in source tab and target tables in the target tab.
Hope this helps...........
Thanks,
Navin Kumar Bolla
Edited by: Navin Kumar Bolla on May 9, 2011 9:59 PM -
Hello,
I'm doing project which requires pneumatic actuator. Available actuator in our college is REXROTH BOSCH pnuematic actuator. which requires 24V and 500mA drive. Also it has to be timing controlled (I mean it should be ON & OFF, software controlled)
I have attached snap of my LabVIEW block diagram. Here, comparator output has to drive Pneumatic actuator. Also we have NI 9485, 8 channel Solid State Relay (SSR), is it possible to use it in my project?
Thank you, your help is much appreciated...
Attachments:
ni help.jpg 35 KBI apologize for my mistake,
I'm new to this community...
Image which I've tagged , contains 2 O/Ps from comparator.. I need to drive actuator from those O/Ps...
After processing Image & calculating number of particles, depending upon those numbers, i want to drive Actuator which i've specified earlier...
thank you for your time... help appreciated... -
Hi all its anir again...pls guide me the updating process OTA in my iphone 5 ..as i forgot the password..and find my phone is on..n dont hv icloud password...can i update it to ios 8 widout icloud password. ...
N tes can i reset it..without the password you have a brick not an iPhone.
-
Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issue.
Log in to icloud.com on a web browser and remove the device from "Find My iPhone"
-
Hi guys can someone pls help! im gg crazy...
Hi guys can someone pls help! im gg crazy... im doing this java prograamming project and cant seem to work the Search function. My program compiles well and runs, but after i key in the details for "Add new customer" , and i attempt to search the customer name that i keyed in, the program does not return my input! My teacher says its something to do with assigning an array length or something but how do i code that.... Heres the code, pls try to help..
import java.io.*;
public class shop
static String Name, Address,Gender,Country,Pdtname,Type,Dob,
Hometel,Mobile,Purchase,ID,Cost,Quantity,Introdate;
static int x;
public static void main(String[] args) throws Exception
char choice;
do{
System.out.println("MAIN MENU");
System.out.println("(1). Add New Customer");
System.out.println("(2). Search Customer");
System.out.println("(6). Quit");
System.out.print("Pls. enter a choice :");
choice = Character.toUpperCase((char)System.in.read());
System.in.read();
System.in.read();
switch(choice)
case '1':Add();
break;
case '2':Search();
break;
case '6':Quit();
break;
default:System.out.println("- Sorry, You have entered an invalid option, please try again -");
}while(choice != '6');
public static void Add()throws Exception
BufferedReader data=new BufferedReader
(new InputStreamReader(System.in));
String Name, Dob, Hometel, Mobile, Country, Purchase;
boolean valid;
int x;
valid=true;
do
System.out.print("Please enter Customer's Name:");
Name=data.readLine();
if (Name.equals(""))
System.out.println("Name must not be empty");
else
for (x=0; x<Name.length();x++)
if(!(Character.isLetter(Name.charAt(x))) && Name.charAt(x) !=' ')
System.out.println("Please enter letters only[A-Z] ");
valid=false;
break;
else
valid=true;
}while (!valid || Name.equals(""));
do{
System.out.print("Please enter Customer's Address:");
Address=data.readLine();
if (Address.equals(""))
System.out.println("Address must not be empty");
}while (Address.equals(""));
do{
System.out.print("Please enter Customer's Gender (M/F):");
Gender=data.readLine();
if (!Gender.equalsIgnoreCase("M") && !Gender.equalsIgnoreCase("F"))
System.out.println("Please input either M or F");
else
if (Gender.equals(""))
System.out.println("Gender must not be empty");
}while (!Gender.equalsIgnoreCase("M") && !Gender.equalsIgnoreCase("F") || Gender.equals(""));
do
System.out.print("Please enter Customer's Date of Birth (dd/mm/yyyy):");
Dob=data.readLine();
if (Dob.equals(""))
System.out.println("Dob must not be empty");
else
for (x=0; x<Dob.length();x++)
if(!(Character.isDigit(Dob.charAt(x))) && Dob.charAt(x) !='/')
System.out.println("Please enter only numbers in dd/mm/yyyy format");
valid=false;
break;
else
valid=true;
}while (!valid || Dob.equals(""));
do
System.out.print("Please enter Customer's Contact no(Home):");
Hometel=data.readLine();
if (Hometel.equals(""))
System.out.println("Home number must not be empty");
else
for (x=0; x<Hometel.length();x++)
if(!(Character.isDigit(Hometel.charAt(x))) && Hometel.charAt(x) !=' ')
System.out.println("Please enter numbers only [0-9] ");
valid=false;
break;
else
valid=true;
}while (!valid || Hometel.equals(""));
do
System.out.print("Please enter Customer's Contact no(Mobile):");
Mobile=data.readLine();
if (Mobile.equals(""))
System.out.println("Mobile number must not be empty");
else
for (x=0; x<Mobile.length();x++)
if(!(Character.isDigit(Mobile.charAt(x))) && Mobile.charAt(x) !=' ')
System.out.println("Please enter numbers only [0-9] ");
valid=false;
break;
else
valid=true;
}while (!valid || Mobile.equals(""));
do
System.out.print("Please enter Customer's Country:");
Country=data.readLine();
if (Country.equals(""))
System.out.println("Country must not be empty");
else
for (x=0; x<Country.length();x++)
if(!(Character.isLetter(Country.charAt(x))) && Country.charAt(x) !=' ')
System.out.println("Please enter letters only[A-Z] ");
valid=false;
break;
else
valid=true;
}while (!valid || Country.equals(""));
public static void Search()throws Exception
BufferedReader data=new BufferedReader
(new InputStreamReader(System.in));
String target;
boolean found;
found=false; //record not found
System.out.print("Enter the name that you want to search:");
target=data.readLine();
if (target.equalsIgnoreCase(Name))
System.out.println("The customer's name is "+Name);
System.out.println("The customer's address is "+Address);
System.out.println("The customer's gender is "+Gender);
System.out.println("The customer's date of birth is "+Dob);
System.out.println("The customer's home contact number is "+Hometel);
System.out.println("The customer's mobile number is "+Mobile);
System.out.println("The customer's Country is "+Country);
System.out.println("Record found");
found=true; //record found
if (found==false)
System.out.println("Record not found");
public static void Quit()
System.out.println("Thank You For Using Database Application System Designed For Crystalodge Gift Shop");
}Thank you for your interest in just plopping down your code and asking for someone to just fix it for you. We'll get right on it...
-
Pls guide me choosing suitable certification
hello to all of you
i need your help and advice i am a student of masters(masters in commerce).its
going to finished in 7 to 8 month basically i want to enter in the
field of oracle i am totally new in this field i want to do
certification of oracle which is related to my commerce back ground or
which is world wide acceptable which has a great worth my intrest in
commerce are management,accpunting,finance
pls guide me to chose a right path
anxiously waiting for your response
thanksYour background and your post indicate that you want to be a 'functional developer' or 'functional dba'. Therefore you should look at the certifications on this page. Review the possibilities, and pick an area of interest.
Please do not ask us to decide your future career path for you. It's your future, and making such decisions for life is not easy. It's more than just reading - you need to spend time thinking about what these things mean to you.
As for getting an educational start in those area ... that is an interesting question. 99% of the people I meet who are Functional DBAs or Functional developers fell into it by accident. They ended up 'attached' to a project, and demonstrated some interest and skill in the area. And they ended up taking some vendor's [Oracle, Siebel, SAP, Peoplesoft, JD Edwards, etc] 'Functional' training, such as those found at http://education.oracle.com in the 'E-Business Suite', 'JD Edwards', 'Peoplesoft', 'Siebel' categories
I do know that consultancies are keeping an eye open for people with your background.
The best suggestion I have for you is to find a local user group and talk to people in your area. One place to start is http://www.oaug.org/ -
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
Can someone pls help me with this code
The method createScreen() creates the first screen wherein the user makes a selection if he wants all the data ,in a range or single data.The problem comes in when the user makes a selection of single.that then displays the singleScreen() method.Then the user has to input a key data like date or invoice no on the basis of which all the information for that set of data is selected.Now if the user inputs a wrong key that does not exist for the first time the program says invalid entry of data,after u click ok on the option pane it prompts him to enter the data again.But since then whenever the user inputs wrong data the program says wrong data but after displaying the singlescreen again does not wait for input from the user it again flashes the option pane with the invalid entry message.and this goes on doubling everytime the user inputs wrong data.the second wrong entry of data flashes the error message twice,the third wrong entry flashes the option pane message 4 times and so on.What actually happens is it does not wait at the singlescreen() for user to input data ,it straight goes into displaying the JOptionPane message for wrong data entry so we have to click the optiion pane twice,four times and so on.
Can someone pls help me with this!!!!!!!!!
import java.util.*;
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.*;
public class MainMenu extends JFrame implements ActionListener,ItemListener{
//class
FileReaderDemo1 fd=new FileReaderDemo1();
FileReaderDemo1 fr;
Swing1Win sw;
//primary
int monthkey=1,counter=0;
boolean flag=false,splitflag=false;
String selection,monthselection,dateselection="01",yearselection="00",s,searchcriteria="By Date",datekey,smonthkey,invoiceno;
//arrays
String singlesearcharray[];
String[] monthlist={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sept","Oct","Nov","Dec"};
String[] datelist=new String[31];
String[] yearlist=new String[100];
String[] searchlist={"By Date","By Invoiceno"};
//collection
Hashtable allinvoicesdata=new Hashtable();
Vector data=new Vector();
Enumeration keydata;
//components
JButton next=new JButton("NEXT>>");
JComboBox month,date,year,search;
JLabel bydate,byinvno,trial;
JTextField yeartext,invtext;
JPanel panel1,panel2,panel3,panel4;
JRadioButton single,range,all;
ButtonGroup group;
JButton select=new JButton("SELECT");
//frame and layout declarations
JFrame jf;
Container con;
GridBagLayout gridbag=new GridBagLayout();
GridBagConstraints gc=new GridBagConstraints();
//constructor
MainMenu(){
jf=new JFrame();
con=getContentPane();
con.setLayout(null);
fr=new FileReaderDemo1();
createScreen();
setSize(500,250);
setLocation(250,250);
setVisible(true);
//This is thefirst screen displayed
public void createScreen(){
group=new ButtonGroup();
single=new JRadioButton("SINGLE");
range=new JRadioButton("RANGE");
all=new JRadioButton("ALL");
search=new JComboBox(searchlist);
group.add(single);
group.add(range);
group.add(all);
single.setBounds(100,50,100,20);
search.setBounds(200,50,100,20);
range.setBounds(100,90,100,20);
all.setBounds(100,130,100,20);
select.setBounds(200,200,100,20);
con.add(single);
con.add(search);
con.add(range);
con.add(all);
con.add(select);
search.setEnabled(false);
single.addItemListener(this);
search.addActionListener(new MyActionListener());
range.addItemListener(this);
all.addItemListener(this);
select.addActionListener(this);
public class MyActionListener implements ActionListener{
public void actionPerformed(ActionEvent a){
JComboBox cb=(JComboBox)a.getSource();
if(a.getSource().equals(month))
monthkey=((cb.getSelectedIndex())+1);
if(a.getSource().equals(date)){
dateselection=(String)cb.getSelectedItem();
if(a.getSource().equals(year))
yearselection=(String)cb.getSelectedItem();
if(a.getSource().equals(search)){
searchcriteria=(String)cb.getSelectedItem();
public void itemStateChanged(ItemEvent ie){
if(ie.getItem()==single){
selection="single";
search.setEnabled(true);
else if (ie.getItem()==all){
selection="all";
search.setEnabled(false);
else if (ie.getItem()==range){
search.setEnabled(false);
public void actionPerformed(ActionEvent ae){
if(ae.getSource().equals(select))
if(selection.equals("single")){
singleScreen();
if(selection.equals("all"))
sw=new Swing1Win();
if(ae.getSource().equals(next)){
if(monthkey<9)
smonthkey="0"+monthkey;
System.out.println(smonthkey+"/"+dateselection+"/"+yearselection+"it prints this");
allinvoicesdata=fr.read(searchcriteria);
if (searchcriteria.equals("By Date")){
System.out.println("it goes in this");
singleinvoice(smonthkey+"/"+dateselection+"/"+yearselection);
else if (searchcriteria.equals("By Invoiceno")){
invoiceno=invtext.getText();
singleinvoice(invoiceno);
if (flag == false){
System.out.println("flag is false");
singleScreen();
else{
System.out.println("its in here");
singlesearcharray=new String[data.size()];
data.copyInto(singlesearcharray);
sw=new Swing1Win(singlesearcharray);
public void singleinvoice(String searchdata){
keydata=allinvoicesdata.keys();
while(keydata.hasMoreElements()){
s=(String)keydata.nextElement();
if(s.equals(searchdata)){
System.out.println(s);
flag=true;
break;
if (flag==true){
System.out.println("vector found");
System.exit(0);
data= ((Vector)(allinvoicesdata.get(s)));
else{
JOptionPane.showMessageDialog(jf,"Invalid entry of date : choose again");
public void singleScreen(){
System.out.println("its at the start");
con.removeAll();
SwingUtilities.updateComponentTreeUI(con);
con.setLayout(null);
counter=0;
panel2=new JPanel(gridbag);
bydate=new JLabel("By Date : ");
byinvno=new JLabel("By Invoice No : ");
dateComboBox();
invtext=new JTextField(6);
gc.gridx=0;
gc.gridy=0;
gc.gridwidth=1;
gridbag.setConstraints(month,gc);
panel2.add(month);
gc.gridx=1;
gc.gridy=0;
gridbag.setConstraints(date,gc);
panel2.add(date);
gc.gridx=2;
gc.gridy=0;
gc.gridwidth=1;
gridbag.setConstraints(year,gc);
panel2.add(year);
bydate.setBounds(100,30,60,20);
con.add(bydate);
panel2.setBounds(170,30,200,30);
con.add(panel2);
byinvno.setBounds(100,70,100,20);
invtext.setBounds(200,70,50,20);
con.add(byinvno);
con.add(invtext);
next.setBounds(300,200,100,20);
con.add(next);
if (searchcriteria.equals("By Invoiceno")){
month.setEnabled(false);
date.setEnabled(false);
year.setEnabled(false);
else if(searchcriteria.equals("By Date")){
byinvno.setEnabled(false);
invtext.setEnabled(false);
monthkey=1;
dateselection="01";
yearselection="00";
month.addActionListener(new MyActionListener());
date.addActionListener(new MyActionListener());
year.addActionListener(new MyActionListener());
next.addActionListener(this);
invtext.addKeyListener(new KeyAdapter(){
public void keyTyped(KeyEvent ke){
char c=ke.getKeyChar();
if ((c == KeyEvent.VK_BACK_SPACE) ||(c == KeyEvent.VK_DELETE)){
System.out.println(counter+"before");
counter--;
System.out.println(counter+"after");
else
counter++;
if(counter>6){
System.out.println(counter);
counter--;
ke.consume();
else
if(!((Character.isDigit(c) || (c == KeyEvent.VK_BACK_SPACE) || (c == KeyEvent.VK_DELETE)))){
getToolkit().beep();
counter--;
JOptionPane.showMessageDialog(null,"please enter numerical value");
ke.consume();
System.out.println("its at the end");
public void dateComboBox(){
for (int counter=0,day=01;day<=31;counter++,day++)
if(day<=9)
datelist[counter]="0"+String.valueOf(day);
else
datelist[counter]=String.valueOf(day);
for(int counter=0,yr=00;yr<=99;yr++,counter++)
if(yr<=9)
yearlist[counter]="0"+String.valueOf(yr);
else
yearlist[counter]=String.valueOf(yr);
month=new JComboBox(monthlist);
date=new JComboBox(datelist);
year=new JComboBox(yearlist);
public static void main(String[] args){
MainMenu mm=new MainMenu();
public class WindowHandler extends WindowAdapter{
public void windowClosing(WindowEvent we){
jf.dispose();
System.exit(0);
}Hi,
I had a similar problem with a message dialog. Don't know if it is a bug, I was in a hurry and had no time to search the bug database... I found a solution by using keyPressed() and keyReleased() instead of keyTyped():
private boolean pressed = false;
public void keyPressed(KeyEvent e) {
pressed = true;
public void keyReleased(KeyEvent e) {
if (!pressed) {
e.consume();
return;
// Here you can test whatever key you want
//...I don't know if it will help you, but it worked for me.
Regards. -
Restored it from a backup and now there's no music on it. In the music tab it iTunes says: Thomas iPhone has access to music on iCloud. Songs can be fetched via WIFI or a mobile network. The pnly thing I can chose to sync are voice memos.
What can I do?If you want all the songs from an artist on your phone you can to to the artist view, tap on the artist, scroll to the bottom of the list and you will see a Download All button. This works for playlists and albums too (scroll to the bottom and tap the Download All button). I suppose if you wanted all your music on your phone you could create a smart playlist in iTunes on your computer that would contain all your music, upload it to iTunes match (Store>Update iTunes Match), and then you would get a Download All button at the bottom of this playlist on your phone to download all your songs.
-
This phone can not be used because the apple mobile device service is not started
i plug my iphone into my computer and the message this phone can not be used because the apple mobile device service is not started pops up and wont let me download any music onto my phone. what can i do to make that stop happening?
See Here
http://support.apple.com/kb/TS1567 -
How can I print with a wider left margin in Preview? (OSX 10.5)
How can I print with a wider left margin in Preview? (OSX 10.5)
To punch Binder Holes.
Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
Info so far:
Found an older post from 2002 ... "Make a custom page"
Mac Help has a limited, simple, incomplete answer: "Make a custom page"
Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
Printing a PDF from Preview
MacBook Pro
OSX 10.5.6
Thanks
PeterThanks ... tried the Paper Handling, but no lock.
Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
Th only "work around" solution is to ...
Rotate the PDF page 180, then scale slightly (90% or so ...)
This pushes the upside down page, down and to the left.
While this is the opposite of what is desired, the print is then correct when
it is punched and placed into a three ring binder.
Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
ie: In Preview, Custom Page does not work correctly,
Thanks allfor the comments and help ...
Maybe you are looking for
-
Novice Help with Creating Opportunities Using Web Services 2.0
Hello, I recently took over our CRM integration services and was asked to push some data via our custom portal. We use our portal to automate the creation of new opportunities in our Oracle CRM System. The code was developed using Web Services 1.0 I
-
Reading hierarchies when running in background.
Currently we have an abap that captures the hierarchy information via the function K_HIERARCHY_TABLES_READ. We then use the results to collect additional data. The report works in the foreground but gets different results when running in the backgr
-
Hello all, one question: I have a report region. In one column a value is several times among each other. What can I do, the same values display only one time? Thanks a lot! Regards Daniel
-
How to show all privileges from a view?
Hi. I´m new to PL/SQL developing. So I have two questions: Is there a sql statement that shows me all privileges the actual user have of a view? Or can I show all views where the actual user can do a select? Thanks for help.
-
MOVED: Re: Improvement & Suggestions
This topic has been moved to MSI Notebooks & Netbooks. https://forum-en.msi.com/index.php?topic=163389.0