Can anybodt tell me..what ITOB_SERIALNO_MODIFY_SINGLE this FM does do?
Hi All,
Can anybody tell me what,ITOB_SERIALNO_MODIFY_SINGLE this FM exatly does do?
IF possible plz exaplin the parameters which need to pass to this...(if possible sample cod also)
It's very urgent...
Thnx in advance.
Hi Sanjay,
here is the documentation for the FM mentioned below
ITOB_SERIALNO_MODIFY_SINGLE
FU ITOB_SERIALNO_MODIFY_SINGLE
Short text
ITOB Buffer RFC: Change Individual Serial Number
Functionality
This RFC-capable function module enables you to change master data for an individual serial number without using a dialog.
Notes
General notes for the RFCs for processing individual technical objects (function group ITO3):
The master data is communicated in an interface structure (based on view ITOB) that is generally used for technical objects.
Each RFC returns the processed data in the structure E_OBJECT_REC to the the caller, independent of the action that is to be performed (create/change/read).
An RFC for creating or changing master data generally receives this data in the structure E_OBJECT_REC. However, depending on the object to be processed, only part of the data is processed, namely:
Create functional location: Processes data from structure ITOBAPI_CREATE_FL
Change functional location: Processes data from structure ITOBAPI_MODIFY_FL
Create equipment: Processes data from structure ITOBAPI_CREATE_EQ
Change equipment: Processes data from structure ITOBAPI_MODIFY_EQ
You specify whether an authorization check should be performed when executing the create or change transaction using the optional parameter I_AUTH_TCODE (default: without check).
You specify whether the data should updated using the optional parameter I_POST_BUFFER (default: update data).
You specify whether the (updated) data is written to the database per Commit using the optional parameter I_COMMIT_WORK (default: no Commit).
In Customizing (Field Selection) for master data dialogs, entries defined as manadatory are generally not checked by the RFCs.
Special notes on function module ITOB_SERIALNO_MODIFY_SINGLE:
The parameter I_TRANSFER_MODE controls whether inheritance-relevant fields should be transferred to installed pieces of equipment.
The system uses the structure I_OBJECT_REC_OLD to make 'Before Image' data available to the user. If the structure is not transferred, the 'Before Image' is read by the module.
Please go through the documentation and hope that you will able to resolve how the FM works out.
Thanks
Venugopal
Please reward for the ample info.
Similar Messages
-
HELP!! Can anyone tell me what causes this problem?
I will paste a link below to a screen grab I took of my desktop. I've never seen this before. Could you please tell me what this could be? The best way I could describe it is to describe it as warping effect on various windows.
This has occurred when using photoshop, after effect, illustrator, the OS. Basically I've seen it occur on just about every type of browse window viewable on the Mac.
I reformatted the mac and it still occurs.
I am using a MacPro 2 x 3 GHz Quad Core with 16 GB of RAM, and an NVIDIA Quadro FX 4500. I have an internal 750 GB HD for the OS and 4x750 GB internal RAID for storage. (I do a lot of video work.)
Here's the link:
http://i87.photobucket.com/albums/k142/semilion/02-7.jpg
Thanks,
Daniel
PS> Even if you have no clue what this is, can you please let me know if you have seen it before or not?? I am completely lost. Help me Obi Wan Kenobi... you're my only hope.Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder -
HELP!! Can anyone tell me what causes this problem? UPDATED!!
I will paste a link below to a screen grab I took of my desktop. I've never seen this before. Could you please tell me what this could be? The best way I could describe it is to describe it as warping effect on various windows.
This has occurred when using photoshop, after effect, illustrator, the OS. Basically I've seen it occur on just about every type of browse window viewable on the Mac.
I reformatted the mac and it still occurs.
I am using a MacPro 2 x 3 GHz Quad Core with 16 GB of RAM, and an NVIDIA Quadro FX 4500. I have an internal 750 GB HD for the OS and 4x750 GB internal RAID for storage. (I do a lot of video work.)
Here's the link:
http://i87.photobucket.com/albums/k142/semilion/Picture-2.jpg
Thanks,
Daniel
PS> Even if you have no clue what this is, can you please let me know if you have seen it before or not?? I am completely lost. Help me Obi Wan Kenobi... you're my only hope.Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder -
Can anyone tell me what is this and how to convert it?
PK s Ë<^Æ2 ' ' mimetypeapplication/vnd.oasis.opendocument.textPK s Ë< Configurations2/statusbar/PK p Ë< ' Configurations2/accelerator/current.xml PK s Ë< Configurations2/floater/PK s Ë< Configurations2/popupmenu/PK s Ë< Configurations2/progressbar/PK s Ë< Configurations2/menubar/PK s Ë< Configurations2/toolbar/PK s Ë< Configurations2/images/Bitmaps/PK s Ë< layout-cachecd`d(ðe`` àd``á„1 ` C ÆP†14aŒ # È PK # /V& Q PK s Ë< content.xmlÝ][sÛȱ~?¿b¬T'Š²ì½*Y¹d›¶¸‘,•¤]gŸRCbH" Šæ>凜óçòKNÝ= € ‰Šå*ïIUÖ 0מ¾|} è/¯>M3sçJŸ ùO{‡Ýç{ÆåÃ"IóñO{¿Ü¼ÛÿaïÕñý¥ Ò¡;JŠá|êòjXä ýk¨wîäíO{ó2?*¬OýQn§Î UãbæòÐë¨Ùúˆç’'¾Zf;wçÆÍÞ•ûTíÚ m[}í`÷™¹q³wRÚÅ®Ñ–ˆÚì>*víüÉgû£‚¨>Ù*]Yŧ,ÍoÚ›TÕìèà`±Xt /»E9>8üñÇ øm\ð0¶›ÍËŒ[%à —9Læ »‡ ¡íÔUv×õ¡msIù|:påΤ±•];U7Þ™#îÆ[H3œØrgÞàÆíã}™ì~¼/“fß©&[Î䇃szÉÿ9?«y¡œî: Ú¶H5,ÓÙÎÛ”ÖÍþEQÄ¥¢ƒ (/÷Åóçß ÈïÖ‹{›/Ê´re£ùðÞæC› #Å‹é&¢Q»Ã j±ïîÀ¦‘ñA ¿¥Ã‹ y ûdëÐ;?» NÜÔ֍Ӈ 粒¯l^S¦Ä!lÝé· ¥› e 3Ú]aÒi½ˆk›TÓl»¸ãmh:.“dcSZÎË } ¼ý»Ô-þ Ù0uYàù¸ ]œû4seŠu٠Ǻ?õD :êbvÔè-œ¥= –…6Àë9ªJ›{œ É+^éòhÓ¾ËÄØÇÔ¼N …Ô ¦Ïªƒ" ½(“Q—~Ù; FI Ú Ä #2Nû#;tû‰ fþø/¢\âc#¿cW?íÝØI1µ‡{†´Hh2M³ex³wð@¢ˆ7 ÜÂ\Që|Ã8ÿmg…ÿóJ;y¸gZC£ýþØåDf’™RÇ«[ÌÒjHZåΖ)LÑCK;¡fÙ† …çÛ§ö‹ÔûÏ™ú:^Ï7 #¾¸gò¥¯ÜôsfדÛz¤Ÿ?ûÁ6VÓçv^ àïá> yÿÛZëåaœK 9³¥ —v6 /è 0 ÿ²¯ô%Å“Ø2Ù ÇNû3’GWV)qÛ¨`À³o³tL‚6t9+féñ¹¯ÒÑrß *¡q EI‚?²™— 6Ö{Ïâ_|•‹—6Ü»= —O§E¼øfFª8<[¸t
¬ ‡Iº˜áž u9„¤‹d‰Ãf<á-Ã1X– p°²aR +µ1hN¨mN o³¥'–@É(,·¡C Ùšº@¸S»Lœë ‚ ¡AÒ’°)K? ë¢P©dòThank you for your answer.
I moved my notepads to a USB and when I opened the notepad I got this strange
characters. Since you said it is a zip file I downloaded and unzip software but it
can't open it . This is a note pad. I don't know what I did wrong when
I passed it to the USB that when I transfered it to the pc it came out like that.
Anything I can do to get my text back? -
Can somebody tell me what is this icon called and how can I get it?
Here is the picture of this symbol.
Please advise if any of you have any clue about it.
Thanks
AdarshHello,
If 07,08 and 09 are the icon ID in SAP this correspond to @07@, @08@ and @09@.
Go to SE11, select database table and fill ICON as table name.
Select content and fill ID with values @07@, @08@ or @09@ and execute. You will get the corresponding Icons:
Regards,
NM. -
Can Anyone Tell Us What CPU This Blade Log Has? (SPARC T3-1B) - PLEASE
Primary Bootstrap.
U-Boot 1.1.4
Custom AST2100 U-Boot 3.0 (Feb 4 2011 - 00:21:51) r62572
DRAM: 119 MB
Flash bank 0 at 10000000 has 32MB in 256 sectors (chipSize 1<<25, ratio 1, bufSz 64).
Flash: 32 MB
VUART1 at port 0x03f8, SerIRQ[4] disabled
VUART2 at port 0x02f8, SerIRQ[3] disabled
Protecting U-Boot flash sectors; monitor_base=100a0000.
board_findGpioNum(): ERROR, 'BIOS_TOP_BLOCK_LOCK' does not match any pin.
board_findGpioNum(): ERROR, 'SP_PECI_ENABLE' does not match any pin.
H/W: Virgoplus Service Processor; SOC: AST2100 Rev. 02 ('A3')
PWC_SP_Broken_OD = 0; ARM restart caused by: power-on
The host is OFF(held) (hostWantsPwr=1, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
Reset straps=0x8c819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0# normal speed
PCI w/VGA noVBIOS; NOR 38ns/byte; DRAM clock is M-PLL: 264 MHz (DDR2-528)
DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1, 61440 us refr, DQSipv=0x2020202
Board Revision - 8d
Date: 2013-11-05 (Tuesday) Time: 16:15:08
Reading FRUID...Valid CRC.
ethaddr=00:21:28:BB:FD:76
eth1addr=00:21:28:BB:FD:77
Platform (virgo): Configuring HPC FPGA (data=0x100ed800, len=45844)
## Extracting HPC microcode...done
Now programming 225844 bytes...
HPC programming done, rc = 0
HPC_FPGA_DONE = 1
Net: faradaynic#0, faradaynic#1
Enter Diagnostics Mode ['q'uick/'n'ormal(default)/e'x'tended(manufacturing mode)] ..... 0
Diagnostics Mode - NORMAL
<DIAGS> Memory Data Bus Test ... PASSED
<DIAGS> Memory Address Bus Test ... PASSED
I2C Probe Test - Motherboard
Bus Device Address Result
=== ============================ ======= ======
1 PCA9548 MUX (U3004) 0xE2 PASSED
2 Sys FRUID (U3003) 0xA0 PASSED
2 Power CPLD (U3301) 0x4E PASSED
2 CPU0 Fault LED's (U3001) 0x40 PASSED
2 CPU1 Fault LED's (U3002) 0x42 PASSED
2 PCA9555 (Misc) (U3005) 0x44 PASSED
2 Temp. Sensor(LM75) (U3006) 0x90 PASSED
2 LTC4215 (U5102) 0x96 PASSED
2 DIMM IMAX (U3102) 0x12 PASSED
6 Bank Panel Led's (U3406) 0xC6 PASSED
6 DS1338(RTC) ( U803) 0xD0 PASSED
<DIAGS>Testing 4eyes access .... PASSED
<DIAGS> PHY #0 R/W Test ... PASSED
<DIAGS> PHY #0 Link Status ... PASSED
<DIAGS> ETHERNET PHY #0, Internal Loopback Test ... PASSED <DIAGS> USB 1.1 Test ... PASSED
<DIAGS>Access to BIOS Flash ... PASSED
<DIAGS> Testing PowerCPLD version ... PASSED
checking for abnormal reboots: 0:0.
abnormal reboot found -- too long, ignore
Booting linux in 3 seconds...
Un-Protect Flash Bank # 1
flctrl: Recovery U-Boot (r56177) at 0x10040000 is valid (min. r51654).
Trying primary image...
Trying to boot package at 10100000
Found kernel image at 10102000
Found root image at 1025f9f4
copying 0x00a8d040 bytes from 0x1025f9f4 to 0x00800000
bootargs= root=/dev/ram ramdisk_size=10804 console=ttyS0,9600 bigphysarea=6144 ractrends.mtdblocks=env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,
## Booting image at 10102000 ...
Image Name: Linux-2.6.27.43
Created: 2011-02-04 5:18:45 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1431988 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
do_bootm_linux() armlinux.c:104
bootm
0x10102000
0x00800000
theKernel=00008000
do_bootm_linux() armlinux.c:121 - 9
## Loading Ramdisk Image at 00800000 ...
do_bootm_linux() armlinux.c:155 - 10
Image Name:
Created: 2011-02-04 6:07:05 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 11063296 Bytes = 10.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
do_bootm_linux() armlinux.c:182 - 11
do_bootm_linux() armlinux.c:245 - 15
arch_number = 0x00000386
env_t = 0x01ED0008
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x00000000
-> size = 0x07700000
ethaddr = 00:21:28:BB:FD:76
eth1addr = 00:21:28:BB:FD:77
ip_addr = 0.0.0.0
baudrate = 9600 bps
Sun extensions:
bi_UBootEnvAddr = 0x10020000
bi_UBootEnvSize = 0x00020000
bi_flashstart = 0x10000000
bi_flashsize = 0x02000000
bi_flashbanksize = 0x02000000
bi_flashbanks = 0x01
bi_flashbankwidth = 0x01
bi_flashsectorsize = 0x00020000
bi_flashsectorcount = 0x00000100
bi_boottype = 0x02
bi_primarytype = 0x02
bi_secondarytype = 0x00
bi_booted = 0x10100000
bi_primary = 0x100a0000
bi_secondary = 0xffffffff
bi_primaryhdr = 0x10100000
bi_secondaryhdr = 0xffffffff
bi_imagearea0 = 0x100a0000
bi_imagearea1 = 0xffffffff
bi_maximagesize = 0x01f60000
bi_min_firmware_rev = 0
bi_sptrace_base = 0x00000000
bi_sptrace_len = 0x00000000
bi_apbclockhz = 0x03ef1480
H/W: Virgoplus Service Processor; SOC: AST2100 Rev. 02 ('A3')
The host is OFF(held) (hostWantsPwr=1, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
ARM Control reg: RR=0 HV=0 IC=1 BPd=0 RomP=0 SysP=0 BE=0 WB=1 DC=0 AlinFlt=1 MMU=0
Cache Type reg: CType=0xe WB, sep.; I: 16KB of 32B lines 4-way; D: 16KB of 32B lines 4-way
IC locked ways(3:0): 0000b, DC locked ways: 0000b
Reset straps=0x8c819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0# normal speed
H-PLL (params=0x04291) 264.000 MHz, M-PLL params=0x04120-->264.000 MHz
CPUCLK: H-PLL/1=264 MHz, AHB HCLK: CPUCLK/2=132 MHz, APB PCLK: H-PLL/4= 66 MHz
PCI w/VGA noVBIOS; NOR 38ns/byte; DRAM clock is M-PLL: 264 MHz (DDR2-528)
Bus-master-mode clocks: PCI BHCLK= 33 MHz, LPC LHCLK= 33 MHz
Stopped clocks: vidCap-1, SP-Display, HACE, PCI-host
DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1, 61440 us refr, DQSipv=0x2020202
Reset controls: HACE, PwmFt, displays, MDMA, PCI-host
Register protect: SCU prot, DMC prot, AHBC prot, VIC U-prot
Ethernet MAC-PHY interface mode=6 (RMII + RMII), no MII2DC+DIO pins
do_bootm_linux() armlinux.c:260
do_bootm_linux() armlinux.c:263
do_bootm_linux() armlinux.c:267
do_bootm_linux() armlinux.c:279
do_bootm_linux() armlinux.c:283
do_bootm_linux() armlinux.c:287
do_bootm_linux() armlinux.c:295
Galactic register 1: 400509c0
Starting watchdog timer.
Starting kernel at 0x00008000...
do_bootm_linux() armlinux.c:320
do_bootm_linux() armlinux.c:324 (0x00000386,0x40000100)
Uncompressing Linux............................................................................................... done, booting the kernel.
Linux version 2.6.27.43 (buildbot@build-slave-sh-8) (gcc version 3.3.6) #1 Fri Feb 4 00:18:12 EST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: ASPEED-AST2100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30226
Kernel command line: root=/dev/ram ramdisk_size=10804 console=ttyS0,9600 bigphysarea=6144 ractrends.mtdblocks=env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,
PID hash table entries: 512 (order: 9, 2048 bytes)
console [ttyS0] enabled
mach/timer.c: Just lost 80 clock interrupts.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 119MB = 119MB total
Memory: 82144KB available (2708K code, 246K data, 124K init)
Calibrating delay loop... 131.48 BogoMIPS (lpj=657408)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Testing write buffer coherency: ok
net_namespace: 804 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 10804K
NetWinder Floating Point Emulator V0.97 (double precision)
bigphysarea: Allocated 6144 pages at 0xc128e000.
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 181
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
ttyS0 at MMIO 0x1e783000 (irq = 9) is a GUC-ASPEED UART
ttyS1 at MMIO 0x1e784000 (irq = 10) is a GUC-ASPEED UART
brd: module loaded
loop: module loaded
FTGMAC100: ASPEED FTGMAC Driver, (Linux Kernel 2.6.15.7) 11/17/2008 - by ASPEED
FTGMAC100: eth0: at 0xfe660000 IRQ:2 noWait:0, MAC 00:21:28:bb:fd:76
FTGMAC100: eth0:ftgmac100_reset, phyAddr=0x0, miiPhyId=0x0040_61e4
FTGMAC100: lp->rx_descs = ffc00000, lp->rx_rx_descs_dma = 67ac000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc01000, lp->tx_rx_descs_dma = 67bd000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
FTGMAC100: eth1: at 0xfe680000 IRQ:3 noWait:0, MAC 00:21:28:bb:fd:77
FTGMAC100: eth1:ftgmac100_reset, phyAddr=0xff, miiPhyId=0x0000_0002
FTGMAC100: lp->rx_descs = ffc02000, lp->rx_rx_descs_dma = 67c1000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc03000, lp->tx_rx_descs_dma = 67d4000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
Ractrends Flash mapping: 0x2000000 at 0x10000000
Bank #0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Bank #0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
Number of banks found = 1
GetMTDPartitions() says string is "env,0x20000,0x20000,coredump,0x1500000,0x800000,persist,0x1d00000,0x200000,params,0x1f00000,0x100000,"
MTD Partition 0 : fullpart @ 0x0 of Size 0x2000000
MTD Partition 1 : env @ 0x20000 of Size 0x20000
MTD Partition 2 : coredump @ 0x1500000 of Size 0x800000
MTD Partition 3 : persist @ 0x1d00000 of Size 0x200000
MTD Partition 4 : params @ 0x1f00000 of Size 0x100000
Creating 5 MTD partitions on "Bank #0":
0x00000000-0x02000000 : "fullpart"
0x00020000-0x00040000 : "env"
0x01500000-0x01d00000 : "coredump"
0x01d00000-0x01f00000 : "persist"
0x01f00000-0x02000000 : "params"
wdt: AST2100 WDT is installed.
wdt: AST2100 WDT nowayout = 1, heartbeat = 30 secs
wdt: AST2100 WDT guardstartupshutdown = 1
wdt: AST2100 WDT startuptimeout = 600, shutdowntimeout = 60
wdt: AST2100 WDT was enabled at driver start, time remaining 53 secs.
wdt: Guarding startup, setting watchdog for 600 seconds.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 10801KiB [1 disk] into ram disk... done.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 124K
INIT: version 2.86 booting
Creating /var tmpfs
Creating directories in /var...done.
Creating /var/log tmpfs...done.
Calculating module dependencies... done.
Loading modules...
flashinfo
helper
Helper Module Driver Version 1.1
mach/timer.c: Just lost 2 clock interrupts.
Copyright (c) 2006 American Megatrends Inc.
dbgpersist
Persistent Driver Debugger version 1.1
Copyright (c) 2008 Sun Microsystems Inc.
Loading debug: usbhub [success]
1 debug modules loaded
gpiomgr
gpioint
peci
PECI Driver: peci_initialize_device(696) Setup device peci0.
i2c-core
i2c_boardinfo: module license 'unspecified' taints kernel.
i2c-dev
i2c /dev entries driver
i2c-algo-as
i2c-aspeed
i2c-adapter i2c-0: Hardware routines registered
Registered bus id: i2c-0
i2c-adapter i2c-1: Hardware routines registered
Registered bus id: i2c-1
i2c-adapter i2c-2: Hardware routines registered
Registered bus id: i2c-2
i2c-adapter i2c-3: Hardware routines registered
Registered bus id: i2c-3
i2c-adapter i2c-4: Hardware routines registered
Registered bus id: i2c-4
i2c-adapter i2c-5: Hardware routines registered
Registered bus id: i2c-5
i2c-adapter i2c-6: Hardware routines registered
Registered bus id: i2c-6
i2c-boardinfo
videocap
AST Video Capture Driver Version 1.0
Copyright (c) 2005-2006 American Megatrends Inc.
usb
Initializing USB Devices -
USB Device Endpoint Driver
Copyright 2006 American Megatrends Inc.
usb_init(): --USB INITIALIZING-- version MOD-VER:2011-02-04,00:09:46 with UsbEth and EndPoint-Remapping: 1
USB GlobalDisconnect(): Called
(E)ethBot_ConvertMacStr: converting '002128574716'
Init AST11 Success
USB GlobalReconnect(): Called
mach/timer.c: Just lost 2 clock interrupts.
USB Driver is Successfully Initialized
btkcs
All modules loaded.
... done.
Checking device file systems
Finished check of device file systems
Checking configuration files state ...
Image date: Fri Feb 4 01:06:21 EST 2011 Image revision: 62572
Conf date: Fri Feb 4 01:06:21 EST 2011 Conf revision: 62572
Configuration files state good after upgrade.
Starting Platform Initialization: platinit.
Running ldconfig...done
Starting Platform Initialization: c10init.
Starting FRU update program, platform id phase: frutool.
Starting spdiag Platform Init: /usr/local/bin/spdiag Done (0)
Setting up networking...done.
Hostname: SUNSP-1113FMN04D.
Setting up IP spoofing protection: rp_filter.
Configuring IPv6...done
Configuring network interfaces...FTGMAC100: eth0:ftgmac100_open
mach/timer.c: Just lost 3 clock interrupts.
FTGMAC100: eth0:ftgmac100_reset, phyAddr=0x0, miiPhyId=0x0040_61e4
FTGMAC100: eth1:ftgmac100_open
FTGMAC100: eth1:ftgmac100_reset, phyAddr=0xff, miiPhyId=0x0000_0002
SIOCSIFNETMASK: Cannot assign requested address
SIOCSIFBRDADDR: Cannot assign requested address
Failed to bring up eth1.
done.
Starting Constellation Blade Daemon: c10bd.
Running ldconfig...done
Starting portmap daemon: portmap.
Starting ILOM Watchdog daemon.
wdt: WDT device opened. Watchdog starting with heartbeat = 30 secs
mach/timer.c: Just lost 6 clock interrupts.
wdt: AST2100 WDT was enabled at driver open, time remaining 556 secs.
Done
populating memstore vars from disk
Running plat...plat: platform=b10, chassis=c01
Done running plat
Identifying Product Data...done.
Starting FRU info cache program: frucache.
INIT: Entering runlevel: 3
Preparsing sensor.xml...
Starting Shared Sensor Broadcast Daemon: ssbcastd Done
Starting system log daemon: syslogd and klogd.
Starting capidirect daemon: capidirectd . Done
Starting Event Manager: eventmgr . Done
Starting ipmi log manager daemon: logmgr . Done
Starting System Avoidance Daemon: sad Done
Starting user mgmt upgrade program: usrmgt_upgrade.
Starting the Health Monitor Daemon...
Starting portmap daemon: portmap.
Starting Host console Daemon: consd . Done
Starting capidirectd: Done.
Starting Error Telemetry Collection Daemon: etcd . Done
Starting Fault Diagnosis Daemon: fdd . Done
Starting IPMI Stack: . Done
SSH RSA Host Key Files already exist. Skipping key creation ...
SSH DSA Host Key Files already exist. Skipping key creation ...
Starting sshd.
Starting OpenBSD Secure Shell server: sshd-man.
Starting SP fishwrap cache daemon: fishwrapd . Done
Starting Network Controller Sideband Interface Daemon: ncsid . Done
Starting Platform Obfuscation Daemon: pod . Done
Starting lu main daemon: lumain . Done
Starting HT sign on daemon: htsignond . Done
Starting webgo Web Server: webgo . Done
Starting Detection/Diagnosis After System Boot: dasboot Done
Starting Shared Sensor Poller: sspoller Done
Starting Servicetags discoverer: stdiscoverer.
Starting Servicetags listener: stlistener.
Starting Dynamic FRUID Daemon: dynafrud Done
Starting FRU info cache program: frucache.
SUNSP-1113FMN04D login:For which reason do you want to known the SP processor model ?
-
Can anyone tell me what is this all about???
int timeout = 500; // half a second
SocketAddress socketAddress =
new InetSocketAddress(host, port);
Socket socket = new Socket();
socket.connect(socketAddress, timeout);It's a piece of code from a "client" program that tries to
open a socket connection to a given "host" on a given "port".
A timeout prevents the client from being stuck during the connection. -
Can anyone tell me what the Wizard is doing when I run the Index Wizard?
I am running RH8, Windows 7 and generating WebHelp.
The Wizard seems to be picking up the names of topics and making them keywords. Some of my topic names have no spaces in them and that’s the way they come into the Index. So, I assume I have to name all of my topics so that they come into the index correctly. Is that right?
I also seem to be getting HTML terms in my index. Some of it looks like formatting. What is happening there?
When the index is created by the wizard and I look at the Index pod I see the index keywords on the top of the pod. Some of the topics are in bold and some are not. The ones in bold do not have an entry in the bottom of the pod in the Topics for: area. These do not display when the help is generated. The unbolded items have an entry in the bottom of the pod in the Topics for: area. These items display when the project is generated. So, what’s happening here? Why are some topics bold and others not?
If you can point me to some Index info I’d be grateful. Yes, I wish I could take a class but that’s not likely to happen in this economy.
But this forum has the best people. I’d be dead without it.
Thanks.
PatWell, we can't as we don't know what you consider as "more than enough". The built is quite heavy (like it can be 800mb) then it needs to be extracted to be installed before everything unneeded gets deleted...
-
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??
Hello,
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1 -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
Any information would be greatly appreciated.If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show. -
After I updated to iOS 7.0.2, my iTunes keeps telling me to restore my iPhone, after I restored it. Can someone tell me what I can do to fix this?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I received this update from Apple, but I have no record of altering anything, in particular telephone numbers, can anyone tell me what has been updated, who updated it, and how was entry made to my account?
Hello,
The following information for your Apple ID was updated on 03/22/2014:
Phone number(s)
If these changes were made in error, please CLICK HERE, to Cancel this changes withing 24hours..
This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
Thanks,
Apple Customer SupportThis is a user to user forum, so no one here can provide an answer. You should contact iTunes Support directly.
Here's how you can do that: http://www.apple.com/support/itunes/contact/ -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
Maybe you are looking for
-
Hi guys, I downloaded the flex builder from adobe, I install the application but when I'am trying to lauch my application I get the error Windows - No Disk ... exception processing message 0xc0000013 I reinstall adobe flash and my java runtime, I sti
-
How people do 'setAttribute' in the decode of JSF custom comp render class
Imagine the next scenario: I have a custom JSF table with one attribute called data (of type String[][]) with serves in the encode() method of the table to produce the html table markup. encodeBegin(...) { String[][] data = (String[][])table.getA
-
Default Storage Category for easyDMS
Hello Everyone, I currently assigned default storage category (using KPRO) for my user on, easyDMS -> Organize -> Preferences -> System (Tab) How can I make this storage category defaulted for all the users using easyDMS? Regards, Mohan
-
No TrackPoint Scroll and Brightness Control After Resume
Hello All, I'm having an issue with my new x120e where after a couple suspend/resume cycles both the Trackpoint scroll function and the ability to adjust screen brightness no longer work. Using the Trackpoint only yields results as a pointing device,
-
Upgrade OS Panther on iBook G4 to unavailable OS Tiger
I am repurposing and old iBook G4 to be the music server/centre in my house (1.2 GHz, 14-in, early 2004). Upgrading the iBook seemed to be a less expensive option than say, buying a MacMini which has no screen or keyboard/mouse. The iBook is in prett