Can anybody confirm this rather serious bug?

Steps:
- Use Arch 2008.06 Install Disc
--- (I used 32-bit)
- Install Arch, but use HTTP/FTP for source
- No matter what you format / as (I tried ReiserFS and XFS), upon reboot you'll get a fsck error and it goes into maint. mode
Updates:
- I tried to use CDROM as source, same result.
Last edited by georgia_tech_swagger (2008-11-22 19:51:14)

:: Checking Filesystems [BUSY]
/sbin/fsck.xfs: XFS file system
/dev/sdc1: clean, 30/28112 files, 13409/112420 blocks
/dev/sdb1: Reiserfs super block in block 16 on /dev/sdb1 of format 3.6 with standard journal
/dev/sda2: Reiserfs super block in block 16 on /dev/sda2 of format 3.6 with standard journal
Blocks (total/free): 25601568/9553276 by 4096 bytes
Filesystem is clean
Blocks (total/free): 60924496/9768850 by 4096 bytes
Filesystem is clean
(lag)
[FAIL]
FILESYSTEM CHECK FAILED
Please repair manually and reboot. Note that the root file system is currently mounted read-only. To remount it read-write type: mount -n -o remount,rw /
When you exit the maintenance shell the system reboot automatically.
Give root password for maintenance
(or type Control-D to continue):

Similar Messages

Can someone confirm this is a bug in CS3?

This may well be simply a problem on my local computer,
but...
I have placed the Actions window on my second monitor (dual
monitor system, Win XP), to that (docked in the same window) I have
added the Output, Compile Errors and Help windows so that they can
all be moved and viewed as one. However, in this configuration I
cannot exit Flash.
I have tried every combination of these windows in pairs and
triplets, but when I add the fourth window to the set, I cannot
close Flash.
If someone can confirm this, I'll submit a bug report.

Rex, instead of filing a bug could you open a support
webcase? (or do both?) Be certain to provide your video card and
driver info.. Reply back with the case number and I'll make sure it
gets to the right people.

Can anyone confirm this Slow Motion Bug

Hi All,
in a PAL project if I apply slow motion to a clip then that clip becomes distorted - looks like every other line from the clip has gone.
I am using an iMac core duo, and have all latest OS and iLife patches applied.
I cannot find a work around to this.

Sounds about right. Discussion and fixes can be found here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6016.shtml
Patrick

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian

Thanks for a stealth fix - can anyone confirm this actually happened?

When the Yoga 2 Pro was released I received an error message about an unauthorized power supply when using with my energizer xpal external battery. It was only a nuisance since the battery continued to work. After this last power update I have not seen that message at all and my laptop continues to work well while on the external battery. Can anyone confirm this was an undocumented fix?

I know they fixed an error message when using other power supplies in the bios when they released the latest (11/7 I think) bios update.

Can anybody clarify this problem?

IN Fs00, if we click dropdown button beside Gl account we will get 1 screen , there if u click ok button , then we can see the all GL master. But, when i was practising, it is not showing. with that gl a/c's i had posted entries, and saw ledger also.
Can anybody clarify this problem?

Hi Srinivas
This is system problem, ask to you basis guy
and system admin.
Other wise check in different system.
Thanks
Ranjith

Can anybody explain this S_OUT-MAKTX+0(20)?

can anybody explain this S_OUT-MAKTX+0(20)? what 0(20) implies?

Here .. u r going to use onli the first 20 characters from the beginning of the string S_OUT-MAKTX..
seee...
suppose w_char is a variable of type C of 30 characters length and having the content as 'SAP-ABAP FORUMS'.
i.e w_char = 'SAP-ABAP FORUMS'.
now
w_char+0(4) = 'SAP-'.
W_CHAR+1(4) = 'AP-A'.
W_CHAR+3(5) = '-ABAP'.
i.e Starting from the Third character and upto 5 characters... AND here the counting of the characters starts from 0.
Hope u understood...
regards,
sai ramesh

My ipad just won't let me enter my apple password on FaceTime or iMessage, it works fine on my iPhone, I have tried numerous things but nothing works, can anybody help please, will a bug fix sort this out when they finally make one

My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Can anyone confirm this getPathInfo()= null problem???

Hey everyone,
 I am still awaiting word from WEBSupport, but I am curious if anyone else
 can confirm this behaviour... I have created a very simple little
 TestServlet class...once it is compiled you simply need to place it in your
 servlet classpath for weblogic.
 You will need to add the following line to your weblogic.properties file:
 weblogic.httpd.register.TestServlet.jsv=TestServlet
 to run it type: http://<server_address>:7001/TestServlet.jsv
 When I run this on my 4.5.1 (SP11) Server I get the expected null problem on
 getPathInfo().
 If anyone can help me out, I am very appreciative :)
 Cheers,
 Sean Hignett
 [TestServlet.java]


Is this STILL an issue? I have recently upgraded to service pack 13 of 4.5.1
 and I am still seeing null returned by this call. Will this ever be resolved
 in
 a future 4.5.1 service pack?
 Craig McElroy
 [email protected]
 Cameron Purdy wrote:
 > I believe that was a regression. I do not know if it has been fixed. I did
 > encounter it in 5.1. The spec says that null is never returned, so it is an
 > obvious bug.
 >
 > --
 >
 > Cameron Purdy
 > http://www.tangosol.com
 >
 > "Sean Hignett" <[email protected]> wrote in message
 > news:[email protected]...
 > > Hey everyone,
 > >
 > > I am still awaiting word from WEBSupport, but I am curious if anyone else
 > > can confirm this behaviour... I have created a very simple little
 > > TestServlet class...once it is compiled you simply need to place it in
 > your
 > > servlet classpath for weblogic.
 > >
 > > You will need to add the following line to your weblogic.properties file:
 > > weblogic.httpd.register.TestServlet.jsv=TestServlet
 > >
 > > to run it type: http://<server_address>:7001/TestServlet.jsv
 > >
 > > When I run this on my 4.5.1 (SP11) Server I get the expected null problem
 > on
 > > getPathInfo().
 > >
 > > If anyone can help me out, I am very appreciative :)
 > >
 > > Cheers,
 > >
 > > Sean Hignett
 > >
 > >
 > >
 > >
 > >
 > >
 > >
 > >

Can someone confirm this please?

I was told all over these forums that I'd be given a replacement refurbished iPhone 4S because my one right now has terrible battery life. So I called Apple and they assured me that they only replaced them with new ones in Ireland. Could somebody confirm this?

tonefox wrote:
The main difference between a new phone and a refurbished phone is that the refurbished phone has been checked more carefully to ensure it is in perfect condition.
I know all the differences, I was just confirming that replacements in Ireland are new iPhones. And my iPhone is the rarest one - 64GB Black iPhone 4S so that could mean they don't have many refurbs.

HT201318 If you increase your iCloud storage capacity can you increase the number of songs that exceed the 25,000 limit on the iMatch. If it does not apply specifically how can I increase this rather constrained limit?

The whole business of cloud storage is unclear to me. They say that you have 5G of memory free upgrade to 15 for twenty-five dollars and that this is unrelated to music and video memory. I get this, but I have purchased iCloud Match for $25 but I've quickly maxed out the 25,000 song limit. How can I increase this limit. It is at this point I am unclear about the $25 for 15G additional storage... can this be used to increase iTunes/iCloudmusic storage to increase the music Storage? One would think that apple would make these distinctions clearer. Can anyone carify? Thanks!

iTunes Match does not use your iCloud account. Your annual Match subscribtion pays for separate storage to host your iTunes library. As far as I know, you can't increase the 25,000 song limit.
If you recently purchased the storage upgrade for this purpose, in the U.S. you could call 1-800-MYAPPLE for a refund if you don't need it.

Can you confirm this Faces bug in iPhoto '11?

I have created an Smart Album "unnamed faces" which should show all photos with "unnamed" faces. It shows about 2,500 of my about 24,000 photos. Some of these have been added recently, some are in the library since the old iPhoto '08 days. I see that some of them often "forget" that I have already rotated them. Even the face frames stay unrotated and are sometimes converted from squares to rectangles. But all this doesn't really matter.
This is what I see as a bug: When I edit such a photo in the Smart Album, it e.g. shows one named face and "1 unnamed". I then rotate the image to have it in the desired portrait or landscape view, remove the wrong, rectangled and named face frame and name the unnamed, correctly placed square face frame with the desired person's name.
Whatever I do next, photos treated this way still tell me they would have 1 named and 1 unnamed face frame. I only see the named, square frame, because I have deleted the old, wrong and rectangled frame before.
Even more strange: When I set the Smart Album parameters like this:
it shows these "damaged" images, which optically only have one named face frame left. The (translated) settings are: "All" conditions: "Face is unnamed" && "Face is not unnamed".
This is really weird and I have no idea how to fix it except deleting and re-importing the images.
PS: Yes, I have already even tried all options of iPhoto Library Manager without success for this issue.

Back to your original Library:
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Can Anybody help this "display :0" problem I have? [SOLVED]

Hello, I am very new to Arch (and only on Linux for a year).
I have 2 problems:
Problem #1). When messing around after my install, I'm not sure what I did... but now I have an error every time I boot up and log in. The error is this:
There already appears to be an X server running on display :0.
Should another display number by tried? Answering no will cause
GDM to attempt starting the server on :0 again. (You can change
consoles by pressing Ctrl-Alt-f7 to go to console 7. X servers
usually run on 7 or higher)
Now, I am able to click tty7 and run a regular desktop, and I am able to use tty1, tty2....for root...but I just would like to not have that error.
Problem #2). Well...after prob. #1... I got frustrated and tried to stop the problem by upgrading to the new testing xorg-server and xf86-video-intel... as well as a full pacman -Syu. (I know I shouldn't be using the Testing repo, but since I thought I was going to be doing another clean install, I figured I would give it a try and also see what the new Gnome looks before I scrapped this install)
...well, after doing a new "Xorg -configure", I was able to edit my /etc/X11/xorg.conf so that I got my screen working and my mouse able to move and tap, but I have lost the ability to scroll...and it had been working before Problem #1, and the new upgrades... so, instead of scrapping this install, I would really like to try and fix these 2 problems, because other than that, everything is working nicely.
This is my /etc/X11/corg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
Option "Touchpad" "AlwaysCore"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ImPS/2"
# Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f0d"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "record"
# Load "GLcore"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "dbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "X.org Configured"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "49"
Option "RightEdge" "900"
Option "TopEdge" "73"
Option "BottomEdge" "666"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "200"
Option "VertScrollDelta" "24"
Option "MinSpeed" "0.40"
Option "MaxSpeed" "0.80"
Option "AccelFactor" "0.024"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "CoastingSpeed" "5.00"
Option "FastTaps" "on"
Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SendCoreEvents"
Option "SHMConfig" "on"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Any help would be cool, thanks,
-j.c.
Last edited by methuselah (2007-10-24 04:12:02)

Misfit138 wrote:I've been using GNU/Linux for a couple years, but only for one full year seriously. I am still learning and have oh so very much to learn. I understand how one could get frustrated, give up and reinstall. I did it quite a bit before I adopted the mindset to slow down and start absorbing some knowledge about how things work. I still have issues, and sometimes keeping the thing running is a challenge of itself for me. Anyway, when you are ready to come back and try again, the community will still be here to help. :)
Thank you for understanding... and guess what, I gave Archlinux a third attempt yesterday...and I have a fully working Arch Linux!!
After giving up after my second Arch attempt, I installed xubuntu 7.10 tribe5 and upgraded to the beta.
7.10 felt that it had gotten slower than 7.04 (probably because it's still being worked on)... or maybe I had seen how fast Arch was.
I liked the new look of xubuntu 7.10, and it was very easy to install and add all of my special hacks to make it faster (most of them from this sidux page: http://sidux.com/PNphpBB2-viewtopic-t-3484-start-0.html ).
But even with my OpenDNS and everything else that I do from that page, as well as all of my Swiftfox about:config tweaks, I still felt that it was slower than Arch had been.
So then I started trying to install Compiz Fusion like the way I had it in feisty 7.04: http://forum.compiz-fusion.org/showthread.php?t=4159
... but for some reason, the Compiz Fusion in the gutsy repos didn't work with xubuntu 7.10, and I couldn't find a gutsy repo like Trevino's repo for feisty...and yes, I guess I could of built it from source, but I just decide to give the Xfce4 Compositer a test run... and I found my xubuntu 7.10 crawling slower than it had been with Compiz Fusion on 7.04.
Then I decide to give Arch one more chance since there wasn't going to be a Trevino repo for little (and I didn't feel like building Compiz and all of the plugins from source)....plus, I figured now that I had learned how to properly install Arch, that if I gave it a moment after install, I would learn how to configure everything to work correctly.
And now for the success story.....
The first thing I did was to download and burn the newest 2007.08-2, then I did the regular base install, and then I took a chance to see if I could get the new Gnome and Xorg working off of a clean install, so I uncommented the testing repos before doing my first pacman -Syu... then I also installed the new xf86-video-intel driver that I had had problems with... and for my first time on Linux (one year now), I didn't install xfce4.
So, after editing my xorg.conf after Xorg --configure, everything (including scrolling) worked, well everything except for my Caps Lock key light, like everybody else on this very helpful page: http://bbs.archlinux.org/viewtopic.php?id=37670&p=1
So this is my working xorg.conf for my Intel 910GML celeron m HP pavilion dv4230us laptop:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
# Option "Touchpad" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "record"
Load "dri"
Load "freetype"
Load "type1"
Load "glx"
Load "int10"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "vbe"
Load "synaptics"
# Load "GLcore"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
# Option "Protocol" "ImPS/2"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f0d"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "49"
Option "RightEdge" "900"
Option "TopEdge" "73"
Option "BottomEdge" "666"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "200"
Option "VertScrollDelta" "24"
Option "MinSpeed" "0.40"
Option "MaxSpeed" "0.80"
Option "AccelFactor" "0.024"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "CoastingSpeed" "5.00"
Option "FastTaps" "on"
Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SendCoreEvents"
Option "SHMConfig" "on"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
So after getting my mouse to work properly, I had done a lot of research about OpenDNS and Arch, but I hadn't found an easy way to do it in any forum or google search... then, I found a way on my own that works perfectly for me.
What I did was I added the package called Wicd: http://wiki.archlinux.org/index.php/Wicd for my BCM43XX wireless, and after using this Wireless guide: http://wiki.archlinux.org/index.php/Wir … k_settings to configure my eht1, I then added a "Wired" profile to my Wicd.
...With my Wired Network Profile in Wicd called "OpenDNS", using the proper OpenDNS nameservers, all I have to do when I first boot up is connect my "OpenDNS" profile, and I am able to use OpenDNS and pass all of it's OpenDNS checks: http://www.opendns.com/welcome/
Now I haven't tried to install Compiz Fusion yet, and I almost don't need it except for the Shift Switcher and Emerald... so I might wait a while.
And to finish my long-winded success story, I would just say that the GDM issue was something I caused on my own, and couldn't correct on my own, and had nothing to do with Archlinux...and the new Xorg/ xf86 intel issue that I had was easily solved once I payed attention to making sure that the "Input Device" was correct for the Touchpad like on this post: http://bbs.archlinux.org/viewtopic.php?id=37670&p=1
As for, OpenDNS... I'm sure there are other way's to do it, but this way worked for me, and I found the solution on my own, so I'm sort of proud of that... and I'll be messing around with Compiz Fusion soon, but I'm not that worried about it.
Anyway, here is my new Archlinux Desktop using my own gtk-2.0 theme and custom icons:
Large View: http://i144.photobucket.com/albums/r161 … ot-1-1.png
Large View: http://i144.photobucket.com/albums/r161 … shot-2.png
Last edited by methuselah (2007-10-09 17:23:49)

Can anybody translate this one-line Visual Basic into AppleScript?

I have been pulling my hair out in trying to get InDesign CS4 to markup selected text with an XML tag. Supposedly this can be done using Visual Basic. Is there anybody out there that could possibly translate this seemingly simply code into AppleScript?
myText.AssociatedXMLElements.Item(1).XMLElements.Add("break", myText)
Here is another example:
With myTSRangeText.AssociatedXMLElements.Item(1).Parent.XMLElements.Add("znak")  Call .Markup(myTSRangeText) End With
I am still thinking that AS cannot do this… but it is worth a shot to ask.
Thanks in advance,
Jeff

If it makes any difference
This is what I have so far using AppleScript. It is very very close. But the result of running the script appends the tagged text to the end of the text in the frame. In other words, it looks like this: (assuming I had the characters "word" highlighted). This is because I can only seem to tell the story to markup using the tag. I cannot tell the selection to markup using the tag?
This word is the item I want to tag.[word]
I am wanting the result to tag the selected item. So it should look like this:
This [word] is the item I want to tag.
tell application "Adobe InDesign CS4"
    tell document 1
        set selText to object reference of (text from character 1 to character -1) of selection
        set selTextString to selText as string
        display dialog selText as string
        set parentStoryID to parent story of selection
        set myXMLTag to (get XML tag "theDate")
        set myXMLStoryTag to (get XML tag "Story")
        tell XML element 1
            set theStoryElement to make XML element with properties {markup tag:"Story"}
            tell theStoryElement
                set myXMLElement to make XML element with properties {markup tag:"theDate", contents:selTextString}
                tell parentStoryID to markup using theStoryElement
            end tell
        end tell
    end tell
end tell

Hi, can someone confirm this is the correct memory?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT &viewitem=&item=180071178504&rd=1&rd=1
I just purchased this on ebay, its a 2 gig ram for the macbook 1.83ghz. I just wanna make sure this is the correct compatible memory. Thanks a bunch. (ebay #180071178504)

From the description on eBay, it looks like the right RAM. PC5300 is what the MacBook takes, and the description on the ad even mentions the MacBook. So it should be fine if the description is accurate.
And yes, it will make the machine work faster -- it will probably have significantly more effect than a faster processor would. If the processor has to retrieve data from the hard disk, the system comes to a screeching halt while it loads. As it works and the memory fills up, it has to offload some of what it's doing to the hard disk, then load new stuff up to work with, and so on. It will seriously slow down your system having inadequate RAM, and that's what 512MB is in a MacBook, if that's what yours has.
If you have plenty of RAM, then the system can put pretty much everything it needs there, which means it won't be waiting around for the hard disk nearly as much. Moving from 512MB to 2GB will give a dramatic speed increase on your MacBook.
Good luck!

Can anybody confirm this rather serious bug?

Similar Messages

Maybe you are looking for