Can anybody help identify this symptom? HELP!

12" 867 G4 PB, worked great until today.
Wouldn't shut down, so we held the power button & forced it off.
Later we went to reboot and received nothing but a grey screen after hearing the normal boot tune. The unit never completely boots.
Inserted TechTools CD and unit boots off of the disk but cannot complete diagnostic tests. Video & mouse work fine in this mode.
Removed extra memory, no change.
Removed hard drive and took to a different Mac. Drive works fine, recovered data to use on another iBook.
One can hear the hard drive click on boot but seems pretty quiet afterwards (obviously, this is in the suspect laptop - works fine on another system). Fan working okay.
Reset PMU and NVRAM. No change.
At this point I'm thinking either a bad motherboard or a bad DC invertor? I've never had a bad invertor so I'm not real sure what that may do to one of these.
So, before I scratch up funds for a motherboard replacement, I thought I'd see if anybody here experienced similar symptoms or could shed some light on this so I can repair as needed.
We miss our PowerBook! Solid as a rock until this unfortunate turn of events. Bummer.
Thanks in advance for any advice or ideas to try on getting it back in action!

Dead system board... Conveniently just barely past the 1 year warranty. Ugh.

Similar Messages

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

Help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

Neither can we. Only the original owner can help you, surely he/she can reset their password.

I'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this

i'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this

Hi Madhuama, I'll try to give you a hand with this. First off, what OS is running on your notebook, what game are you attempting to play, and how is it not working? Is it not installing?
Thanks,
Fenian Frank
I work on behalf of HP

.can anybody explain the bdc with help of an example

i am new to bdc .can anybody explain the bdc with help of an example

Hi,
BDC is method to transfer legacy data into R3 system.
Data transfer can be done in any one method below:
BDC
LSMW
Direct Input method
BAPI
Of these BDC is subdivided into 2 types,
Call Transaction and Session method (TCode: SM35)
Let me give the sample prg for Call Transaction method.
tables ZMATMASTER.
DATA : itab like TABLE OF ZMATMASTER WITH KEY DESCRIPTION with header line.
DATA : IT_BDC LIKE TABLE OF BDCDATA WITH HEADER LINE.
DATA : IT_MSG LIKE TABLE OF BDCMSGCOLL WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Material.txt'
    FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = '#'
TABLES
    DATA_TAB                      = itab.
LOOP AT ITAB.
    PERFORM BDC_HEADER USING 'ZFILE_DOWNLOAD' 9001.
    PERFORM BDC_DATA   USING 'BDC_OKCODE' 'SAVE'.
    PERFORM BDC_DATA   USING 'ZMATMASTER-MNO' ITAB-MNO.
    PERFORM BDC_DATA   USING 'ZMATMASTER-DESCRIPTION' ITAB-DESCRIPTION.
    PERFORM BDC_DATA   USING 'ZMATMASTER-PLANT' ITAB-PLANT.
    PERFORM BDC_DATA   USING 'ZMATMASTER-SLOC' ITAB-SLOC.
    PERFORM BDC_DATA   USING 'ZMATMASTER-ROL' ITAB-ROL.
    PERFORM BDC_DATA   USING 'ZMATMASTER-UOM' ITAB-UOM.
    PERFORM BDC_DATA   USING 'ZMATMASTER-PRICE' ITAB-PRICE.
    PERFORM BDC_DATA   USING 'ZMATMASTER-DDAYS' ITAB-DDAYS.
    PERFORM BDC_DATA   USING 'ZMATMASTER-FLOT' ITAB-FLOT.
ENDLOOP.
CALL TRANSACTION 'ZTRANSCODES'
                 USING IT_BDC
                 MODE 'A'
                 UPDATE 'S'
                 MESSAGES INTO IT_MSG.
FORM BDC_HEADER USING PROGRAMNAME SCREENNO.
     IT_BDC-PROGRAM = PROGRAMNAME.
     IT_BDC-DYNPRO = SCREENNO.
     IT_BDC-DYNBEGIN = 'X'.
     APPEND IT_BDC.
ENDFORM.
FORM BDC_DATA USING FNAME FVALUE.
     CLEAR IT_BDC.
     IT_BDC-FNAM = FNAME.
     IT_BDC-FVAL = FVALUE.
     APPEND IT_BDC.
ENDFORM.
In session method, log file can be viewed.
Foll. is the example for session method.
REPORT ZBDC_BATCH1                                                 .
TABLES: ZEMPREC.
DATA : BEGIN OF STR1,
       EMPNO(3),
       EMPNAME(15),
       SALARY(9),
       DOJ(10),
       END OF STR1.
DATA: FNAME(100) TYPE C VALUE 'C:\EMPLOYEE.TXT.,
DATA : BDCITAB LIKE TABLE OF BDCDATA WITH HEADER LINE,
       MSGITAB LIKE TABLE OF BDCMSGCOLL WITH HEADER LINE.
OPEN DATASET: FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
perform open_group.
DO .
READ DATASET FNAME INTO STR1.
IF SY-SUBRC <> 0 .
    EXIT.
ENDIF.
perform bdc_dynpro      using 'ZBDC_BATCH' '9000'.
perform bdc_field       using 'ZEMPREC-EMPNO'
                                STR1-EMPNO.
perform bdc_field       using 'ZEMPREC-EMPNAME'
                                STR1-EMPNAME.
perform bdc_field       using 'ZEMPREC-SALARY'
                                STR1-SALARY.
perform bdc_field       using 'ZEMPREC-DOJ'
                                STR1-DOJ.
ENDDO.
CLOSE DATASET FNAME.
perform bdc_transaction using 'ZTCODE'.
perform close_group.
CLOSE DATASET FNAME1.
CALL TRANSACTION 'SM35'.
FORM open_group
FORM open_group .
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT   = SY-MANDT
      GROUP    = 'sample'
      HOLDDATE = SY-DATUM
      KEEP     = 'X'
      USER     = SY-UNAME.
ENDFORM.                    "open_group
FORM bdc_transaction
--> TCODE
form bdc_transaction USING TCODE.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE     = 'ZTCODE'
    TABLES
      DYNPROTAB = BDCITAB.
ENDFORM.                    "bdc_transaction
FORM close_group
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
ENDFORM.                    "close_group
FORM BDC_DYNPRO
--> PROGRAM
--> SCREEN
FORM BDC_DYNPRO USING PROGRAM SCREEN.
CLEAR BDCITAB.
BDCITAB-PROGRAM = PROGRAM.
BDCITAB-DYNPRO = SCREEN.
BDCITAB-DYNBEGIN = 'X'.
APPEND BDCITAB.
ENDFORM.                    "BDC_DYNPRO
FORM BDC_FIELD
--> FNAM
--> FVAL
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCITAB.
BDCITAB-FNAM = FNAM.
BDCITAB-FVAL = FVAL.
APPEND BDCITAB.
ENDFORM.                    "BDC_FIELD
Hope now u get an idea abt BDC.
Regards,
Router

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

Hi,
The movie is probably MPEG format.
QuickTime Pro and iMovie cannot transcode audio contained in MPEG movies.
Try to convert with SimpleMovieX or MPEG Streamclip instead.
http://www.aeroquartet.com/SimpleMovieX/
http://www.squared5.com
Regards, BJ

Servlet Life Cycle. .can anybody say whether this is correct or not

Hello everyone
Servlet Life Cycle.This is what i understood .can anybody say whether this is correct or not
According to sevlet specification,servlet life cycle has 4 stages
1)Loading and instantiation
2)Initialization
3)service the request
4)destroy
When we start webcontainer, webcontainer looks for deployed web applications and reads deployment descriptor of each web application.In the process of reading web.xml webcontainer container creates servletcontext object for holding context parameters and servletconfig object for holding servlet init-parameters after finding the servlet classes of the web application.
After finding the servlet classes webcontainer loads the servlet classes.
Loading can be done in 2 ways
1)When Webcontainer starts(loads) the webaplication by using load on startup in web.xml.
or
2)when first request comes for the webapplication
Say webcontainer starts the webaplication by using load on startup in web.xml ,Webcontainer creates an instance of servlet class and call init method of GenericServlet class by passing ServletConfig as parameter to init method i.e init(ServletConfig config).The code that is part of this init method initilize the ServletConfig variable of GenericServlet class and call init() method of GenericServlet class.
So when a request comes,webcontainer creates HttpServletRequest object,
HttpServletResponse object ,identifies the servlet class based onthe URL and
allocates a thread for the request and calls
service(ServletRequest req,ServletResponse resp) of HttpServlet class by
passing HttpServletRequest object, HttpServletResponse object as arguments.
Since req,resp are of type ServletRequest,ServletResponse they are type
casted to HttpServletRequest , HttpServletResponse and calls
service(HttpServletRequest req,HttpServletResponse resp) of HttpServletand
here request method is determined and either doGet()/doPost() methods are executed.
And finally when desroy method is called.

Mostly, but a servlet that has been initialized may service any number of 0 or more requests before being destroyed. So the life cycle might be:
1) Load
2) Initialize
3) Service a Request
4) Destroy
or
1) Load
2) Initialize
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
4) Destroy
or
1) Load
2) Initialize
4) Destroy
For any given <servlet> definition, you might have a combination of all:
1) Load (instance 1)
2) Initialize
4) Destroy
1) Load (instance 2)
2) Initialize
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
3) Service a Request
4) Destroy
1) Load (instance 3)
2) Initialize
3) Service a Request
4) Destroy
And for some Servlets with special configurations you might get:
1) Load (instance 1)
2) Initialize
1) Load (instance 2)
2) Initialize
1) Load (instance 3)
2) Initialize
3) Service a Request (instance 1)
3) Service a Request (instance 2)
3) Service a Request (instance 3)
3) Service a Request (instance 2)
3) Service a Request (instance 2)
3) Service a Request (instance 2)
3) Service a Request (instance 1)
3) Service a Request (instance 2)
3) Service a Request (instance 2)
3) Service a Request (instance 3)
3) Service a Request (instance 1)
4) Destroy (instance 1)
3) Service a Request (instance 2)
4) Destroy (instance 3)
4) Destroy (instance 2)
Finally, if you have multiple <servlet> entries in the web.xml (maybe with different servlet names and mappings) then you could have multiple parallel chains of this sort of life-cycle.
The key concept you have is correct. But once you understand that it is important to know that you really have no control over the lifecycle of the Servlet and that you should not assume anything about it.

HELP Identify this MP3 play

Hey guys,
I have had this Creative MP3 player for about a year now. After trying to put up with the pethetic battery life (30mins!) I would like to know what is wrong with it. But I can't even do that because I don't even know what it is called! I have tried the 'Identify your Product' page on this website but that didn't help. So please help me find the real name of this MP3 player and why its got such a bad battery life. All it says on the box is: "Creative Digital MP3 player" its 32mb with the option to add a 64mb MMC to expand it memory. Anyway heres a picture:
<IMG src="http://ascii24.com/news/i/hard/article/200/0/29/thumbnail/thumb220x270-images666975.jpg">
^The player itself^
<IMG src="http://ascii24.com/news/i/hard/article/200/0/29/thumbnail/thumb220x23-images666976.jpg">
^The box it came in^
Please help me!

Bizzymatt,
Looks like that is the wrong information for the player. The text says that it is for the CD-MP3 00 (which both my sisters own...great player). I will contact the proper authorities to see if we can get this changed.
Jeremy
P.S. The digital MP3 Player name is correct for this product. It was a player that was released in Asia a few years back. I don't think it was ever released in the America's or Europe.
Message Edited by Jeremy-CL on 02-3-2005 07:34 PM

Need help identifying this Kernal Panic

Can anyone tell where this might coming from? I was working in Photoshop and this happened twice. Any help would be greatful, this is my work computer. There are no usb or fiewire devices connected. Everything is standard on this machine with 2 gigs of RAM. Thanks!!!
Fri Apr 25 08:31:12 2008
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x0000000004BC7000 PC=0x0000000092DC01C4
Latest crash info for cpu 0:
Exception state (sv=0x46481c80)
PC=0x92DC01C4; MSR=0x00009030; DAR=0x04BC7000; DSISR=0x00000000; LR=0x008F8D20; R1=0x464E7B30; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x008F8D20 0x007BAF08 0x007BB1F0 0x007B37BC 0x007B71BC 0x007B7B64
0x00B150FC 0x00B16E64 0x0003F94C 0x000B05D4
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOSCSIMultimediaCommandsDevice(2.0.2)@0xb0c000->0xb27fff
dependency: com.apple.iokit.IOBDStorageFamily(1.5)@0xaeb000
dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(2.0.2)@0xaf2000
dependency: com.apple.iokit.IOCDStorageFamily(1.5)@0xad9000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.2)@0x7b2000
dependency: com.apple.iokit.IODVDStorageFamily(1.5)@0xae4000
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x7d3000
com.apple.iokit.IOATAPIProtocolTransport(1.5.2)@0x8f7000->0x8fcfff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.2)@0x7b2000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x8dd000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.2)@0x7b2000->0x7d2fff
Proceeding back via exception chain:
Exception state (sv=0x46481c80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2f6d2a00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:23:43 PST 2008; root:xnu-1228.4.31~1/RELEASE_PPC
System model name: PowerMac7,3
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B478 0x0009BE1C 0x00029DD4 0x000AF390 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x46481c80)
PC=0x92DC01C4; MSR=0x00009030; DAR=0x04BC7000; DSISR=0x00000000; LR=0x008F8D20; R1=0x464E7B30; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x008F8D20 0x007BAF08 0x007BB1F0 0x007B37BC 0x007B71BC 0x007B7B64

Hi-
Any SCSI devices attached?
SCSI card installed?
Other PCI hard drive controller card installed? (Often report as SCSI to the system).
The report indicated SCSI in the first line (and subsequent) following "backtrace", which is usually a good indicator of the source of the problem.

HT1222 My iPhone 5 keeps saying I don't have enough storage to update software even though I just purchased 15GB of storage. Can anybody please explain this to me? I'm really not tech savvy AT ALL so I don't have a clue what to do :(

My iPhone keeps telling me I don't have enough space to update my software. But I just bought 15GB of storage, of which 11.7GB is free! So I don't understand. Can anybody please help me? I'm really bad with technology so I don't have a clue.

Hi Caroline,
The storage issue you are having is not related to iCloud. The error is telling you that you do not have enough room on your device itself. You need to go to Settings>General>Usage, and under the Storage section at the top, it lists all of your apps and other things taking up room on your device.
You will have to delete or reduce the size of items on this list in order to free up some room for your update.
Also, you may want to try the update by hooking up your device to iTunes on the computer you sync with. It does not require as much free memory to update via iTunes as it does OTA.
Cheers,
GB

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can anybody come accorss this SLS not sis?

hi all gurus,
i am very thankful to u all
am getting everything from sdn...
can anybody explain about SLS not sis?
ok thank u
vasan

Sales is a process, which consist of sales cycle as under (in SAP):
Inquiry (Optional) - Transaction Code: VA11 / VA12 / VA13
Quotation (Optional) - Transaction Code: VA21 / VA22 / VA23
Sales Order - Transaction Code: VA01 / VA02 / VA03
Delivery (Create Delivery (Required), Packing (Optional), Picking (Optional), Post Goods Issue (Required)) - Transaction Code: VL01N / VL02N / VL03N
Invoice / Billing Document - Transaction Code VF01 / VF02 / VF03
Regards,
Rajesh Banka
Reward points if helpful.

I am getting the following error in DAC, can anybody look into this ?

Hi All
I am getting the following error in DAC while Registering Informatica Services & repository services in DAC ?
This is for RS(Repository services):
======================
Failure connecting to "BIA_RS"!
ANOMALY INFO::: Error while pinging informatica repository server
MESSAGE:::F:\DAC\bifoundation\dac\log\pmrepConnect.log (The system cannot find the file specified)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:100)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
This is for IS(integration services):
====================
Failure connecting to "BIA_IS"!
Can anybody please provide the solution for this ?
Regards
Srini
Edited by: Srini on Feb 26, 2012 4:58 AM

Check weather Your able to Ping Data warehouse, might be your ETL is not able to ping DW.

Need help identifying this video format

A lady on the east coast made a documentary video but said that it was filled with pauses, for some reason. I told her that I'd import it into FCP and edit out the pauses for her.
So she mailed me the DVD-R, and I tried to play it on my Mac, but DVD Player won't open it (a message appears saying "The media type is not supported.") Nor will the DVD player in a TV I have. Quicktime Player doesn't recognize it either.
So I have to figure out how to play this thing.
When I put the DVD-R into the Mac's optical drive, the icon of a DVD appears on the desktop. When I double-click on the icon, a window appears with a folder labeled DVD_VIDEO_RECORDER
Inside this folder is another one labeled VIDEO_TS
Inside that folder is a bunch of gray icons with "Exec" on them, labeled VIDEO_TS_BUP, VIDEO_TS_IFO, VIDEO_TS_VOB, and several labeled VTS_01_1.VOB, VTS_01_2.VOB., etc.
Can anyone help me identify what format this video is in, and what sort of a player can play it?

It's a DVD Video disc but it sounds like it was not "finalized" in the recorder that made it.
You might be able to extract the .VOB files (the only interesting parts) with MPEG Streamclip.
Read this: http://www.secondchairvideo.com/?p=739

Need help identifying this part!! MBP 13" i5 2.5gig

Hi all, I opened up my mac to try and fix a dent in the case. Accidentally knocked off the tiniest of pieces from the logic board and I have no idea what it is. It looks like this (the picture is zoomed in):
[IMG]http://i61.tinypic.com/2wnbtpj.jpg[/IMG]
Does anyone know what it is or what it does? Here is the piece in context with the rest of the logic board:
[IMG]http://i62.tinypic.com/2vj7xhg.jpg[/IMG]
Any help would be much appreciated!

Looks like a spacer or a pin on which another component sits to maintain separation from the logic board. Looks like there should be more than one, though.
Go to www.iFixit.com and find the tear-down pix for your MacBook Pro and see if it shows up in there.

Can anybody help identify this symptom? HELP!

Similar Messages

Maybe you are looking for