Can ANYBODY help me hotsync using OS 10.4.5?

I recently upgraded my Mac OS from 10.4.4 to 10.4.5, and now I cannot
hotsync with my Palm Tungsten E. I uninstalled and reinstalled the
latest Palm Desktop software, and then I reinstalled the Microsoft
Entourage Conduit. However, when I hotsync, I get an errror message in
the HotSync log telling me:
"Before you can synchronize with the applications on this handheld
device, you must enable synchronization in the Entourage Conduit
Settings dialog box. For the latest information on compatibility issues
and solutions, visit the Office 2004 Web Site synchronization failed"
This is odd, because synchronization is "enabled" in the Entourage
Conduit Settings dialog box.
Surely somebody else must have this problem as well? Can anybody offer any advice? I haven't been able to hotsync in two weeks. Posting to the Palm and Microsoft forums was no help.
Thanks,
Chuck

You are aware that permissions repairs & disk repairs are not the same thing, right? The "Repair Disk" step in Disk Utility attempts to repair file system problems, not the permissions of files in the file system. Disk Warrior is also a disk (file system) repair utility, one that uses a different & more powerful method (rebuilding the file system directory from scratch) than Disk Utility does to fix the file system.
If neither utility can repair your file system, you must (as the instructions in the first few lines of Disk Utility's First Aid tab tell you) back up & erase the disk volume. This will recreate a fresh file system that should be free of problems & allow you to install the OS, restore your user files from backups, & apply any updates to create a trouble free system.
If this fails, the most likely cause is even more severe problems with your hard drive than erasing a volume can solve. The next step would be to reformat it, & if that fails to replace the drive.
Before you consider anything as drastic as erasing anything, make sure your problem is not just with permissions but with the disk -- IOW, with the file system.

Similar Messages

In my iPad mini,when my use in app streaming , there is no sound.. Can anybody help? It used to be ok before. For example, there is no sound when I use YouTube clip in a news item or magazine like pulse..

nno sound when I use in app streaming

Hello Saranginotes,
After reviewing your post, I have located an article that can help with iOS audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

Unable to connect facebook using HTTP_CONNECTOR in Integrator. Can anybody help for connecting Facebook with Integrator.??

Hi,
I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
====================================================================================================================
ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
peer not authenticated
ERROR [WatchDog_0] - Error details:
org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
at org.jetel.graph.Node.createNodeException(Node.java:535)
at org.jetel.graph.Node.run(Node.java:514)
at java.lang.Thread.run(Thread.java:722)
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
at org.jetel.graph.Node.run(Node.java:485)
... 1 more
============================================================================================================
Can anybody help with this ??

Hi Brett,
I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:
and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

Is this a movie from iTunes? If so is it a rental or one you've purchased?

I recently upgraded to mac os x lion. But now my broadband pen doesn't work. I'm portuguese and i use the vodafone network. Can anybody help me?

Hello.
My name is Margarido and i'm portuguese. I use a mobile operator named zon to access the web using a broadband pen modem.
This operator uses the vodafone technical support (network) and since i upgraded to the Mac OS X Lion, the pen modem doesn´t work.
Can anybody help me?
I eared that Mac OS X Lion doesn´t support pen modems yet. Is this true?
Thank you.

Your best bet is to call the Vodafone technical support helpline. Since each manufacturer writes custom software for each OS. They might be working on new drivers...

I bought license for adobe creative cloud but i can't use any of the programs. I already used the 30 days trial and after that i couldn't use a single one of the programs. can anybody help me...

I bought license for adobe creative cloud but i can't use any of the programs. I already used the 30 days trial and after that i couldn't use a single one of the programs. can anybody help me...

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

I WAS USING I PHONE4 AND MY CAR KIT WAS WORKING PERFECT WITH IT VIA BLUETOOTH(RENAULT GRAND SCENIC 2011) BUT I BOUGHT THE NEW 4S AND EVENTHOUGH I CAN BE CONNECTED TO MY CAR KIT BY BLUETOOTH I CAN NOT HEAR IT ON MY CAR STREO.CAN ANYBODY HELP ME

I WAS USING I PHONE4 AND MY CAR KIT WAS WORKING PERFECT WITH IT VIA BLUETOOTH(RENAULT GRAND SCENIC 2011) BUT I BOUGHT THE NEW 4S AND EVENTHOUGH I CAN BE CONNECTED TO MY CAR KIT BY BLUETOOTH I CAN NOT HEAR IT ON MY CAR STREO.CAN ANYBODY HELP ME

Please stop posting in ALL UPPER CASE; it is considered SHOUTING, is harder to read, and is considered rude.
If you have not yet done so unpair the car kit from the phone, or better yet reset it completely, Forget the car kit in the iPhone, and pair it anew.

I am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

i am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system/tool to link the two togther and silently redirect any file operation on the old location through to the new one.
tt2

Can ANYBODY help me hotsync using OS 10.4.5?

Similar Messages

Maybe you are looking for