Can anybody help my iPod?
Ok, here is the deal. I got my Click Wheel iPod for 2004 Christmas... So I've had it all of 05, and now halfway through 06, so 1 year and a half.
The problems... the picture of a folder with an exclamation mark comes up...and below it, it has "www.apple.com/support/ipod" written
[img]http://f10.putfile.com/thumb/7/20615320954.jpg[/img]
Nothing has worked. I started by restarting my Computer and iPod. Ive reinstalled iTune, and upgraded iPod Software. Ive done everything. Ive restored the iPod software onto the iPod plenty of times.
After restoring my iPod, and plugging it into external power source, it goes through its boot up process, then the picture comes back.
[img]http://f10.putfile.com/thumb/7/20615320954.jpg[/img]
Ive restored the iPod, and it never works, it always goes back to the picture of a folder. Is my iPod done for?
Thanks in advance for help!
Sigh...using "Can anybody help my iPod?" as a subject line is not very helpful. We don't need the life history of your iPod. If we're here, we're frustrated and having to dig through vague posts is unnerving...ALL the posts will be about needing help with iPods. Yes, it would have been nice if you had told how you resolved the issue...grrr
Similar Messages
-
I have an 8gb ipod which has only 1200 songs on it, no photo's, no apps and no video's and it's telling me that my storage is full, can anybody help/
The number of songs that any iDevice will store depends on both the length/duration of songs and on the audio format(s) used. The figure of "1700" is nothing more than an estimate ... probably based on 3-minute songs and low bit-rates. There is no definitive number - your iPod's capacity is based on available memory (which, for an 8Gb iPod is actually around 7Gb). Best way to manage the content of your iPod is to create one or more playlists that are then used as the basis for sync operations (set this up when your iPod is connected).
-
i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
I have an ipod nano and would like to sync it to a new computer but when I try to do it, it tells me that i will loose all my music and pictutes in my nano to be replaced with what I have on itunes. can anybody help?
See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Basically you will have to transfer its contents to the new computer and then restore the iPod and then resync. An iPod can only sync to one iTunes library.
BTW you posted in the iPod touch forum. -
My Ipod wont play all of my songs they just stopped working. Can anybody help?
My ipod will not play all of my songs, they just stopped working, can anybody help me?
Do they play in iTunes n the computer?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I try to restore my ipod mini 4gb but i get the 1437 error? can anybody help me with this problem?
ok i have had the ipod fr a while and when i try and restore it gives me the 1437 error? i have no clue what this mean, can anybody help me? when is specifys the ipods components like the name and capacity etc.. under capacity it says N/A? get back to me please i miss having an ipod:((
I wish I could offer a solution, because I too am about to go crazy trying to fix the same problem. I have tried everything in the support section, sometimes twice, to no avail. Now I have an empty ipod that won't connect to my computer much less iTunes.
Any suggestions? -
My 4G Ipod shuffle does not play songs in the correct order? Already restored to factory settings and no success.. Can anybody help me?
I FINALLY GOT IT! after months of relentless synching/autofilling problems on my 4th generation i figured out the solution.
this is what i did: plugged in ipod on off mode~>manually deleting my ipod's songs~>restored factory settings~>unchecked automatic synch~>made a new playlist with exactly the songs & order i wanted for my ipod (just dragged old playlists into the new one)~>then autofilled that new playlist into my ipod. came out like a charm! (before u autofill UNCHECK random add songs)
my ipod always ended up autofilling/synching my customized playlists wrong or it would automatically do my music library (and that was way unorganized), so this worked. -
HT201570 Looking for a MSDS for a Ipod Nano 7th generation can anybody help?
Looking for a MSDS for a Ipod Nano 7th generation can anybody help?
Here, at the end of the site, you can find some environment specs from ipod nano 7th generation... hope this few informations could help you
http://www.apple.com/ipod-nano/specs.html -
About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
my ipod touch brightness just went to zero after charging it. i've tried adjusting it to 100% but it still does not changed. can anybody help me solve this problem? thankS!
Have yu tried the standard fixes:
- Resetting:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPOd via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem -
Ok so my new iPod Classic is repeatedly restarting itself and I see nothing on the screen But the Apple logo and I canny do anything to stop it can anybody help me
Try the DFU Restore method shown in Corrupt iPod classic.
tt2 -
My iPod touch shows that it is charging but it actually doesn't charge and I've tried to restore/ restart it because the only icon is the charging icon, the one with the battery icon with a bit of red fill and a small lightning icon below it. Can anybody help me and give me solutions before I go to an apple service center?
Place the iPod Touch into DFU mode. This will be similer to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the lastest iOS for your device.
Hopefully that sorts it if not, you will have to go to a sevice centre or call Apple Care up and get them to collect it and repair it. (replace it) -
I recently got a message saying I had 3 viruses on my iPod touch 5gen and it told me to go to a site to help get rid of them but I forgot it but it did say saveandroid? Idk if that was just a pop up or what. Can anybody help?
Alright thank you cause it was bothering me
-
I have been trying to put music I bought on Itunes on my Samsung Note 2 but my media player won't play m4p files so I tried to convert the files to mp3 but I couldn't, because a message says they are protected files. I then tried downloading different media player apps to see if they would play them but had no success.Can anybody help with a solution to this problem?
First quit iTunes and look in your iTunes folder.
On Windows, the iTunes folder is in your My Music folder.
On Mac, the iTunes folder is in your Music folder.
Follow this path: iTunes > iTunes Media > Music >
Here there should be all your music folders. Open the folders containing the music that is not playing. Right click "get info" (mac) or right click "properties" (windows).
This window will tell you the file type. iTunes will play music in AAC, MP3, and Lossless, etc.
If the files are .wma you will need to convert them into ACC or MP3 format for it to play on an iPod. In iTunes, highlight the tracks that you want to convert, then on the menu bar, Advanced > Create AAC/MP3 version and the tracks will convert. Delete the old files.
If the file extenstion is anything like .exe .txt .rar then you don't have an audio file. -
Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {8140112A-43D0-41D6-8B36-BE146C811173}
Description: Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address: 10.5.7.196
Subnet Mask: 255.255.0.0
Default Gateway: 10.5.0.1
DHCP Enabled: Yes
DHCP Server: 172.18.255.2
Lease Obtained: Tue Apr 23 10:14:40 2013
Lease Expires: Tue Apr 23 22:14:40 2013
DNS Servers: 121.97.59.7
121.97.59.2
121.97.59.3
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.
Maybe you are looking for
-
Dear All, I want following column wise Production Report (From Production Order) WARE HOUSE UOM COMPLETED Date(1,2,3,4,5,6,......31 ) Completed Qty. total qty Basically i want Pivot (dynamic) by date SELECT T0.[Warehouse], T0.[Uom], T0.[DueDate], T
-
Can someone help with a OpenCV DLL example?
OpenCV is an Open Source computer vision library released by intel. It is very handy for face reconition. There is a third party group called HyTek automation that created a commercial LV OpenCV wrapper called IVision, nice by if you just want to u
-
How to check the show base class members in teststand programatically using c#
I need to check the checkbox indicating show base class members in teststand using .Net adapter programatically through c#.can I get any help.Using CallMethod , I need to call a method "GetItemByName" .It is only possible by enabling the show Base Cl
-
How can I downgrade from OS X 10.8.4 back to 10.8.3 ?
I have several problems with 10.8.4: -The whole Microsoft Office Suite doesn't run anymore. Word, Excel, Powerpoint and Outlook crash after about 10 seconds. I didn't change anything on my computer except for the system update. (Other people seem to
-
Vivado Planahead, Zc7z045ffg676-1, unable to make HP bank 35 LVDS
Hi all, I am currently not able to get the Vivado Planahead tool (2014.2) to allow me to specify pins on bank HP 35 to be the LVDS standard. If I use this very simple xdc file set_property CFGBVS Vcco [current_design] set_property CONFIG_VOLTAGE 3.