CAN ANYBODY HELP WITH BOOTCAMP ON MAVERICKS? SINCE UPGRADING TO MAVERICKS BOOTCAMP DOESNT WORK WITH MY WIN7 DISC THE PARTITION STOPS HALF WAY THROUGH THEN CRASHES MY MAC PRO
SINCE INSTALLING MAVERICKS I HAVE NOT BEEN ABLE TO INSTALL WINDOWS 7 ON MY START UP DISC.... WHEN I GO TO INSTALL AND PARTITION THE DISC IT LOADS TO ABOUT A QUARTER OF THE WAY THEN MY MAC PRO CRASHES
Hey, I had windows 7 installed on my mac pro which is a 2013 model with the partition set at 80 and it worked fine then when i upgraded to mavericks with the free download and tried to access bootcamp windows 7 was gone so when i tried to upload it again thats when the trouble began, i have tried about ten times and even made a copy of windows and tried that but when i do my partition it loads to about a quarter of the way and crashes my hole computer were i have to press and hold the power button
Similar Messages
-
Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount
THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??
-
TS1424 I downloaded a Movie which stops half way through. How can I do it again
Can anyone help with this
If you purchased the movie from the US Store, you should be able to delete your current copy of the movie and redownload a fresh copy. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.
it seems to work when you reset the port
try this only after you've made sure that any antiviral/firewall software isnt blocking iTunes and the internet connection settings are fine
1. go to windows, accessories and right click on command prompt and run as administrator
2. type in netsh winsock reset (i know sounds ridiculous but it works type WITH SPACES) and press enter
3. Message saying "winsock reset successful now reboot your computer"
4. restart your computer, and open iTunes..backup should run much smoother and faster
5.Click on iTunes store might be working now -
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
Creative Cloud opening stops half way through with message: administrative privilege required.
creative cloud opening stops half way through with message: administrative privilege required.
It means what it says - you have to run as admin or a similar user with sufficient user privileges.
Mylenium -
my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!
Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
i have downloaded an album off iTunes and some of the songs stop half way they just go silent! should i buy the album again? or what can i do to fix it?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
I downloaded an album and on one of the songs it skips to the next song half way through the song... How can I fix this?
Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
I've bought a pack of self adhesive labels that I wanted to print up on my IMAC,running on Snow Leopard. However, I can't find a programme that will do this, nor can the personnel in the MAC shops. The labels are stuck on a normal sheet od A4, and I just want to print addresses on them. Can anybody help?
Are they Avery Labels? If so there are templates here:
http://www.avery.com/avery/en_us/Templates-&-Software/Templates -
i have been trying to update my iphone and when i tried to do so it said i needee to restore it first so tried this and since my phone just has the usb icon and itunes showing on it wont turn on or anything and half way through restore it comes up with an error message saying it cant complete it anybody know how i fix this please doin my head in
We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?
-
just need to reset it to factory settings because daughter forgot password..and when i try to do it through itunes to stops half way to say that i need to unlock the ipod..so please let me know if anyone can help me with this..ive already tried turning it off and then holding the home button while i plug the ipod to the computer and the itunes screen on the ipod comes up..i;m really hoping i don't have to go to an apple store..i live hours away from one..thanks!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
IPhone4 in recovery mode, restore stops half way through with an error message.
Hi, please help if you can. I have an iPhone 4 running the latest IOS which for some reason hung on start up with the Apple logo. It would get out of the loop, so got it into Recovery Mode, connected up for restore fine. This happens fine, then half way through the restore there is an error message, saying the restore cant be completed. I've tried it on three machines, different cables, different USB ports, and am now stuck.
Its unloced but not jail broken.
Thanks go your help.
NickHi there Parks4544,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
-Griff W. -
Issue with Apple TV stopping have way through a movie purchased from iTunes. Says "unexpected error occurred" and will allow us to go back and view earlier parts of the movie but not to go forward from this point. Any suggestions?
Having a very similar problem here. Apple TV Rental movie 2/3 way through. Great movie, though we had major download speed probs initially. Trouble is it now keeps on saying "unexpected error, try again later" or somesuch, and has done for several hours. Rental period finishes tomorrow when we'll all be at work. Night-time here in Australia. Thought we might be able to finish it on my Mac at least. Nup. Can't play AppleTV rentals on your Mac! Family not happy! No, that is understating it. Family ^*&^ing furious. "Why did you waste money on that thing when we could have got it out on DVD, or Netflicks, or Easyflicks, or just pirated it, or.....". I guess you get the picture!
-
Can anybody help with some subtleties to this code?
Hello,
I was wondering if anyone could take a look at the code in general for me, which is to go in an 'effects' pedal. The first while loop is for a footswitch that either reads high or low. It controls the mode of the pedal. the first mode is the default, where no signal manipulation occurs, and what comes in the audio input just comes out; the second mode stores data (fundamental frequency, average FFT amplitude from 3 kHz to 5 kHz) from the E string of a guitar, which is plucked after that mode is actuated; the third mode does the same for the A string; and the final mode takes in a note on the E or string, recognizes it as either on the E or A string, and adjusts the frequency content to be in tune based the data stored in modes 2 and 3. then the new magnitude vector is put through an inverse FFT and output through the DAC and sounded.
What I'm curious to know is, are there any blatant errors I've made? Will the signal coming out of the inverse FFT be sounded through the DAC? does it need to be changed from a double to an I32? I am trying to debug, but right now I'm having problems getting the correct output voltages on the Blackfin (the SPORT 0 pinout doesn't seem to match what is on the board....).
also, I was wondering if I will lose any phase information on the signal that I get out compared to the signal I put in. Will it be detectable by ear? Or would it all sound the same? along with the phase change for some signals, using an inverse FFT resulted in a loss of amplitude (from about 1 to on the order of 10^-5. that's a lot!). but when the test program was played on my computer, the phase change was not noticeable from the output signal, and neither was the magnitude change! the output played at the same volume as in the input, despite the waveform chart on the front panel showing an amplitude five orders of magnitude less! can you help explain that to me? what can I do, will it matter coming out of the Blackfin and into an amplifier?
i appreciate any input anyone can give me on all this!! thank you!!
Attachments:
102 project.vi 287 KBHi noahgrant,
I've had a look at your vi and can make some suggestions that you can try.
From what I can see, your while loop with the wait timer of 100 ms and continue if true condition on it (we shall cool this loop 1) will always keep running.
The other while loop (loop 2) is nested within a couple of case structures and will only run once (false to a continue if true condition). The default case has a different condition and will always run, instead.
From what I can make of this, loop 2 and all its case structures will only run once (except for case 0, default). WHEN it runs will depend on how it was compiled on the Blackfin - case structure/loop2 may go first or loop 1 will go first.
If you want loop 2 to go first (and only go once) then you need to link the output of the case structure to the input of loop 1 - this can be done by simply wiring up a boolean to it (data flow rules).
If you want loop 2 to always be checking the status of the mode then you need to place the whole case structure within a while loop, to run continuously.
That is a very quick interpretation of what you are trying to do. There are a lot of question marks (missing vi's) and some heavy use of local variables. I would consider using sub-vi's, in particular functional global variables (FGV's).
I hope that helps.
Maybe you are looking for
-
File generated in AL11 directory
Hi Experts, I have created a logical file path and assigned it to physical path in FILE transaction. I have also created logical file name and mapped it to Physical File name. The physical file name is "stock<YYYY><MM><DD>.csv" . But when I execute A
-
I am thinking of buying an Officejet 7610. I am running Windows 7 'x64 bit'.
I am thinking of buying an Officejet x64. I am running Windows 7 'x64 bit'. In the specifications it is stated that the maximum sheet size is 44" (1.01 metres) with Apple Computers, but only 19x13 " with Windows; why is there this difference, and can
-
The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.
-
Uncompiled Objects after Upgrade from 12.1.1 to 12.1.3
Hi, I have upgraded from a vanilla 12.1.1 to 12.1.3 on Linux 64bit and I am now experiencing a number of uncompiled database objects. I have compiled a number of them manually but a number are giving me the following error when compiling the package
-
Will a Lifeproof case for the iPhone 5 also fit the 5s?
I know that the fingerprint sensor wouldn't work, but other than that, would a Lifeproof for the iPhone 5 fit on the 5s?