Can anybody help with problems with Mail & Backup, please?

Hi, yesterday, for some reason, a problem developed with Mail.
Without me changing anything, while it will send and receive e-mails through my Apple account, it has stopped downloading emails from my BT account, which previously worked fine.
It keeps trying to log on to collect them (the rotating gear wheel beside the account operates) but nothing downloads. It is not the BT account which is at fault, since my iPhone, which is synched to the computer, downloads them fine.
Also, while I had been regularly getting advice from Backup that my storage disk was full and it was deleting an old backup, today Backup has told me that the disc is full and the backup has failed.
I cannot see anything in Settings which could obviously account for these changes.
i am a pretty new Apple user (a conversion I cannot claim has been a great success so far, and I would be grateful for any help you can provide.
Many thanks,
Neil

Export the folders/mailboxes and put them in the other users Public folder or go to the hard drive level user and put them in the Shared folder. You may have to reset permissions using Get Info (command - I). The other user can them import them.

Similar Messages

My Ipod doesn't sync songs anymore, can anybody help me out with this?

Hi all. Yesterday i did a Recovery on my computer and that wiped everything clean off of my computer, including the Itune program that i downloaded. And now, every since i downloaded Itunes again, it won't sync songs into my Ipod anymore. When i would download a few songs into Itunes, I would press on the sync button a message comes up saying that my ipod is synced with another Itunes library and can only be synced with one at a time. This won't let me transfer the songs onto my ipod. When i tryed to sync my songs again another message pops up saying to 'erase and sync'. Meaning that in order for me to sync the new songs onto my ipod, then they are gonna erase all of my existing songs that is currently on my ipod already! I don't wanna do that. I thought about restoring my ipod but i'm afraid that that would erase all of my songs off of my ipod as well. What do i do? Help would really be appreciated. Thank you.

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the restored/rolled back PC as a new library. If you sync the iPod with this new/different library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Itunes 64 bit wont install on my Dell XPS due to Windows Installer problems. Can somebody help me out with this?

I have Windows 7 home premium, running on a Dell XPS 15, with 64 bit OS, and when i went to install itunes for my new phone, it would almost install, but then say that it couldn't install due to issues with windows Installer. has anybody had this happen to them? can anybody help me out with this?

Many thanks.
"There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2).

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

I try to restore my ipod mini 4gb but i get the 1437 error? can anybody help me with this problem?

ok i have had the ipod fr a while and when i try and restore it gives me the 1437 error? i have no clue what this mean, can anybody help me? when is specifys the ipods components like the name and capacity etc.. under capacity it says N/A? get back to me please i miss having an ipod:((

I wish I could offer a solution, because I too am about to go crazy trying to fix the same problem. I have tried everything in the support section, sometimes twice, to no avail. Now I have an empty ipod that won't connect to my computer much less iTunes.
Any suggestions?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Can anybody help me to access Internet with my existing network

Dear All Recently I purchased new WRT 54G wireless router. Also I have tied up with new ISP to give wireless internet access to some of the my Higher authority employees only. My office network setup is as shown below Local Ip range : 172.18.0.0 to 172.18.2.254 subnet mask : 255.255.0.0 Default gateway : 172.18.0.50 Wireless Router configured as : 1) configured all ISP settings 2) configured LAN site setting( But I had to setup lan as 192.160.1.X i.e the required by ISP ). 3) connected ISP lan port of WRT54G to cable coming from ISP Modem 4) Connected Local port( any one of 4 ports) to my existing switch(existing LAN----172.18.x.x network) Now suppose I configure user laptop to access new ISP internet through wireless.I have done following setting Wireless LAN setting : Ip address : 192.168.1.2( I can give any IP of network 192.168.1.x) subnet mask:255.255.255.0 Default gateway :192.168.1.1 DNS : Automatic I can access the new ISP internet without any problem with WRT54g router. But the problem is while accessing the new ISP internet( Using 192.168.1.x/255.255.255.0/192.168.1.1 network),Also I want to access my existing network( 172.18.0.0/255.255.0.0/172.18.0.50). Since I am very weak in routing the network, can anybody help me out to do routing setting in linksys WRT54g router so as to access my New ISP internet using existing network( 172.18.0.0/255.255.0.0/172.18.0.50). Please help me anybody

O.K. Still the crucial question remains whether you want the separation of the ISPs enforced or not, i.e. do you actively want to prevent someone to switch to the other ISP simply by reconfiguring some settings on the computer or not?
If you don't want to enforce the policy and it is enough to just use different IP settings on different computers then this would probably be the easiest solution.
If you can, install a DHCP server (e.g. on a Linux box) inside your network which does the DHCP address assignments. That way you can dynamically assign the proper addresses to the computers.
You can then assign the WRT an LAN IP address inside the 172.18 subnet. The DHCP server assigns anyone addresses inside your 172.18 subnet. However, you configure different gateway and dns server addresses depending on the computer. You configure the MAC addresses of those 'preferred' laptops the gateway address of the WRT and the public DNS servers of the new ISP. All other computers you assign the old gateway address of the old router and the DNS server addresses of the first ISP.
If you don't want to install your own DHCP server you can assign either pool static IP addresses, i.e. assign all preferred laptops static IP address including the gateway address of WRT and use DHCP only for the normal computers or vice versa.
What won't work reliably is to run two DHCP servers on both routers and connect the LAN of both together. You'll end up with computers picking up the wrong IP address from the wrong DHCP server.
Again, this separation only happens due to the different configuration of the computers. If anyone can freely reconfigure the computer he has it is easily possible to change the gateway address and thus swap the ISP. But as long as people comply with the rules it works.
If you want to enforce the separation you will have to install another router between the two gateway router. This third router passes traffic from the WRT subnet for the 172.18 subnet and accepts the return traffic. In the opposite direction the router does not forward traffic. You should even be able to use a standard NAT gateway router and hook up the internet port to the 172.18 subnet and the LAN port to the WRT. You then configure a static route on the WRT to forward packets for 172.18 subnet to the third router. If the third router does not NAT then you have to configure another route on the first router to forward traffic for WRT subnet (192.168.1.*) to the third router as well.

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help ?
The fist Backup use for 260GB 15hours!
The Wifi ist Bridge configured.

We are still learning the quirks and bugs of this new box..
See the info here.. use accounts rather than disk or device password.. what happens.
https://discussions.apple.com/thread/5146963?tstart=0

I can't sign into iTunes on this pc so I can authorize it. I wan't to do this so I can transfer purchased iTunes music on my iPad mini to this pc. When I try to do this the response I get is just to try again later. Can anybody help me with this?

I can't seem to sign into iTunes on this pc so that I can authorize it. I want to do this so I can transfer purchased iTunes music on my iPad mini to this pc. The response I keep getting is to try again later but its been days so I don't think that is the problem. I know I am using the correct user name and password so I don't know what's wrong. Can anybody help me with this?

Hello
It seems as though your account has been hacked.
please contact Skype customer service and change your password.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

I urgently need a contact email for the sales team can anybody help me with this

I urgently need a contact email for the sales team regarding an outstanding query, can anybody help me with this please? Thanks in advance.

Hello
Welcome to the EE Community! I'm afraid there isn't an e-mail you can contact the EE Mobile Sales team on, but here's how you can get in touch with them:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Can anybody help me with iSight

Hi all … I'm new to this, but have been a mac user for years. Just recently had my eMac go on me so I have bought the iMac 17' Widescreen… I updated everything from my old mac to this one and then the computer wouldn't start… so I blanked the hardrive and start again by just transfering the email and settings over… updated to the latest patches from apple and instant my messengers from Yahoo and MSN and now my iSight camera doesn't work… doesn't turn on via the green light on boot up either… it just say when I launch Photo Booth or the others that uyuou can use it with, that it's being used by another program. Can anybody help me? Please save me?
Cheers Dave

Good plan, Dave.
Sorry iSight is still not working. You have been certainly been thorough in your efforts.
Before you visit your Apple Service Technician, you may want to check this Apple KBase article. Be certain that none of the apps that can use iSight are launching automatically because they have been set as System Preference... > Accounts > Login Items.
If that does not correct your problem, and if you did not use the "Combo Updater" after you reinstalled your system software, repair permissions and apply this Mac OS X 10.4.8 Combo Update (Intel) now. Finish with another Permissions Repair and check your iSight again.
Using the appropriate Combo Updater (there are different ones for iNtel and PowerPC Macs) to update to the most current version of Mac OS X often seems to correct problems that may persist after updating via OS X via the "Software Update..." feature.
If the above suggestions do not help, I can think of no better suggestion than the visit to the Apple Service Tech that you suggest.
It is very good of you to consider others that may share your problem. We will be watching for your report on how you get sorted.
Cheers,
Jim

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

Unable to connect facebook using HTTP_CONNECTOR in Integrator. Can anybody help for connecting Facebook with Integrator.??

Hi,
I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
====================================================================================================================
ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
peer not authenticated
ERROR [WatchDog_0] - Error details:
org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
at org.jetel.graph.Node.createNodeException(Node.java:535)
at org.jetel.graph.Node.run(Node.java:514)
at java.lang.Thread.run(Thread.java:722)
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
at org.jetel.graph.Node.run(Node.java:485)
... 1 more
============================================================================================================
Can anybody help with this ??

Hi Brett,
I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:
and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook.

Can anybody help with problems with Mail & Backup, please?

Similar Messages

Maybe you are looking for