Can anybody out there help shed some light on why no audio output using varispeed tempo only

Can anybody out there help shed some light on why no audio output using varispeed tempo only?
I am using Logic Pro 9 and finding no problems using the tempo and pitch option but when I just want to vari the tempo only I loose all output.
This includes no audio meter activity on channells.

Another worthwhile time/pitch related product is from Prosoniq. The version of Nuendo (not the latest) the University uses ships with the MPEX algorithm, which is related to to their flagship product.
http://www.prosoniq.com/www/TimeFactory_II.html
I've used it a bit to create the double-time/+1 octave Les Paul & Mary Ford guitar sound for a class demo demo and thought it did a very good job.
Yes, there is a Demo.

Similar Messages

Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

What does appear?

Is there somebody out there to shed some light on this? Change keys, tempo in Soundtrack Pro greyed out?

From the amount of posted unanswered questions like mine one should be able to see that there are more than a few people confused about the greyed out "Change keys, tempo in Soundtrack Pro" (and for that matter in Apple Loops Utility, Logic, GarageBand)! What does it take to help out the less adept budding beginners? Please don't post read the manual or search for... we all know you can spend days with no results. There is nothing better than a friendly person (wizard) who knows and has done it all, giving clear step by step instructions. Please lay it out for us lesser brains. Thank you so much for your time and patience.

rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= 'userName' ");
in this line i think there is some error put it like this
rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= '"+userName+"' ");
Try to put some SOPs in between, so that u can check in logs(if using tomcat)where u r making mistake.

My iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah- Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help?

I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.

ellerfrau wrote:
I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.
I'd suggest being more specific. What do you mean by "it seems to have thrown windows out of the system?" The Windows virtual machines should still be in the Virtual Machines folder in your documents folder. Are they there? What version of Fusion have you updated from and to?
You might also consider raising your question in the VMware Fusion forum: http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions&sta rt=0.

Hello, Can anyone out there help me? I tried updating my phone to ios 6.0 this morning and my phone did a factory default/reset. i lost hundreds of precious pictures and all my contacts. Is there anyway of recovering those items? Help please :-(

Hello, Can anyone out there help me? I tried updating my phone to ios 6.0.1 this morning and my phone did a factory default/reset. I lost hundreds of precious pictures and all my contacts. Is there any way of recovering my photos? Please Help :-(

Yes we did a back up, but it's a new computer and we can't find it anywhere on it. We had to "authorize" it through itunes, but still nothing. Thanks for the help

HT1711 When I try to play a song on I-Tunes I receive the Message "The Song can not be used because original can not be found" Can anyone out there help me with this?

When I try to play a song on I-Tunes, I receive the Message "The song can not be used because the original can not be found. Can anyone out there help me with this problem?

The iTunes application saves your iTunes Store purchases--as well as any music, audiobooks, or videos you import--to your computer's hard disk, not the iTunes application itself.
The error message you note indicates that the purchase in question can’t be located where it is stored in your iTunes Music folder in order to play it, and may have been moved or deleted.
You will need to help iTunes locate the file. Follow the steps in this article:
http://support.apple.com/kb/TS1967
This article may also be helpful:
http://support.apple.com/kb/TS1408

I am new to apple having worked with microsoft all these years. The switch was more for my photos. iPhoto seem to have changed my digital albums into tiff. All pictures are now in very small resolution. Can anyone out there help me retrieve my photos. Ta

I am new to apple software having worked with microsoft all these years. The switch was mainly for my photographs. Iphotos seemed to have changed all digital albums from jpeg to tiff format hence the very small resolution. Can anyone out there please help me recover these photos to origianal format???
Thanks
suvieve63

Gosh I am already tired of trying to retrieve this photo album and it seems like a waste of time and money spent on an apple IMac.
No disrespect intended but until you learn how iPhoto and Macs work you will continue to be confused and frustrated.
You say you want to create a book in iPhoto and have it printed by Apple, right. Have you finished creating the book in iPhoto? If so the Control (right) - click in the View all pages window background and select Save Book as PDF in the contextual menu?
Open the the PDF file with Preview and check for any errors or problems. If there are none you can order the book by clicking oin the Buy Book button at the bottom. Save the pdf file to compare with the printed book when it arrives in you feel there's a problem with it. That's all you need to do. There's no use of the Finder required.
OT

Can anybody shed some light on why there are no battery operated airprint printers?

I have been waiting for Airprint on a battery operated printer since the Airprint technology came available, but for some reason no one makes one. HP makes great battery operated printers but for some reason no Airprint capability. My only guess is that these printer manufacturers are being lobbied by other tablet makers no to include Airprint as it would make their tablets a better option. But with the market share that iPad commands I can see this as makeing any sense. Any ideas? The applications for this seem endless. How can we that want this option, effectively express this to manufacturers. I am supprised Apple hasn't come up with a solution for this!

That may be the reason, I did not think of that. Do you think that the power required for the AirPrint is much more than a Bluetooth connection? Surely technology these days would have a cure for that issue. We currently use an HP Officejet 100 and it has plenty of battery life (using Bluetooth). But it's not compatible with the iPad so stuck using a small laptop to take care of the printing jobs. I have all the apps in place on the ipad to do away with the laptop if only I could get an AirPrint enabled portable printer to handle the physical paper requirements of our operation.

Odd RV042 behavior can someone help shed some light?

We have a group of 4 x RV042 routers linking the 3 branch offices back to the head office via VPN site to site tunnels. Also each of the sites has dual ISP connection, one from a cable provider and the other a DSL connection operating in smart link backup mode with tunnels configured for when each wan is active. In the past week one of the branch offices RV042 started failing over to the secondary DSL WAN link when the primary cable ISP WAN IP was expired and was being refreshed.
The odd behavior starts a few hours after the switch over, the system log reports that the router restarted but with no error reported and it shows the date being December 31 2002 beginning with a System Up message then the firmware message which is at 1.3.12.19 and establishes a connection with the primary WAN at this point I can ping the public IP but I cannot connect to the router nor can the users at the branch browse the web or establish VPN connectivity to the main office. This condition persists until the router is physically powered down and back on at which time it shows the correct date and time and all operations work well for the day. I must note the behavior seems to only occur between 5am - 7am so I want to believe that this behavior is tied to the ISP IP lease cycle, but it only affects one branch office with all offices using identical ISP's, setup and configuration.
Can someone help make sense of this situation as rebooting the router each day is becoming annoying?

Hi Garth,
Thank you for posting. I wish I had a brilliant explanation for you that would immediately solve the problem. Unfortunately I have not seen this before. There is a possibility that the configuration file is corrupt or has been changed inadvertently. I think I would set the router to factory defaults and manually reconfigure it. There is also the option of swapping the router for another. If the other router does the same thing it could point to an environmental issue. If this router does the same thing at the alternate location it could point to either a configuration or hardware issue.

HT201209 Since updating ios7 I can't do FaceTime can anyone out there give me some guidance pleeeeaaaase

Can anyone help me since updating with the latest iOS for my iPad I can't do FaceTime and also when I go to camera I can't do video recording anymore been to settings to see if ther have been any obvious changes can't find anything that would cause this any help greatly appreciated

You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
Here is the information about your upgrade fee.
Upgrade Fee
It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

Can anyone out there help me figure out why I am having trouble opening a gray scale tiff in ID and

I have been opening tiffs and coloring them successfully for years, and all of a sudden it is not working. I made a logo in Illustrator, saved it as an ai, opened that in PS, saved as a grayscale tiff, and then opened it in ID. First the white background box was there, so I went back into Illustrator and knocked out group, then in PS preserved transparancy. I succeeded in losing the white box, but then in ID when I tried to color it, nothing happened. I checked all my ID settings, and just cannot figure out why this is happening.

Colorizing in ID works for NON-transparent grayscales or Bitmap mode raster files only.
A Bitmap mode image in a frame filled with [None] and colorized will appear transparent in the white areas, but you'll need to ad a clipping path for grayscale, or change the blend mode and live with overprints, which you probbly don't want.

Can anybody out there with a 6210 download maps wi...

Impossible to dowload mapsto my 6210 using Map Loader V2.02... "no connectionm to the server" message appears...
Tried many things... (several computers, sevral configurations, remove everything, install, unintall, re-install...)
What am I dfing wrong?
If you have a 6210 Navigator and can download maps, pls. tell me how to do it!
If you don't and can help, pls. post too.
Thanks a lot

Thanks, friend.
I've installed a new empty 2 GB card, run Maps once (it creates the file structure on the SD card)and tried to run Map Loader from PC Suite...
No success once more!
The message is the same "Connection to server interrupted. Check your internet connection or try later". [[I'm bored of retrying and waiting, by now...]]
May any Windows firewall config be related with this?
MIGHT ANY NOKIA GUY TRY TO HELP?
Thanks

Fe mode........can anyone out there help me........i am NOT a techie

i am trying to install a different printer but keep getting a message that windows installer is not correctly installed or is in safe mode...can anyone help me........i am not a techie by any means

1. It sounds like a windows issue, so I searched online and found this information (not a windows expert), but it sounds like what you are experiencing.
Windows Installer error
The Windows Installer service could not be accessed' on Windows XP?
When you attempt to install a program that uses Windows Installer, such as Office XP, you receive: "The Windows Installer service could not be accessed. This can occur if you are running in safe mode or if the Windows Installer is not correctly installed. "
This error is probably the result of a damaged registration service. To resolve this issue:
1. Open a CMD.EXE prompt.
2. Type msiexec /unregister and press Enter.
3. Type msiexec /regserver and press Enter.
2. Then you might want to try the the HP Printer Install Wizard. (I was not sure which C5100 you have, so be sure to select your model and Windows XP.
http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-C5100-All-in-One-Printer-series/115353...
I hope this helps!
Although I am a Hewlett-Packard employee, the comments I provide are my own.

Running through songs....can anyone out there help?

So, I have tried to reset, install the latest software, etc...here is the problem, as yet, unresolved...when I choose a song via albums or artists, it just runs through all of the songs and plays none of them. Has anyone heard of this before? THANKS in advance for any help and for taking the time to answer...ds

THANKS for the reply! It happens when I go to albums or artists, and choose a song to play...it just scrolls through the remaining songs and does not play them, or if I choose the last song on the list, just goes back to the main menu. If I play from the All Songs list or the purchaed music playlist it works fine...very weird...I was thinking of just restoring the whole iPod and reloading it with software, etc, I just do not know how to do that...thanks for your time!
-ds

Can anybody out there help shed some light on why no audio output using varispeed tempo only

Similar Messages

Maybe you are looking for