Can anybody please guide to take the course of SEM

HI
Can anybody guide me to take the course of SEM. I have been working as a BW Consultant for the last 4+ yrs, out of which I have been with BI for 1.5 yrs. Can I go for SEM now. Is it suit for me as a BW CONSULTANT. Some guys saying it is purely for FICO Consultant.
Please guide me to take my career forward. Please guide me.
sai

Greetings Sai,
SAP Strategic Enterprise Management (SEM) refers to a number of capabilities within the Enterprise Resource Planning (ERP) software and would not be covered in a single course.
You may want to look at the different courses offered for NetWeaver Business Intelligence if you are looking to grow your understanding of BI and BW. There are a number of course that could be very helpful for you.
If you are more interested in the Strategic part of SEM, there is a new product called SSM, SAP Strategy Management, which is not part of SEM, it is a separate application. You can learn more about SSM and the SAP solutions for performance management by visiting the CPM page on the BPX site:
https://www.sdn.sap.com/irj/sdn/bpx-cpm
While SAP does offer a number of eLearning courses that can be taken online, many of these courses will be instructor-led in a classroom environment.
Not knowing where you call home, please visit your COUNTRY SITE from the SAP.COM website. Under SERVICES, click on EDUCATION and find the courses offered in your area.
Hope this helps!
Regards,
Bob

Similar Messages

Is it possible to drive REXROTH pneumatic actuator which requires 24V & 500mA,, using LabVIEW ? if Yes, can anyone please guide me regarding the same ? I'm doing my project , so badly need info.

Hello,
I'm doing project which requires pneumatic actuator. Available actuator in our college is REXROTH BOSCH pnuematic actuator. which requires 24V and 500mA drive. Also it has to be timing controlled (I mean it should be ON & OFF, software controlled)
I have attached snap of my LabVIEW block diagram. Here, comparator output has to drive Pneumatic actuator. Also we have NI 9485, 8 channel Solid State Relay (SSR), is it possible to use it in my project?
Thank you, your help is much appreciated...
Attachments:
ni help.jpg ‏35 KB

I apologize for my mistake,
I'm new to this community...
Image which I've tagged , contains 2 O/Ps from comparator.. I need to drive actuator from those O/Ps...
After processing Image & calculating number of particles, depending upon those numbers, i want to drive Actuator which i've specified earlier...
thank you for your time... help appreciated...

HT201210 My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015

Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help?

Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help? Going around in circles! Grrrrrrrrrrr

Is this your machine or the company's? Machines that came with Snow Leopard or earlier installed come with system and software install disks that can be used to reisntall the iApps that came with the machine orignally.
If this is your machine and it came with Snow Leopard or earlier installed the disk will look slimialr to one of these:
If it is the company's machine see if they have the disks.
Do a custom install and then use Software Update to update iPhoto to the highest version that is available.

Can anybody please help me to find out the link where small co.

can anybody please help me to find out the link where small companies implementing saps.

Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram...

I am running Yosemite 10.10.2 on my Macbook Pro. In the game center app I can not access my account. Clicking on the username does not help - it looks like it's stuck. Can anybody please help me? Thanks in advance.

I am running Yosemite 10.10.2 on my Macbook Pro. In the game center app I can not access my account. Clicking on the username does not help - it looks like it's stuck. Can anybody please help me? Thanks in advance.

Someone in another section answered this. Thanks.

I would like to build a desk top computer for video editing, business management and online learning and also have a small compatible laptop or tablet or ipad to take to university, Can someone please advise me of the best set up for this?

I would like to build a desktop computer for video editing, business management and online learning and also have a small laptop, tablet or ipad to take to university, Can someone please advise me of the best set up for this?

Let's see if I understand this... You're asking for advice on building a desktop computer, in the Apple developer's forum? Why not just buy a Mac?

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Security questions:
https://discussions.apple.com/docs/DOC-4551

Can anybody please suggest the way i can get all the indexes on a cache

Can anybody please suggest the way i can get all the indexes on a cache?

Hi,
If you want to just see what there is at the moment, the StorageManager mbean IndexInfo attribute shows the toString() representation of the extractor of each index.
If you want to get it programmatically, you can get hold of it by sending an entry-processor to a key, then casting the entry to BinaryEntry, and calling BinaryEntry.getBackingMapContext().getIndexMap() to get the same Map<ValueExtractor,MapIndex> of indexes which the index aware filters get.
Best regards,
Rob

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new. If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

My CS5 start up splash gets stuck at 'Reading fonts...ABSALOM', can anybody please help

My CS5 start up splash gets stuck at 'Reading fonts...ABSALOM', can anybody please help

Fritz,
You may try the list, especially 4) or 6).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT3777 I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation.

I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.

You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less.

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

Can anybody please tell me what is escapse sign ( check box) external data

Hi ,
Can anybody please tell me , What is Escape Sign (check Box) in external data tab in infopackage
Thanks
PP

Hi PP,
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
Example:
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
Hope this information helps u.........
Assigning Points is the way of saying Thanks in SDN
Regards
Ramakrishna Kamurthy

Hi guys, my bridge is suddenly telling me i cant edit in raw because a qualifying product need to be launched. can anybody please tell me how to fix that?

hi guys, my bridge is suddenly telling me i cant edit in raw because a qualifying product need to be launched. can anybody please tell me how to fix that?

I wonder if this is to do with the Camera RAW 9.0 update. The timing sounds right.
Check out your Bridge > Preferences > File association for CR2 files
You can reset Bridge Preferences the same way as with Photoshop:
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Can anybody please guide to take the course of SEM

Similar Messages

Maybe you are looking for